• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.875-888
• /
• 2013

The researches have recently progressed toward the use of the superelastic shape memory alloys (SMAs) to develop new smart control systems that reduce permanent deformation occurring due to severe earthquake events and that automatically recover original configuration. The superelastic SMA materials are unique metallic alloys that can return to undeformed shape without additional heat treatments only after the removal of applied loads. Once the superelastic SMA materials are thus installed at the place where large deformations are likely to intensively occur, the structural system can make the best use of recentering capabilities. Therefore, this study is intended to propose new buckling-restrained braced frames (BRBFs) with superelastic SMA bracing systems. In order to verify the performance of such bracing systems, 6-story braced frame buildings were designed in accordance with the current design specifications and then nonlinear dynamic analyses were performed at 2D frame model by using seismic hazard ground motions. Based on the analysis results, BRBFs with innovative SMA bracing systems are compared to those with conventional steel bracing systems in terms of peak and residual inter-story drifts. Finally, the analysis results show that new SMA bracing systems are very effective to reduce the residual inter-story drifts.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.247-252
• /
• 2014

Despite the facts that navigation technology and educational programs were developed, and that maritime law has been enforced strictly, the number of maritime accidents has not dropped significantly. Accident prevention is emphasized because of the extreme life, property, and environmental losses that accompany maritime accidents. Even though there are a variety of preventive activities, their performance is not satisfactory. In order to promote preventive activities and to organize safety management, a Preventive Index of Ship Accident(PISA) and a Preventive Level of Ship Accident(PLSA) which are abstracted from the statistical data of ship accidents (2009~2013) are proposed. The survey module by which these variables can be calculated is composed of preventive domains such as education, engineering, enforcement and information, and is applied for the preventive indexes measurement of cargo, passenger, tanker, tugboat and fishery ships. We compared and analyzed measured result with statistical accident rates and cases to confirm the index utilities. It was found that there is some correlation between the index value and the ship accident rate. It is expected that this index will become useful to evaluate a preventive status for the prevention of ship accidents and for the maritime safety culture.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.188-194
• /
• 2015

The powered purse seine fishery is an important fishery accounting for 19.4% of adjacent water fishery production in Korea, and the commercial fishing is associated with high rate of fatal and non-fatal occupational injury. The hazard analysis for the fishermen's safety of offshore large powered purse seiner was conducted to serve as a basic data for improving the healthy and safe working environment of fishermen using fishermen's occupational accidents of the national federation of fisheries cooperatives (NFFC) in 2013 (n=583). As a result, the occupational accident occurrence rate of this fishery was 182.6‰ in all industries 30.9 times the rate of that. In addition, death and missing rate was found to have a very serious level management to 25.1‰ in all industries of death of 17.5 times. The accident occurred in 72.3 to 85.8% was happened at sea. The others, slipping and struck by object etc occurred more frequently in order in the frequency of accident occurrence pattern. However, the occurrence rate of death and missing did not match the frequency of accident pattern. In other words, slipping occurred frequently higher while death and missing risk was not high. And the contact with fishing gear and fall in the waters was low while death and missing risk was high. The results are expected to contribute for identification and assessment of safety hazard occurred in offshore large powered purse seiners.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.2
• /
• pp.155-163
• /
• 2018

Bilirubin has an anti-inflammatory effect as an endogenous antioxidant and has been reported to be inversely correlated with hypertension, diabetes, metabolic syndrome, and insulin resistance. On the other hand, there is a lack of research evaluating the association between bilirubin and metabolic syndrome compared to liver-specific indicators. This study examined the association between the total bilirubin and metabolic syndrome prevalence in Korean adults who underwent health screening compared to ALT and GGT. This cross sectional study included 22,568 adult males and females aged 20 years or older who underwent a health examination at the General Hospital of Gyeonggi Province from March 2015 to February 2018. Metabolic syndrome was diagnosed based on the American Heart Association/National Heart, Lung, and Blood Institute (AHA/NHLBI) guidelines. In both genders, the metabolic syndrome diagnosed group had higher liver enzymes, and the total bilirubin and direct bilirubin were lower than those without the metabolic syndrome risk factors. The serum total bilirubin showed a weak inverse correlation with abdominal obesity (r=-0.066 vs r=-0.055) and triglyceride (r=-0.127 vs r=-0.136) in both males and females, which is weaker than ALT and GGT The data were statistically significant. In addition, total bilirubin as well as ALT and GGT in both men and women were not predictors of the likelihood of developing metabolic syndrome.

