• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2008

To improve the performance of the bent axis type axial piston pump driven by the tapered piston, it is necessary to know the driving characteristics and mechanism of the tapered piston and the cylinder block. Since each piston not only rotates on its axis and reciprocates in the cylinder bore, but also revolves around the axis of the driving shaft, it is difficult to analyze the driving mechanism theoretically. The theoretical mechanism far the bent axis type axial piston pump is studied by using the geometrical method. The driving range of the tapered piston is determined by theoretical equations. The results show that the cylinder block is driven by one tapered piston in a limited range and the core parameters such as driving factor of the piston and the ahead delay angle influenced performance of the bent axis type axial piston pump.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.50-54
• /
• 2011

공극률, 슬릿 수 및 두께가 다양한 오리피스 구조물을 대상으로 개수로 수리실험을 진행하여 유공벽의 벽두께에 따른 에너지 손실계수의 변화 및 메커니즘을 연구하였다. 오리피스의 개수로 수리실험을 수행하였으며 다양한 유속조건에서 오리피스의 벽두께에 대한 에너지 손실계수를 측정한 뒤 결과를 권 등(2010)의 관수로 실험결과와 비교하였다. 실험결과 전체적으로 유속에 따라 에너지 손실은 변화하였으며 유속이 감소할수록 에너지 손실은 크게 증가함을 보였다. 유속이 작은 층류구간에서 유속이 감소할수록 에너지 손실은 증가하는 반비례 관계를 보였고 에너지 손실량은 관수로 실험결과와 서로 비슷하였다. 그러나 유속이 강한 난류 구간에서는 에너지 손실이 유속과 무관하게 일정한 관수로 결과와는 달리 유속에 따라 변화하였다. 또한 유속이 약한 흐름에서는 오리피스의 두께 및 슬릿 수에 따라 에너지 손실은 각각 다르게 측정되었지만 유속이 강한 흐름에서는 벽두께 변화와 상관없이 에너지 손실은 거의 비슷하였다. 이 결과로부터 개수로 오리피스의 경우 유속이 강한 구간에서는 오리피스의 벽두께 효과 보다 상 하류 수위차로 발생하는 개수로 효과가 더 큰 영향을 주는 것으로 확인되었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.343-351
• /
• 2014

The reflection and transmission coefficients of waves due to perforated wall are mainly determined by both the porosity and wall thickness of the perforated wall and the period and nonlinearity of incident waves. Among them the wall thickness is very important because it affects the head loss coefficient and the inertia length of the wall. However, by employing the head loss coefficient derived for sharp crested orifice, the previous researches have neglected, or incorrectly considered the effect of wall thickness on the head loss coefficient. Even though it is considered, the effect of the inertia length is neglected in some empirical formulae. Thus, the effect of wall thickness on the reflection and transmission coefficients of waves is not properly considered. In this study comprehensive experiments are conducted for the perforated walls with various thicknesses, and the results are compared with those predicted by the empirical formulae. As a result it is found that the existing formulae can not properly consider the effect of wall thickness, and it is confirmed that a new formula which can correctly consider the effect of wall thickness on the head loss coefficient is necessary.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.267-274
• /
• 2015

In this paper, an experimental evaluation of shear strength of wide beam is presented. By the experiment in paper, shear strength depending on parameter of shear reinforcement by GFRP plate on wide beam is investigated. Specimens are 7 of reinforced by GFRP plate with openings. The shear reinforcement is manufactured into plate shape with openings to ensure perfect integration with concrete. The test was performed on 7 specimens. The parameters are including number of shear reinforcement by GFRP plates and center-to-center spacing between vertical strip. We analysed the crack, failure mode, strain, shear strength of specimens. A calculation of the shear strength of reinforced wide beam with GFRP plate based on ACI 318-11. The result of the experiment shows that the GFRP plate is works successfully as shear reinforcement in the wide beam.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.382-389
• /
• 1995

This study intended to investigate the sedimentation rates of core sediments of the western part of the East Sea using Accelerator Mass Spectrometer (AMS) C-age on the planktonic foraminifera or acid-ex-tracted residue, base-soluble and base-extracted residue fractions. On the basis of the depth-age correlations, the sedimentation rates during the late Holocene period of Cores HP-10, HP-3, 94-9 and 92-3 were 30 cm/kyr, 10 cm/kyr, 11 cm/kyr and 112 cm/kyr, respectively. The sedimentation rates of the westem part of the East Sea, however, seems to be ranged from 11 cm/kyr to 30 cm/kyr, because the rates of the only two cores (Cores HP-10 and 94-9) which were dated at more than three depths are considered to be more reliable. The rates in each core sediment showed good linear relationship with the sample depth, suggesting that the sea-level rise had been finished nearly during the early Holocene period and the general depositional environments had been lasted rather constant during the late Holocene period.

• Journal of Drive and Control
• /
• v.8 no.1
• /
• pp.33-39
• /
• 2011

풍력산업은 발전사업과 풍력터빈 제조산업으로 나뉜다. 세계의 풍력터빈의 설치량은 1996년을 기준으로 해서 매년 평균 28.6%의 성장률을 보여왔다[1]. 2008년 이후 그 성장세가 다소 꺾이기는 했지만, 그린에너지에 대한 세계적인 관심과 욕구, 화석연료 의존에서의 탈피 등의 이유로 계속적인 성장이 예상되고 있다. 특히 재생에너지 분야에서는 가장 시장 경쟁력을 확보할 수 있기 때문에 예측의 실현 가능성이 높다 하겠다. 풍력터빈과 그 부품 산업 역시 유럽이 주도적으로 끌고 나가고 있으며, 아시아와 북미의 시장이 대두됨에 따라서 지역의 풍력산업이 활발하게 발전하고 있다. 국내는 발전사업보다는 제조산업에 1차적인 관심이 있으며, 이를 바탕으로 국산화 모델의 개발 및 상용화에 정부와 민간이 힘을 쏟고 있다. 제품의 개발과 상용화는 시장을 바탕으로 이루어지는데, 불행하게도 국내의 풍력발전 시장은 매우 좁아서 국내 풍력터빈 제조사의 성장에 어려운 점이 있다. 하지만, 국내의 중공업기반과 산업수준을 적극 활용하여 터빈 완제품 및 부품산업의 발전을 위하여 국가와 민간차원에서의 노력이 가중되고 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1379-1385
• /
• 2014

