• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.4
• /
• pp.639-646
• /
• 1997

The contents of free sugars, organic acids, amino acids, total carotenoids and pectin of pumpkin were analysed. Weight percentage of flesh was 84% of total weight. Rind and funicular attachment of seed were 10% and 3.5%, respectively. Major free sugars in pumpkin were fructose, glucose, sucrose. In flesh, fructose and glucose were the major free sugars, corresponding to 87% of total free sugars . Total sugar content in the flesh was three times higher than that in the funicular attachment of seed. Contents and composition of free amino acids were quite different according to the different parts of pumpkin. Non-volatile organic acids in pumpkin was malic, succinic and fumaric acid. The major acid in the flesh and funicular attachment of seed was malic acid and the contents in these parts were 85.2mg% and 226.5mg%, corresponding to 63% and 70% of the total organic acids, respectively. Eigh-tyseven percent of total carotenoids in the pumpkin was in the funicular attachment of seed, amounting 65.3mg%. However flesh and rind contained 6.6mg% and 3.3mg%, respectively. Water soluble pectin consisted 58% of the total soluble pectin in different parts of pumpkin, and soluble Pectin content was higher in funicular attachment of seed than in flesh. The major neutral sugars of the pectin in flesh and funicular attachment of seed were galactose and glucose consisting 45% and 36.5% of total neutral sugars.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.62-72
• /
• 1998

This study was performed to characterize the trace organic pollutants in the industrial wastewater and to establish the database of the trace organic pollutants. The four manufacturing industries, which are refined petroleum, industrial chemicals, rubber & plastics and fabricated metals, were surveyed. The wastewater and discharging water of these 30 factories are analyzed to characterize the trace organic pollutants. In industrial chemicals, the kinds of products and organic pollutants are very various. Therefore to select the characteristic organic pollutants in this categories are also very difficult. In industrial chemicals, the gas chromatograpic peak patterns of wastewater are represented the various type according to their products, therefore the typical patterns of the characteristic organic pollutants could not be obtained because the kinds of manufactured goods and organic pollutants are very various. In refined petroleum, the effluent is discharged in the distillatory process of atmosphere pressure and contained the saturated hydrocarbons, phenol compounds, benzene compounds and naphtalene compounds. The saturated hydrocarbons peaks from $C_{15}$ to $C_{35}$ are represented the typical oil patterns by the uniform intervals therefore the peak can be easily distinguished. In rubber & plastics, the wastewater is discharged in the washing process which contains the additives. The problem of wastewater is not serious because the manufacturing process is not produced the effluent or the produced cooling water is recycled in that process.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.49-59
• /
• 2004

Organic smectite was hydrothermally synthesized by treating the opal-rich siliceous mudstone from the Pohang area with TMAOH solutions and 1:1 solutions of TMAOH+NaOH at $80^{\circ}C$ and concentrations ranging 10∼15%. Smectite was solely formed without accompanying any mineral products in case of TMAOH, whereas NaP and hydroxysodalite was synthesized together with smectite under the blending solution of TMAOH+NaOH. The synthesized smectite is identified as an organic smectite intercalating $TMA^{+}$ within its interlayer site, specifically corresponding to monmorillonite species, through mineralogical characterization by XRD, DTA, and IR analyses. The experimental results indicate that main precursor of the synthesized smectite is undoubtedly opal-CT, and the original sedimentary smectite included as considerable amounts in the mudstone seems to play a major role as Al-sources necessary far the smectite formation. Original inert components such as quartz and mica do not affect mostly to the synthesis reaction, and thus, are resultantly found as impurities in the synthetic products. These experimental results may imply that a new effective method for the low-temperature (less than $100^{\circ}C$) hydrothermal synthesis of organic smectite will be established if some Al-sources adequate for this synthetic system are available.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.241-244
• /
• 2003

