• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.77-77
• /
• 2008

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.99-99
• /
• 2009

차세대 대체에너지로서 유기태양전지는 저비용, flexible한 장점이 있다. 그러나 에너지 효율이 상대적으로 낮아 고효율 유기태양전지 개발이 필요하다. 이 문제를 개선하기위해 본 실험에서는 전기화학적인 방법으로 ZnO 나노구조체 (nanowire, film)를 ITO위에 전착하였다. ZnO 나노구조체는 Poly(3-hexylthiophene)(P3HT):[6,6]-Phnyl-C61-butyric acid methyl ester (PCBM)에서 엑시톤된 전자와 홀의 charge collector와 electron path way로서 사용되었다. 유/무기 하이브리드 태양전지의 구조는 Ag/P3HT:PCBM/(A)/ITO로 사용하였으며 (A)는 (1) ZnO nanowire/ZnO film (2)ZnO nanowire (3)ZnO film으로, 각각의 효율을 측정하였다. 생성된 ZnO 나노구조를 FE-SEM, XRD, TEM, UV/vis로 분석하였고 AM1.5G SUN을 기준으로 하여 Solar simulator로 효율을 측정하였다. 측정결과 Jsc값의 증가를 효율이 향상됨을 알 수 있었다.

• Electrical & Electronic Materials
• /
• v.29 no.8
• /
• pp.11-21
• /
• 2016

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.299-301
• /
• 2007

An organic-inorganic hybrid solar cell fibers with characteristics such as formability, low-cost and tailorability was developed by deposition of C60 and CuPc on fiber surface. In spite of some variation according to the temperature of ITO deposition, the maximum open circuit voltage of 0.39V was attained at $150^{\circ}C$(1000end). The resulting solar cell showed the performances Isc=0.482, Voc=0.320, FF=0.285 ${\eta}_{e}=0.044$% which are comparable to one of other types of solar cells in literature.

• Journal of Adhesion and Interface
• /
• v.20 no.4
• /
• pp.146-154
• /
• 2019

In this study, alkoxysilane-functionalized amphiphilic polymer (AFAP), which have hydrophilic segment and hydrophobic segment functionalized by alkoxysilane group at the same backbone, was synthesized and used as a dispersant and control agent for reaction rate in the preparation of colloidally stable organic-inorganic (O-I) hybrid sols. After reaction with fluorosilane compounds, fluorinated O-I hybrid sols were prepared and coated onto glass substrate to form hydrophobic O-I hybrid coating films through low-temperature curing process. Surface hardness and hydrophobicity of cured coating films were varied with type of solvent and composition of AFAP and fluorinated alkoxysilane compounds. At appropriate solvent and composition of fluorinated alkoxysilane compounds, O-I hybrid coating film having high transparency and surface hardness could be prepared, which could be applicable to cover window of solar cell and displays.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.487.1-487.1
• /
• 2014

현재 전 세계 태양광 시장의 주류를 이루는 단결정 실리콘 태양전지의 효율적 한계를 뛰어넘기 위하여 여러 가지 기술적 구조적 시도들이 이루어지고 있다. 그 중 기존의 피라미드 형태의 텍스쳐링 표면 대신 나노와이어 형상을 가지는 태양전지 개발이 주목을 받고 있다. 실리콘 웨이퍼 표면에 나노와이어가 수직 배열되어 있거나 텍스쳐링 표면에 나노와이어 형상이 있을 경우 SiNx가 증착된 피라미드 텍스쳐링 표면보다 반사도가 월등히 낮아져 light trapping을 기대할 수 있어 태양전지 개발에 응용하기 위한 나노와이어 형상 최적화에 본 연구의 목적이 있다. 실리콘 나노와이어 합성법에는 여러가지 방법들이 있으나 본 연구에서는 비교적 짧은 시간과 상온에서 공정이 이루어지는 무전해 식각법을 이용하여 실리콘 나노와이어를 합성하였다. 무전해 식각법은 은 이온과 실리콘 사이에서 일어나는 산화-환원 반응이 나노와이어 합성의 주요 기전이기 때문에 균일한 나노와이어를 형성하기 위하여 균일한 은 박막 형성과 적절한 반응시간이 요구된다. 본 연구에서는 반응시간을 조절하여 나노와이어의 길이 변화와 반사도의 변화를 FE-SEM과 UV-Vis-NIR spectroscopy를 통하여 관찰하였고 그 결과 나노와이어가 실리콘 웨이퍼 표면에 수직 배열되어 있는 형태와 텍스쳐링 표면에 나노와이어 형상이 있는 경우 SiNx가 증착된 피라미드 텍스쳐링 표면에 비해 월등히 향상된 반사율을 얻을 수 있었다.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.918-925
• /
• 2021