• Proceedings of The Korean Society of Health Promotion Conference
• /
• 2005.09a
• /
• pp.33-51
• /
• 2005

역량(capacity)이란 진술된 목표를 수행할 수 있는 능력을 의미하므로, 목표란 그 목표를 성취하기 위해서 요구되는 역량의 구체적 요소, 양, 질, 그리고 역량의 소재를 결정한다. 건강증진이란 문제를 파악하고 해결하기 위한, 그리고 조직이나 사람들이 그들의 목표를 성취하기 위한 응용과학으로 발전되어 왔다. 문제를 분석하고, 문제의 원인이나 결정요인들을 파악하고, 그리고 해결책을 제시하고 이를 실행하는데 있어 효과적인 방법론이 중요하다는 점도 또한 밝혀졌다. 그러므로 효과적인 건강증진의 토대가 되는 방법론은 건강을 증진을 위한 역량으로 정의될 수 있을 것이다. 목표는 매우 중요한 역할을 한다. 평균 기대수명을 향상시키는데 요구되는 능력은 생물학적인 그리고 행동적 건강위험을 감소시키는데 필요한 능력과는 다르다. 그리고 질병의 발생을 예방하고, 또는 상해를 예방하거나 모든 사람들이 좋은 건강상태를 얻고 유지하는데 동등한 기회를 갖는 환경을 조성하는 능력도 다른 특성을 지닌다. 방콕헌장은 현 단계의 건강증진을 위하여 건강에 대한 사회적 결정요인에 대한 해결책과 더불어 건강에 도움이 되는 사회적, 경제적, 그리고 물리적 환경을 조성하여 건강형평성을 달성하고자 하는 목표를 설정하고 있다. 지난 30년간 건강증진을 위한 역량에 대하여 많은 것들을 배울 수 있었다. 이러한 역량을 기르고 확대하는 것이 미래를 위한 도전과제가 되며, 비록 우리가 성취한 것이 많지는 않을지라도, 더 많은 것들이 필요하다는 점은 명백해졌다. 우리는 좀 더 야심 찬 목적을 가져야 하며, 이러한 목적달성을 위하려 좀더 의욕적인 노력을 해야 할 것이다. 전문분야로서 건강증진은 다른 사람들에 의하여 발생된 문제에 대한 대책이나 반응에만 중점을 둔 이방인으로서의 역할을 해왔다. 그러나 우리가 도전해야 할 과제는 좀 더 새롭고, 더욱 야심 찬 활동계획을 설정하고 우리가 건강해지고 건강을 유지하는데 필요한 생활환경, 작업환경, 여가환경, 영적 환경을 모든 사람들에게 제공할 수 있는 가족, 지역사회, 그리고 국가가 있는 세계를 만드는 우리사회의 능력들을 신장하는 것이다. 방콕 헌장은 건강증진을 위한 새로운 일련의 목표들을 제시하고 있다. 이제 이러한 목표를 성취할 수 있도록 역량을 기르는 것은 우리의 책임이 되었다. 이는 원하는 활동수준을 달성하기 위한 역량을 조율하고 확장시키는 것을 의미할 것이다. 구체적으로 기존의 건강증진효과성에 관한 증거들을 좀더 큰 규모의 사업으로 확대시키는 것, 공공정책을 개발하고 건강증진 상태를 평가하는 데 다양한 지역사회의 참여를 촉진시키는 능력, 언어, 인종, 성, 종교, 장애 등과 관련된 건강형평성의 문제를 파악하고 제거하는 노력, 그리고 정책결정과 인구집단의 건강과의 관련성에 대한 증거수집, 국가와 지역차원에서 사회적 의사결정 과정에의 적극적 참여, 다른 부문과의 건강증진을 위한 협력 등이 포함된다고 볼 수 있다. 본 논문은 방콕헌장을 분석함으로써 이러한 역량이란 무엇인가에 대한 본인의 의견을 제시하였다. 이러한 아이디어는 토론과 논쟁을 위하여 제시된 것이다. 명백한 것은 건강증진을 위한 역량은 전략이나 기술적인 능력 뿐 만이 아니라 정치적 능력이나 개인적인 능력도 포함된다는 점이다. 가치와 증거들이 정책이나 권력과 함께 결합되어야하며, 정치적인 논쟁 속에서 연마되어야 한다. 우리세계의 미래는 역량에 의존하기 때문이다.

• Geotechnical Engineering
• /
• v.8 no.2
• /
• pp.5-20
• /
• 1992

The physical-based and lumped-parameter hydrologic groundwater flow model for predicting the rainfall-triggered rise of groundwater levels in hillside slopes is developed in this paper to assess the risk of landslides. The developed model consists of a vertical infiltration model for unsaturated zone linked to a linear storage reservoir model(LSRM) for saturated zone. The groundwater flow model has uncertain constants like soil depttL slope angle, saturated permeability, and potential evapotranspiration and four free model parameters like a, b, c, and K. The free model parameters could be estimated from known input-output records. The BARD algorithm is uses as the parameter estimation technique which is based on a linearization of the proposed model by Gauss -Newton method and Taylor series expansion. The application to examine the capacity of prediction shows that the developed model has a potential of use in forecast systems of predicting landslides and that the optimal estimate of potential 'a' in infiltration model is the most important in the global optimum analysis because small variation of it results in the large change of the objective function, the sum of squares of deviations of the observed and computed groundwater levels. 본 논문에서는 가파른 산사면에서 산사태의 발생을 예측하기 위한 수문학적 인 지하수 흐름 모델을 개발하였다. 이 모델은 물리적인 개념에 기본하였으며, Lumped-parameter를 이용하였다. 개발된 지하수 흐름 모델은 두 모델을 조합하여 구성되어 있으며, 비포화대 흐름을 위해서는 수정된 abcd 모델을, 포화대 흐름에 대해서는 시간 지체 효과를 고려할 수 있는 선형 저수지 모델을 이용하였다. 지하수 흐름 모델은 토층의 두께, 산사면의 경사각, 포화투수계수, 잠재 증발산 량과 같은 불확실한 상수들과 a, b, c, 그리고 K와 같은 자유모델변수들을 가진다. 자유모델변수들은 유입-유출 자료들로부터 평가할 수 있으며, 이를 위해서 본 논문에서는 Gauss-Newton 방법을 이용한 Bard 알고리즘을 사용하였다. 서울 구로구 시흥동 산사태 발생 지역의 산사면에 대하여 개발된 모델을 적용하여 예제 해석을 수행함으로써, 지하수 흐름 모델이 산사태 발생 예측을 위하여 이용할 수 있음을 입증하였다. 또한, 매개변수분석 연구를 통하여, 변수 a값은 작은 변화에 대하여 목적함수값에 큰 변화를 일으키므로 a의 값에 대한 최적값을 구하는 것이 가장 중요한 요소라는 결론을 얻었다.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.1129-1135
• /
• 2015

