• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.168-168
• /
• 2010

DCM derivatives were newly synthesized. The OLEDs with a DCM-A as an emitting layer was fabricated and analyzed their opto-electrical properties. The structures of OLEDs were I) ITO/DCM-A/Al, II) ITO/-NPD/DCM-A/LiF/Al, and III) ITO/-NPD/DCM-A/Alq3/LiF/Al. The EL peak of the DCM-A shows the red emission in the range of 700 nm. The structure I) shows that 1050 nW/cm2 at 510 mA/cm2. The structure II) shows that takes the most excellent luminance about 39,000 nW/cm2 at 290 mA/cm2. The EL structure ill shows luminance about 13,000 nW/cm2 at 6 mA/cm2.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1563-1565
• /
• 1997

Electroluminescence(EL)devices based on organic thin layers have attracted lot of interests because of their possible application as large-area light-emitting display. One of the problems of such devices is lifetime of the cell, where the degradation of the cell is partially due to the crystalliyzation of organic layers. In large part, this problem can be solved by using a multilayer device structure prepared by vapor deposition technique. In this study, blue lightemitting multilayer organic electroluminescence devices were fabricated using Poly (9-vinyl-carbazole) (PVK) and 2-(4'-tert-butylpheny])-5-(4"-bis-phenyl)1,3,4-oxadiazole (PBD) as hole trasport and electron transport material, respectively, where tris(8-hydroxyquinolinate) aluminum (Alq3) was used as a luminescenct material. A cell structure of glass substrate/indume-tin-oxide(ITO)/PVK/$Alq_3$/PBD/Mg:In was employed.

• Korean Journal of Materials Research
• /
• v.13 no.8
• /
• pp.514-518
• /
• 2003

As a fundamental study on organic electroluminescence(EL), blue emitting materials were synthesized and characterized. Individual blue colored hydrazone derivatives were synthesized from the reaction of aldehydes (phthalaldehyde, isophthalaldehyde) with the corresponding amnios (1-methyl -1-phenylhydrazine, 1,1-diphenylhydrazine hydrochloride). Recrystallization of hydrazones from chloroform revealed the melting temperature within $142∼156^{\circ}C$. Photoluminescence(PL) analysis on each hydrazone showed that emission range were blue(458∼478 nm). The structure of obtained hydrazones were elucidated by FT-IR, $^1$H-NMR and C, H, N elemental analyzer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.525-528
• /
• 1997

In this study, Eu(TTA)$_3$(phen) was synthesized and its films were prepared by vapor deposition method. Its films were characterized by UV-Vis absorption spectroscopy, Atomic Force Microscopy(AFM) and Photoluminescence(PL) measurements. Their electroluminescent(EL) characteristics were investigated by PL measurements, where a cell structure of glass substrate/ITO/Eu(TTA)$_3$(phen)/Al was employed. It was found that its films were well prepared without any decomposition and the film thickness could be controlled by adjusting the amount of Eu(TTA)$_3$(phen) in a boat. The EL spectrum of these films was almost the same as that of PL spectrum of these films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.166-169
• /
• 2000

The Organic Electroluminescence (OEL) device, that was consisted of ALq3(8-hydroxyquinoline aluminum) and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine), has been used. We investigated characteristics of brightness and current density about OEL that was oxidated each layers. We used two samples that were fabricated each continuous and non-continuous method. Emission was observed above 10mA/$\textrm{cm}^2$ and luminance was measured to be 1530cd/$\textrm{cm}^2$ at a current density of 100mA/$\textrm{cm}^2$. A luminance of over 2600cd/$\textrm{cm}^2$ was also observed after the final fabrication process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.831-834
• /
• 2000