유류오염 토양내 유류의 분해와 무기오염물질의 함량과의 관계성을 알아보기위해 부산 문헌지구의 유류 오염 토양 profile중 유류가 비교적 많은 두 층과 유기물이 다량 함유된 제주도 토양을 경유로 오염시킨 토양을 선택하여 유류가 분해 정도와 Pb, Zn, Cd, Ni의 함량을 측정 비교하였다. 토양 채취후 즉시 유류를 추출한 것, 15일간 별도의 미생물 영양원을 가하지 않고 습도와 통풍만을 행하여 토양내 존재하는 미생물들에 의하여만 유류가 분해되도록 한 것, $105^{\circ}C$에서 24시간 열처리를 행하여 미생물에 의한 분해보다는 물리적인 방법으로 비교적 강하게 처리한 것 세가지 경우에서 토양에서 추출한 유류를 분석한 결과 normal alkane이 서서히 상당량 분해되는 양상을 보여주었다. 토양내 Pb, Zn, Cd, Ni를 분석한 결과 부산 시료의 경우 두 층(B2, B3)모두 Cd은 검출한계 이하로, Ni의 경우 극소량의 함량을 보여주었다. Zn의 경우 B2는 28～29ug/g, B3는 12～14ug/g으로 세가지 경우 별 차이 없는 양상을 보여 주었다. 하지만, Pb의 경우 B2에서는 그 함량이 유류의 normal alkane의 분해와 함께 서서히 증가하는 경향을 확연히 보여주었으며, B3의 경우도 B2와 유사한 변화 양상을 보여주었다. 제주도 토양의 경우 Pb는 검출되지 않았고, Zn은 소량 검출되었다. Ba, Ni 함량은 normal alkane 분해에 따라 다소 증가하였다. 따라서, 본 예비실험을 통하여 유류오염 토양에서 유류의 분해와 일부 무기이온사이에는 관련성을 갖고 있으며, 이는 유류 분해정도를 파악하는 지시자로써 특정 무기 오염물질을 이용할 수 있을 가능성이 있으므로 좀더 이들 관계성에 대한 연구가 진행될 필요성이 있다고 판단된다.고 과학적으로 분석할 수 있는 방법이 될 수 있을 것으로 기대된다. 의미를 되새기는 것으로 짧은 연구를 시작하겠다. 등은 활성 값이 70% 이상으로 퇴적물 독성이 상대적으로 낮았다. 이중나선 DNA 함량은 28.4 % - 49%로 대조군에 비해서 감소가 크다. 대부분의 정점이 대조군의 30% 내외로 정점 간의 차이는 크지는 않다. 그러나 다른 측정자료와 같이 정점 22에서 18%로 최소치를 나타내고, 정점 2, 12에서 20% 내외의 값을 보인다. 종합적으로 볼 때 오염물질의 유입이 크고, 광양제철 인근 정점 들이 모두 다른 정점에 비해서 낮아서, 퇴적물 독성이 높은 정점으로 조사되었다.hiwo의 광합성 능력은 낮은 농도들에서는 대조구와 유사하였으나, 5 $\mu\textrm{g}$/l의 높은 농도에서는 초기에 매우 낮은 광합성 능력을 보이다가 시간이 경과하면서 대조군보다 더 높은 경향을 나타냈다. 이러한 결과는 식물플랑크톤이 benso[a]pyrene의 낮은 농도에서 노출될 때는 이 물질을 탄소원으로 사용할 가능성이 있음을 시사한다. 본 연구의 결과들은 연안해역에 benso[a]pyrene과 같은 지속성 유기오염물질이 유입되었을 때 내정여부에 따라 식물플랑크톤 군집내 종 천이와 일차생산력에 크게 영향을 미칠 수 있음을 시사한다.TEX>5.2개)였으며, 등급별 회수율은 각각 GI(8.5%), GII(13.4%), GIII(43.9%), GIV(34.2%)로 나타났다.ments of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japan

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.81-88
• /
• 2009

This study has shown the tendency to enhance Sand Flux, a device of separating screening the foreign matter, for the recycling of construction waste possible to improve the quality of wet type production system meaningfully as part of research. As a result of experiment on the basic material properties, this study had a tendency to improve the quality and performance significantly in case of absolute surface dried density, 0.08mm sieve throughput, volume of clay lumps, and content of organic foreign matter. In addition, as a result of examining the quality characteristics of mortar, this study has shown the tendency that the flow and compressive strength more increased than the mortar using RS-II by utilizing RS-VI recycled sand produced finally through the device Sand Flux. As for the shrinkage properties, this study has shown the character the generation rate of crack of mortar using RS-IV recycled sand produced finally through the device Sand Flux.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.659-665
• /
• 2008

This study is about zeolite synthesis from the sewage sludge incinerator fly ash of "S" sewage treatment center located in Seoul. For this purpose, the properties of raw fly ash as starting material, the hydrothermal conditions for zeolite synthesis and the environmental applicabilities of synthesized zeolites were examined. Fly ash from sewage sludge incinerator has large quantities of SiO$_2$ and Al$_2$O$_3$ and their contents are 42.8 wt.% and 21.2 wt.% respectively. So fly ash is considered to be possible starting material for zeolite synthesis. The results from leaching test of fly ash showed that the concentration of hazardous metals were very low as compared with the Korea leaching standard of the Waste Management Law. But the concentration from total recoverable test of fly ash were higher than the fertilizer standard of Fertilizer Management Law. Major zeolite products synthesized by hydrothermal reaction are analcime in teflon vessel and zeolite P1 in borosilicate flask. Optimum conditions for the synthesis of analcime were 1 N of NaOH concentration, 16 hour of reaction time and 135$^{\circ}C$ of reaction temperature. For the zeolite P1 formation, the proper conditions were demonstrated to be 5 N of NaOH concentration, 16 hour reaction time and 130$^{\circ}C$ of reaction temperature in this study. Hazardous metal contents in the analcime product are similar with those in raw fly ash. In case of the zeolite P1, the contents are reduced to nearly a half. Raw fly ash and the analcime product showed NH$_4{^+}$ ion exchange capacity of 0$\sim$1.0 mg of NH$_4{^+}$g$^{-1}$ and 3.0$\sim$7.4 mg of NH$_4{^+}$g$^{-1}$, respectively. However, the zeolite P1 product reached exchange capacity to 14.6$\sim$17.8 mg of NH$_4{^+}$g$^{-1}$. This values are in the range of those of natural clinoptilolite and phillipsite. From this point of view, zeolite synthesis from sewage treatment sludge incinerator fly ash is a good alternative for solid waste recycling.