The perovskite solar cell is a next-generation solar cell that replaces the existing silicon solar cell. It is a solar cell device using an organic-inorganic hybrid material having a perovskite structure as a photoactive layer. It has advantages for the process and has shown rapid efficiency improvement over the past decade. In the process of commercialization of such perovskite solar cells, research and development for a large-area coating method should be carried out. As one of the large-area perovskite solar cell large-area coating methods, the slot-die coating method was studied. By using a meniscus to pass over the substrate and coating the solution, the 3D printer was equipped with a meniscus so that it could be coated. Variables that act during coating include bed temperature, coating speed, N₂ blowing interval, N₂ blowing height, N₂ blowing intensity, etc. By controlling these, the perovskite absorption layer was manufactured and the coating conditions for manufacturing large-area devices were optimized.

• The Journal of the Korea Contents Association
• /
• v.22 no.7
• /
• pp.55-62
• /
• 2022

The perovskite solar cell is an active part of research in renewable energy fields such as solar energy, wind, hydroelectric power, marine energy, bioenergy, and hydrogen energy to replace fossil fuels such as oil, coal, and natural gas, which will gradually disappear as power demand increases due to the increase in use of the Internet of Things and Virtual environments due to the 4th industrial revolution. The perovskite solar cell is a solar cell device using an organic-inorganic hybrid material having a perovskite structure, and has advantages of replacing existing silicon solar cells with high efficiency, low cost solutions, and low temperature processes. In order to optimize the light absorption layer thin film predicted by the existing empirical method, reliability must be verified through device characteristics evaluation. However, since it costs a lot to evaluate the characteristics of the light-absorbing layer thin film device, the number of tests is limited. In order to solve this problem, the development and applicability of a clear and valid model using machine learning or artificial intelligence model as an auxiliary means for optimizing the light absorption layer thin film are considered infinite. In this study, to estimate the light absorption layer thin-film optimization of perovskite solar cells, the regression models of the support vector machine's linear kernel, R.B.F kernel, polynomial kernel, and sigmoid kernel were compared to verify the accuracy difference for each kernel function.

• New Physics: Sae Mulli
• /
• v.68 no.11
• /
• pp.1208-1214
• /
• 2018

The one-step spin coating method is reported as an excellent thin film process because it can be easily used to fabricate high-quality methyl-ammonium lead tri-iodide ($MAPbI_3$) perovskite layers. One of the important things in the one-step spin coating method towards obtaining high-quality $MAPbI_3$ layers is the anti-solvent (AS) engineering, which consists of an one-step deposition of the $MAPbI_3$ film and dripping of the AS. The properties of the $MAPbI_3$ layer were found to be strongly influenced by the amount, dispensing speed, and spraying time of the AS solution. The $MAPbI_3$ solution was prepared by dissolving lead iodide and methyl-ammonium iodide in N,N-dimethylformamide and adding N,N-dimethyl sulfoxide. Diethyl ether (DE) was used for the AS solution. The results indicate that a $MAPbI_3$ layer appropriately sprayed with DE is beneficial for improving film quality and device efficiency because nucleation of $MAPbI_3$ layer is affected by the characteristics of DE, which affect the film's crystallinity, density, and surface morphology. The $MAPbI_3$ layer, which was optimized by using 0.7 mL of DE, a 3.03 mL/sec dispensing speed, and a 7 second time to spray after spinning showed the best efficiency of 13.74%, which was reproducible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.646-651
• /
• 2018

This paper reports that the electronic properties at a $P3HT/TiO_2$ interface associated with exciton dissociation and transport can be tailored by the insertion of a graphene quantum dot (GQD) layer. For donor/acceptor interface modification in an $ITO/TiO_2/P3HT/Al$ photovoltaic (PV) device, a continuous GQD film was prepared by a sonication treatment in solution that simplifies the conventional processes, including laser fragmentation and hydrothermal treatment, which limits a variety of component layers and involves low cost processing. The high conductivity and favorable energy alignment for exciton dissociation of the GQD layer increased the fill factor and short circuit current. The origin of the improved parameters is discussed in terms of the broad light absorption and enhanced interfacial carrier transport.