Characteristics of organic light-emitting diodes(OLEDs) were studied with devices made by PECCP[poly(3,6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)] Langmuir-Blodget(LB) films. The emissive organic material was synthesized and named PECCP, which has a strong electron donor group and an electron accepter group in main chain repeated unit. The LB technique was employed to investigate the identification of the recombination zone in the ITO/PECCP LB films/Alq$_3$/Al structure by varying the LB film thickness. PECCP was considered as an emissive layer and Alq$_3$was used as an electron-transport layer. We measured current-voltage(I-V) characteristics, UV/visible absorption, PL spectrum, and EL spectrum of those devises.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.6
• /
• pp.17-23
• /
• 2000

In this study, we prepared red organic light-emitting-diode(OLED) with a fluorescent dye(Sq)-doped and inserted between emission and cathode layer 1,3-bis(5-p-t-butylphenyl)-1,3,4-oxadiazol-2-yl)benzene (OXD7) or/and tris(8-hydroxyquinoline) aluminum ($Alq_3$) layers for increasing electroluminescent(EL) efficiency. This inserting effect has been observed and EL mechanism characteristics have been examined. The hole transfer layer is a N,N'-diphenyl-N,N'-bis-(3-methyl phenyl)-1,1'-diphenyl-4,4'-diamine (TPD), and the host and guest materials of emission layer is $Alq_3$ and bis[1-methyl-3,3'-dimethyl-2-indorindiylmethyl] squaraine (Sq), respectively. For the inserting of $Alq_3$, emission efficiency increased. But we can not obtained highly pure red emission owing to the emission of inserting $Alq_3$ layer. The inserting of OXD7 makes hole block and accumulate. Because of increasing recombination probability of electron and hole, highly pure red color can be held. Simultaneously brightness characteristics and emission efficiency could improve.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.755-760
• /
• 2008

영상 Display의 시장 동향과 기술 동향에 대하여 기술하였다. 영상 Display 로서는 그밖에 유기 EL(Electroluminescence), FED(Filed Emission Display) 등이 있고 차세대 Display도 개발이 진행되고 있다. 양자 모두 스스로 발광하는 형태를 취하기 위해서는 Back Light가 필요하지 않고, 박형과, 넓은 시야각, 또한 응답 속도가 빠르고 때문에 액정 Display 보다 유리하리라 판단된다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.335-336
• /
• 2000

도시 대기는 복잡한 성분을 가진 입자상 물질로 이루어져 있는데, 검댕 입자나 비산재(fly ash)등과 같이 일차오염물질과 복잡한 대기 화학반응에 의해 생성되는 이차오염물질이 혼재하고 있기 때문이다. 도시 대기 중의 입자상 물질은 대부분 황산염, 질산염, 암모늄염 입자상 물질과 유기 입자들로 구성되어 있는데, 탄소 입자는 도시의 미세 입자 중 거의 반 정도를 차지한다. (Ro et. el., 2000) 본 연구에서는 서울 대기에서의 입자상 물질에 대한 분석을 EPMA(Electron Probe X-ray Microanalysis)를 이용한 단일 입자 분석법(Single Particle Analysis)을 가지고 행하였다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.30-30
• /
• 2000

당사는 각종 진공 장비를 개발/제작한 경험을 바탕으로 25년 동안 진공 산업 발전에 기여하여 왔으며 자체 기술로 HIGH VACUUM 응용시스템 설계 및 제작하고 있다. 이와 함께 3D CAD를 이용한 consulting 및 Modeling 분석을 수행하여, 자체 기술로 설계 및 제작 판매하고 있다. Vacuum System은 In-line System (ITO, SiO2, Cr Tio2, Ag, Al 등), Roll to Roll(Web) Sputtering system (ITO, SiO2, Ar, Metal 등), 유기 EL 박막 진공 증착 장치, PECVD System, Evaporator 시스템 등을 제작 공급하고 있다. 현재 Roll to Roll(Web) Sputtering System은 Dual Cathode를 사용하는 방식으로 개발중에 있으며, 평판 디스플레이용 대면적 Glass를 위한 In-line Sputtering System을 같이 개발하고 있다.