두개의 유니모프 진동자를 이용한 새로운 형상의 마이크로 초음파 리니어 모터를 제안하였다. 유니모프 진동자는 금속판에 판상의 압전소자가 접착되어 있으며, 두개의 유니모프 진동자가 삼각형상의 진동 커플러에 의해 연결되어 스테이터를 구성한다. 스테이터는 두 가지 진동모드(대칭모드와 비 대칭모드)를 가지고 있으며, 이 두 진동모드가 축퇴되도록 설계하였다. 스테이터의 대칭모드와 비 대칭모드를 위상차 $90^{\circ}$로 여진시킴으로써 이동체의 직선(또는 회전) 운동을 발생시킬 수 있다. 시작기 모터는 놀이 0.9 mm, 폭 1 mm, 길이 7.5 mm이며, 구동전압 $100V_{op}$, 구동주파수 300 kHz로 구동되어, 모터 최대속도 0.3 m/s, 최대 추력 6 mN을 달성하였다.
이 논문에서는 최근 다시 주목을 끌고 있는 압전소자를 이용한 에너지 획득에 대한 개념을 한 진동원에 응용하여 그 에너지의 이용가능성을 분석해 보고자 한다. 에너지 획득기로는 가장 일반적으로 사용되고 있는 유니모프 압전 캔틸레버 벤더를 사용한다. 먼저 압전 에너지 획득기에 대해 base excitation에서의 거동을 이론적으로 분석하고 실험실내에서 수행할 수 있는 압전 에너지 획득기를 제작하여 가진기 상에서 발생하는 전력을 측정한다. 시뮬레이션과 실험결과를 통해 진동에너지로부터 획득한 전기에너지가 각종 센서는 물론 기계부품들의 진단시스템에 필요한 전원을 공급할 수 있음을 알 수 있다.
This paper deals with the performance evaluation of piezoelectric unimorph actuator. In the unimorph design, the thickness ratio of substrate to piezoelectric material and the elastic modulus ratio of substrate to piezoelectric material are important parameters. There exists only one structural configuration that satisfies the optimal condition among them, and actuators using that configuration exhibit better actuating displacements. Another design parameter is the piezoelectric coefficient which can be improved due to the induced tensile stress and voltages. The application of the tensile stress to the piezoelectric material makes it get higher piezoelectric coefficient and the total displacement performance of the unimorph actuator is improved. Finally, the piezoelectric actuator system with spring elements is fabricated and it shows higher actuating displacement capability.
This paper proposes a novel curved shape piezoelectric unimorph using a new fabrication method. Instead of using thermal coefficient mismatch, which has been used for conventional processes for curved shape unimorphs, we used pre-stressed substrates and the room temperature adhesion process. A difference of the mechanical strains between the substrate and the piezoelectric layer makes the final manufactured unimorph get curved. Several performance tests of the proposed unimorph actuators were accomplished and the test results showed the proposed unimorph actuator got comparable actuation capability compared with conventional curved shape actuators.
본 논문은 기존의 유/공압 및 전기식 모터를 대체할 수 있는 경량, 고성능 지능소자 구동기를 설계/제작하고 이를 소형 무인비행체의 조종익 시스템에 적용 가능성을 연구한 것이다. 또한 압전 복합재료 작동기에 대한 성능평가를 수행하였으며, 유니모프 및 바이모프 형태의 작동기를 제작하여 각각의 작동 특성을 확인하였다. 이와 같은 성능시험 평과 결과를 통해 바이모프 형태의 작동기가 하중 유무와 무관하게 선형적인 받음각 변화를 가짐을 알 수 있었다. 이러한 지능소자 구동 시스템은 소형 로봇, 유도무기 및 MAV, UAV의 조종익 제어 시스템으로 사용될 수 있는 가능성을 확인하였다.