Even the rough prediction of the product test time before the lifetime test of mechanical component begins would be of use in estimating cost and deciding how to keep up with the test. The reliability predictions of mechanical components are difficult because failure or degradation mechanisms are complicated, and few plausible databases are available for lifetime prediction. Therefore, this study conducted lifetime predictions of elastomeric U seals that were respectively installed in a hydraulic actuator and a pneumatic actuator using lifetime models and a field database based on failure physics and an actual test database obtained from the NSWC handbook. To validate the results, the predicted failure rates were compared with the actual lifetime test results acquired in the lab durability tests. Finally, this study discussed an engineering procedure to determine the coefficients in the failure rate models and analyzed the sensitivity of each influential parameter on the seal lifetime.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.187-192
• /
• 2021

This study was conducted to compare the quality of baby leaves grown under several temperature conditions and the storage properties of MA storage for romaine lettuce. It was grown for 5 weeks under an artificial light source (200 µmol·m^-2·s^-1) in a chamber at 21℃, 28℃, and 35℃. The growth and quality of red romaine lettuce that grown in different temperatures were investigated at the end of cultivation, and the oxygen, carbon dioxide, and ethylene concentrations in the 20,000 cc OTR film and perforated film packed with lettuces were measured for 36 and 12 days, respectively. The red romaine lettuce baby leaf was examined for color, chlorophyll, and visual quality at the end of storage. The maximum quantum yield of baby leaf grown in different temperatures at 7days before the harvest was higher at 21℃ and 28℃ growth temperature treatments. On harvest day, the leaf length measured was longest at 28℃, and the leaf width was wider at 21℃ and 28℃, and the number of leaves was similar to 5-6 at all cultivation temperatures. Leaf weight, root weight, and dry weight were found to be higher at 21℃, and tended to decrease as the cultivation temperature increased. The concentration of ethylene in the film of the MA storage treatments was maintained at 1~2 µL·L^-1 until the end of storage in all treatments regardless of the cultivation temperature. Oxygen concentration in the MA treatment used 20,000 OTR film was maintained at around 19.5%, and carbon dioxide concentration around 1% that was satisfied the CA conditions. Both Hunter a^* and b^* values were generally higher in the MA storage treatment at the end of storage day. The chlorophyll content was decreased as the cultivation temperature increased, and was lower in the MA storage treatment than in the perforated film treatment. Visual quality was 3 points or higher in the MA storage treatment at 21℃ growth treatment, and it was maintained marketability. As the above results, the growth of baby leaves of romaine lettuce was the best at 21℃ treatment, and the lower the cultivation temperature, the longer the shelf life. And it was possible to extend the shelf life by 3 times by showing excellent visual quality at the MA storage treatment that satisfies the carbon dioxide concentration of CA condition until the end of storage day.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.2
• /
• pp.83-87
• /
• 2017

This study was conducted to determine types of oxygen transmission rate (OTR) films suitable for modified atmosphere (MA) storage treatment of strawberries (cv. 'Maehyang') for export and examination related changes in quality of strawberries during simulated shipping distribution conditions ($2^{\circ}C$ for $10days{\sim}8^{\circ}C$ for 11 days). Strawberries were packed by 1,300, 10,000, 20,000, and $30,000cc/m^2{\cdot}day{\cdot}atm$ OTR films for MA storage treatment and perforated film as the control for MAP. Fresh weight loss rate was less than 0.5% in OTR films except for the perforated film. Carbon dioxide and oxygen content in packages prevailed in permissible range for strawberries under recommended CA/MA conditions (i.e., $CO_2$: 15~20%, $O_2$: 5~10%) at 10,000 cc, 20,000 cc, and 30,000 cc OTR films. Ethylene content in OTR films did not reveal significant differences during storage. The 1,300 cc OTR film revealed highest off-flavor and lowest fungal incidence rate by sensory evaluation. The firmness, soluble solids, and visual quality were preserved the highest at 10,000 cc OTR film. In conclusion, 10,000 cc OTR film preserved the highest quality and extended shelf-life by 13 days if compared with conventional distribution conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.651-659
• /
• 2020

The objective of this study is to provide high-quality medical service, by understanding the characteristics and death risk factors of patients at V long-term care hospital, that has established and operated the cooperative treatment system in connection with a public institution, the S veterans hospital. A follow-up survey targeting a total of 850 discharged patients was conducted for the year 2017. Average age of patients was 79.2 years, with 86.4% belonging to the 70 years or over group. The men of national merit were 75.4%, which was more than three times higher than general patients. Hospitalization for 180 days or more was 46.4%, which was higher than general long-term care hospitals (37%). The major death risk factors were age and the number of hospitalized days. Our data indicate that transfer to S veterans hospital results in providing quicker treatment and higher effectiveness of the numerous recovery therapies. We therefore propose that the cooperative treatment system should be expansively operated to increase the quality of happy life, by alleviating the health of patients with chronic diseases in a long-term care hospital.