• Journal of Forest and Environmental Science
• /
• v.17 no.1
• /
• pp.29-36
• /
• 2001

Compared to other industries, pulp and paper industry use a lot of water. As a result, a large amount of the waste water is discharged in the pulp and paper industry. This study was investigated to prevent the environmental pollution terribly faced with our society nowadays. In the waste water of pulp and paper, there are so many things in the waste water, like fiber, filler, and other organic solvent etc. so we must remove them from our environment. This study was investigated to experiment on test of impressed filtration with the kind and quantity of coagulant and the variance of pressure. In this study, we used feds, alums. $CaCl_2$, polymer as a coagulant and these pressure was 49, 98, 147, 196kpa. According to this study, we measured the speed of filtration and turbidity, measuring filtrated water. According to the values, we know the fact that as the consistency of coagulant and pressure were high, the filtration was good.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.4
• /
• pp.111-116
• /
• 2001

As part of the recycling methods, residual food through the anaerobic fermentation process was decomposed into methane gas and fermentation liquid. The research was conducted to measure the effect of application of fermentation liquid on chemical properties of soil and plant growth according to application rate and separate manure at the base of nitrogen in fermentation liquid. The fermentation liquid contained 0.52% nitrogen was applied in treatments by standard fertilizer. The treatments were composed of the control only with chemical fertilizer and N-50, N-100-4, N-100-8 were each of applied with 50, 100(6 times), 100(3 times)% of fermentation liquid contrast to standard fertilizer. Properties of fermentation liquid was high EC because of waster soluble organic compounds as well as much of salts and also contained a lot of suspended solid. The changes of soil chemical properties little occurred in before and after of experiment but EC and content of ex. Ca in soil were increased. Fresh weigh in treatments applied with fermentation is high than that of control but the difference between treatments little showed. The above result means if fermentation liquid be used instead of chemical fertilizer the volume of used fermentation liquid will be reduced by 50% of present standard fertilizer.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.40-48
• /
• 2010

This study was carried out to investigate the physicochemical and functional properties of Yacon (Polymnia Sonchifolia) powder. The proximate composition of Yacon powder as a dry matter basis was 3.53% moisture content, 1.13% crude protein, 0.40% crude fat, 0.79% crude ash, 1.63% dietary fiber and 92.52% carbohydrate. The major free sugars were identified as fructose and glucose. Analysing total amino acids, 18 kinds of components were isolated from Yacon powder. The essential amino acid contained in Yacon powder accounted for 28.40% of total amino acid, while the non-essential amino acid accounted for 73.61%. Analysing total fatty acids, only 2 kinds - palmitic acid and lauric acid - were detected. Oxalic acid was the major organic acid. The contents of vitamin A, vitamin C and vitamin E were 0.057 mg%, 0.670 mg% and 0.001 mg%, respectively. The mineral contents of Yacon powder were in the order of Zn

• Resources Recycling
• /
• v.18 no.2
• /
• pp.16-29
• /
• 2009

This paper describes characteristics of pollutants in wastewater from the pulp and paper industry and biological technologies for the wastewater treatment. The wastewater from the pulp and paper industry contains high concentrations of biochemical oxygen demand (BOD) and chemical oxygen demand (COD) and shows high toxicity and strong black-brown color. In particular, organic chlorinated compounds such as dioxins and furans may be formed by the chlorination of lignin in wood chips. Thus the pulp and paper industry is recently trending toward total chlorine-free (TCF) bleaching processes. All biological technologies for pulp and paper wastewater treatment are based on the contact between wastewater and bacteria, which feed on organic materials in the wastewater, thus they reduce BOD concentration in it. Both aerobic and anaerobic treatments were found to be effective for the wastewater treatment. Furthermore, advanced technologies such as fungal application and combined biological-filtration process have been also introduced to the wastewater treatment field. These technologies would be useful for water recycling to reduce water consumption throughout pulp and paper making process.