전기변형(electrostriction)이란 물체에 전압을 인가했을 때 맥스웰 응력이 나타나고, 이로 인하여 물체가 변형되는 현상을 말한다. 이러한 성질은 대부분의 유전체에서 나타나는데, 특히 탄성계수가 낮은 엘라스토머에 적용하면 전기에너지가 효율적으로 변환되어 큰 변형과 힘을 발현한다. 이렇게 전기변형을 크게 일으키는 고분자를 전기변형 고분자(electrostrictive polymer, EP)로 분류하며, 이들은 구동체 및 센서, 인공근육, 음향전달 장치 분야로의 활용이 유망한 재료로 예견되고 있다. 본 연구에서는 폴리우레탄과 아크릴 고무 등의 유전성 탄성체(dielectric elastomer)를 이용하여 전극-EP-전극의 적층을 이루는 유니모프 구동체를 제조하여 구동시켰고 주파수를 증가시키면서 작동시킬 때 구동체의 운동범위가 감소하는 현상을 전기적, 기계적으로 해석하고자 유전율과 탄성율을 주파수에 따라 측정하는 한편, 고전적 적층이론을 이용하여 EP의 구동역학을 모델링 하였다. 실험결과, 주파수 증가에 따른 구동체의 운동 변위 감소는 재료의 유전 완화시간과 밀접한 관계를 가졌음을 알 수 있었고, 고전적 적층이론으로 해석한 유니모프 구동체의 운동은 실제 적용한 우레탄 구동체의 운동과 상당히 유사한 거동을 보였다.
In this article, the constitutive relations of three types of piezoelectric benders, which are a unimorph bender, a bimorph bender and a triple-layer bender, are derived based on the beam theory under the quasi-static equilibrium condition. The relation coefficients are described as the geometry and material properties of the benders. More general constitutive relations involving fixed-free, fixed-roll, and fixed-simply supported boundary conditions under the inconsistent length condition between the piezoelectric layer and the nonpiezoelectric one are discussed. The complicated constitutive relations can be easily calculated and checked by using the symbolic function in ‘Mathematica’. The relation coefficients for the benders are plotted in three dimensional graph using the developed program.
The actuating performance of plate-type unimorph piezoelectric composite actuators having various stacking sequences was evaluated by three dimensional finite element analysis on the basis of thermal analogy model. Thermal residual stress distribution at each layer in an asymmetrically laminated plate with PZT ceramic layer and thermally induced dome height were predicted using classical laminated plate theory. Thermal analogy model was applied to a bimorph cantilever beam and LIPCA-C2 actuator in order to confirm its validity. Finite element analysis considering thermal residual deformation showed that the bending behavior of piezoelectric composite actuator subjected to electric loads was significantly different according to the stacking sequence, thickness of constituent PZT ceramic and boundary conditions. In particular, the increase of thickness of PZT ceramic led to the increase of the bending stiffness of piezoelectric composite actuator but it did not always lead to the decrease of actuation distance according to the stacking sequences of piezoelectric composite actuator. Therefore, it is noted that the actuating performance of unimorph piezoelectric composite actuator is rather affected by bending stiffness than actuation distance.
수중 음향 벡터센서는 음압 뿐 아니라 음파의 진행 방향에 관한 정보를 측정할 수 있는 센서이다. 본 논문에서는 미세 외팔보를 이용한 수중 음향 벡터 센서를 구현하기 위해 음향학적 이론을 바탕으로 음향과 기계 구조물의 상호작용을 이론적으로 정립하고자 하였다. 감응 방식으로 압전 효과를 이용한 두 가지 유니모프(unimorph)형태의 모델을 제시하였으며, 제시된 모델에 대하여 압전 미세 외팔보의 거동을 집중 질량 모델을 통해 음파가 임의의 주파수와 각도를 가지고 미세 외팔보로 입사할 때 나오는 신호의 크기를 구할 수 있는 전달함수를 유도하였다. 또한 이를 바탕으로 매우 얇고 유연한 구조물로 미세 외팔보를 설계하면 매질의 입자 속도에 관한 정보를 직접적으로 측정 가능한 센서로 활용할 수 있다는 것을 확인하였다.
본 연구는 압전 작동기 기반 초소형 날갯짓 비행체의 날갯짓 운동을 위해, 압전 작동기의 펌핑 운동을 효과적으로 날갯짓 운동으로 변환하는 힌지 메커니즘 제작 기법에 대해 다루었다. 경량화를 위해 탄소섬유/에폭시(Graphite/Epoxy) 프리프레그를 사용하고, 반복적인 제작이 용이하도록 레이저 절단기를 활용하였으며, 힌지부는 얇은 캡톤 필름을 이용해 컴플라이언트(compliant) 메커니즘으로 구성하였다. 제작된 힌지 메커니즘을 압전 유니모프 작동기 PUMPS에 연결하여 동작시켜 본결과, 300V 170Hz 인가 전압에서 $173^{\circ}$의 큰 날갯짓 각을 가짐을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.