The stow net is a stationary gear made from netting, usually in shape like trawl net without wings. The nets are fixed by means of anchors, placed according to the direction and strength of the current. And the commercial fishing is associated with high rate of fatal and non-fatal occupational injury. The hazard factors analysis for the fishermen's safety of offshore stow nets vessel was conducted to serve as a basic data for improving the healthy and safe working environment of fishermen using fishermen's occupational accidents of the national federation of fisheries cooperatives (NFFC) from 2012 to 2014 (n=1,144). As a result, the average occupational accident occurrence rate of this fishery was 206.9‰ in all industries 36.9 times the rate of that. In addition, average death and missing rate was found to have a very serious level management to 50.4‰ in all industries of death of 42.0 times. The accident occurred in 84.5 to 94.6% was happened at sea. The struck by object, slipping, contact with machinery, contact by object or gear and others occurred more frequently in order on the frequency of accident occurrence pattern. However, the occurrence rate of death and missing did not match the frequency of accident pattern. In other words, slipping occurred frequently higher while death and missing risk was not high. And the contact with fishing gear and fall in the waters was low while death and missing risk was high. The results are expected to contribute for identification and assessment of safety hazard occurred in offshore stow nets vessel.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.118-125
• /
• 2002

Hydration is the main reason for the growth of the material properties. An exact parameter to control the chemical and physical process is not the time, but the degree of hydration. Therefore, it is reasonable that development of all material properties and the formation of microstructure should be formulated in terms of degree of hydration. Mathematical formulation of degree of hydration is based on combination of reaction rate functions. The effect of moisture conditions as well as temperature on the rate of reaction is considered in the degree of hydration model. This effect is subdivided into two contributions: water shortage and water distribution. The former is associated with the effect of W/C ratio on the progress of hydration. The water needed for progress of hydration do not exist and there is not enough space for the reaction products to form. The tatter is associated with the effect of free capillary water distribution in the pore system. Physically absorption layer does not contribute to progress of hydration and only free water is available for further hydration. In this study, the effects of chemical composition of cement, W/C ratio, temperature, and moisture conditions on the degree of hydration are considered. Parameters that can be used to indicate or approximate the real degree of hydration are liberated heat of hydration, amount of chemically bound water, and chemical shrinkage, etc. Thus, the degree of heat liberation and adiabatic temperature rise could be determined by prediction of degree of hydration.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.285-291
• /
• 2015

Exposure to cold sea water can be life-threatening to the drowned individual. Although appropriate life jacket can be usually be provided for the buoyance at the drowning accident, heat loss can make the drowned individual experience the hypothermia. Inflatable life jackets filled with inflatable air pocket can increase the thermal protection as well as the buoyancy force. Because it is important to know how the human body behaves unde the different life jacket, present study compares the thermal insulation capacity of solid type life jacket with that of inflatable life jacket. In order to represent the insulation capacity of life jacket, thermal resistance is estimated based on the assumption of steady-state. Also, a transient three-dimensional thermal distribution of the thigh is analyzed by using finite element method implementing the Pennes bioheat equation. The finite element model is a segmental, multi-layered representation of the body section which considers the heat conduction within tissue, bone, fat and local blood flow rate.

• Journal of the Korean Institute of Gas
• /
• v.2 no.2
• /
• pp.48-54
• /
• 1998

In this study a computerized prototype system was developed with Safety Management Information System(SMIS version 1.0) as a main system and database as subsystems to handle information. Safety management information consists of management aspects and technical elements, but SMIS consists of 4 modules of technical elements to interrelate safety technologies closely. SMIS enables gas industries to manage process safety information effectively and to evaluate hazards. The results from SMIS can be used to the operation manual and the emergency plan. Data base consists of 3 modules of accident data, material data, and equipment data to support SMIS. Also, the case study results proved the usefulness of SMIS for searching and accumulating process safety data. Especially, MIS which has the database suggests a formal structure for scattered raw safety data in gas industries and brings reduction of man power and time.