• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.535-536
• /
• 2013

본 연구에서는 DC/RF co-sputtering공법을 통해 제작한 In-Mo-O 투명 Mo doping 농도 및 열처리 온도에 따른 전기적, 광학적, 구조적 특성을 분석하고, 최적화된 In-Mo-O 투명전극을 유기태양전지(OPVs)와 유기발광다이오드(OLED)에 적용하여 그 가능성을 평가하였다. Mo doping 농도는 co-sputtering 공정 중 MoO3에 인가되는 radio-frequency (RF) power를 변화시켜 조절되었으며, 투명전극의 광학적 특성 및 전기적 특성 향상을 위해 성막 공정 후 급속 열처리 공정을 온도 별로 진행하였다. In-Mo-O 투명 전극은 Mo 도핑 농도에 영향을 받음을 확인할 수 있었고, 최적화된 Mo doping 파워에서 성막한 In-Mo-O 박막은 급속 열처리 공정 후 면저항 24.57 Ohm/square, 투과도 81.57% (400~1,200 nm wavelength)를 나타내었다. Bulk hetero-junction 기반의 고효율 유기태양전지와 유기발광다이오드 적용하기 위해 본 연구에서 제작된 IMO 투명전극의 구조적 특성, 결정성 및 표면특성은 x-ray diffraction (XRD), atomic force microscopy(AFM), field effect scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HRTEM) 분석을 통해 진행하였다. In-Mo-O 투명 전극상에 제작된 OLEDs와 OPV는 reference ITO 전극에 제작된 OLEDs/OPV와 비교할 때 유사하거나 향상된 특성을 나타내었으며 이는 In-Mo-O 박막이 OLED/OPV용 투명 전극으로 적용이 가능함을 말해준다.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.213-217
• /
• 2005

The polymer light emitting diodes (PLED) with ITO/PEDOT:PSS/MEH-PPV/Al structure were prepared on ITO(indium tin oxide)/Glass substrates using PEDOT:PSS[poly(3,4-ethylenedioxythiophene):poly(styrene sulfolnate)] as the hole transport material and MEH-PPV[poly(2-methoxy-5-(2-ethyhexoxy)-1,4phenylenvinylene)] as emission material layer. The dependences on the surface roughnees and friction coefficient between film layers were investigated as a function of the MEH-PPV concentrations$(0.1\;wt\%\~0.9\;wt\%)$. The RMS values decreased from 1.72 nm to 1.00 nm as the concentration of MEH-PPV increased from $0.1\;wt\%\;to\;0.9\;wt\%$, indicating improvement of surface roughness. In addition, friction coefficients decreased from 0.048 to 0.035, which means the deteriorating of the adhesion condition. The PLED sample with $0.5\;wt\%$ of MEH-PPV showed the maximum luminance of $409\;cd/m^2$.

• The Monthly Technology and Standards
• /
• s.79
• /
• pp.9-14
• /
• 2008

• 전기의세계
• /
• v.54 no.10
• /
• pp.32-39
• /
• 2005

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.1
• /
• pp.11-15
• /
• 2016

The organic light emitting diodes (OLEDs) have been studied as large flexible displays, light source and hard wares of internet of things. However, OLEDs show some drawbacks in terms of external environments due to the low work function of the metals and the reactive organic materials. In particular, the operation functions of the OLEDs tend to deteriorate rapidly by exposing the oxygen and moisture. So as to prevent it, domestic and overseas studies underway in various method such as ALD, PVD, CVD. But it has complex process and high cost. Therefore In order to protect devices from the external environments, it is important to develop the passivation thin films of low-cost and simple process which can prevent the devices from the penetration of the oxygen and moistures. In this study, to improve the reliability, passivation thin films were coated onto the green OLEDs by spin coating method and investigated the changes of the optical properties of the prepared devices at various doping concentrations of sodium alginate (SA). The passivation solutions were synthesized by using polyvinyl alcohol (PVA) host material with a dopant of SA which were added with the amounts of 10, 20 and 40 wt% into the PVA. As a result, the best barrier properties of the OLEDs were obtained for the samples with 40 wt% SA. Finally, the passivation films can be optimized by using the mixture solution of PVA and SA materials.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.254-258
• /
• 2009

We herein report on polymer phosphorescent light-emitting devices doped with iridium complex. The emitting layer of poly(N-vinylcabazole) and tris(2-phenylpyridine)iridium was fabricated by low speed dip-coating of 10, $20{\mu}m$/s. The devices showed stable current increasing leakage current at turn-on voltage. Compared to conventional spin-coating based organic light-emitting devices, the driving voltage by dip-coating observed lower values of 5.8 and 6.7 V at the luminance of 100 Cd/$cm^2$.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.4
• /
• pp.35-38
• /
• 2003

Polymer light emitting diode (PLED) with an ITO/MEH-PPV/Al structure were prepared by spin coating method on the ITO (indium tin oxide)/glass substrates, using poly(2-methoxy-5-(2-ethylhexoxy)-1,4-phenylenevinylene (MEH-PPV) as the light emitting material. The dependence of heat treatment on the electrical and optical properties for the prepared PLED samples were investigated. The luminance decreased greatly from 630 cd/$\m^2$ to 280 cd/$\m^2$ at 10V input voltage as the heating temperature increased from $65^{\circ}C$ to $170^{\circ}C$. In addition, the luminance efficiency was found to be about 2 lm/W for the sample heat treated at $65^{\circ}C$. These results may be related to the interface roughness and/or the formation of an insulation layer, which is caused by the reaction between electrode and MEH-PPV organic luminescent film layer.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.244-250
• /
• 2013

We investigated green phosphorescent organic light-emitting diodes (PHOLEDs) with charge control layer (CCL) to produce high efficiency. The CCL and host material which was 4,4,N,N'-dicarbazolebiphenyl (CBP) of bipolar property can control the carrier movement in emitting layer (EML). The performance improvement by the insertion of CCL was realized to the well confined exciton and the reduced triplet exciton quenching effect in EML. Five types of devices (Device A, B, C, D, and E) were fabricated following the thickness of CCL within EML. The properties of device D using optimized thickness of CCL showed external quantum efficiency of 16.22% and luminous efficiency of 55.76 cd/A, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.271-271
• /
• 2015

유기 전자 소자는 높은 유연성을 가지고 있어 차세대 전자소자로 주목을 받고 있다. 이러한 유기 전자소자에 있어서 투명전극은 핵심소재 중의 하나인데, 유연성을 위하여 유연한 투명전극의 개발이 필수적으로 요구되고 있다. 본 연구에서는 마이크로/나노 금속 배선을 활용한 저저항/고투과의 투명전극을 제작하였고, 이러한 금속 배선은 기판에 함몰되어 있음에 따라 높은 평탄도 및 유연성을 가지고 있다. 본 전극은 기존의 ITO 대비 높은 투명전극으로서의 성능을 보이고, 이를 활용하여 유기 발광 다이오드를 제작한 결과 높은 발광 특성을 보임을 확인할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.499-499
• /
• 2013

유기 발광 소자는 낮은 구동전압, 낮은 소비전력, 높은 명암비, 넓은 시야각 및 빠른 응답속도의 장점을 가지고 있기 때문에 전색 디스플레이에서 각광을 받고 있다. 고효율의 청색 유기 발광 소자를 제작하기 위해서 다양한 구조를 제작하고 있지만, 적색 및 녹색 유기 발광 소자에 비해 낮은 효율, 색 순도의 저하 및 짧은 수명으로 인한 문제점을 갖고 있기 때문에 이를 해결하기 위한 연구가 필요하다. 본 연구에서는 발광층내에 호스트 물질로 1.3-Bis(carbazol-9-yl) benzene (mCP)와 2-t-butyl-9,10-di-2-naphthylanthracene (TBADN)을 혼합하였고, 형광 도펀트인 4,40-Bis[4-(diphenylamino)styryl]biphenyl (BDAVBi) 또는 인광 도펀트인 bis(3,5-difluoro-2-(2-pyridyl) phenyl-(2-carboxypyridyl)iridium III (FIrpic)을 혼합한 발광층을 사용한 유기 발광 소자를 제작하여 전기적인 특성과 발광 효율을 관찰하였다. 유기 발광 소자의 정공 수송층 N,N,'-bis-(1-naphthyl)-N,N'-diphenyl1-1'-biphenyl-4,4'-diamine (NPB)와 정공 저지층 3-Benzidino-6-(4-chlorophenyl) pyridazine (BCP) 사이에 호스트 mCP와 도펀트 TBADN：BDAVBi를 혼합한 발광층의 혼합비율을 최적화 할 때 구동전압이 낮고, 발광효율이 증가됨을 확인하였다. 호스트 mCP에 도펀트를 혼합한 발광층에서는 호스트로 mCP 또는 TBADN만 사용하였을 때보다 전계발광 스펙트럼의 최대치가 청색 영역에서 나타남을 확인하였다. Commission Internationale de l'Eclairage (CIE) 측정을 통해, 호스트 mCP와 도펀트 TBADN : BDAVBi의 최적화된 혼합비에서 전압의 변동에 따른 CIE 값이 매우 안정적임을 확인하였다.