• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.640-651
• /
• 2016

We propose an effective ToA-based localization method considering accuracy in indoor environments. The purpose of the localization system is to estimate the coordinates of the geographic location of target device. In indoor environments, accurately estimating the location of a target device is not easy due to various errors. The accuracy of wireless localization is influenced by NLOS errors. ToA-based localization measures the location of a target device using the distances between a mobile device and three or more base stations. However, each of the NLOS errors along a distance estimated from a target device to a base station is different because of dissimilar obstacles. To accurately estimate the target's location, an optimized localization process is needed in indoor environments. In this paper, effective ToA-based localization method process is proposed for improving accuracy in wireless sensor networks. Performance evaluations are presented, and the experimental localization system results are proved through comparisons of various localization methods with the proposed methods.

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.183-188
• /
• 2017

In recent years, the automatic remote control controller of the gamma ray irradiator malfunctions, and radiation workers are continuously exposed to radiation exposure accidents. In the non-destructive testing field, much time and resources are invested in establishing a radioactive source monitoring system in order to prevent potential incidents of radiation. In this study, the gamma-ray response properties of the lead monoxide-based radiation detector were estimated through monte carlo simulation as a previous study for the development of a radioactive source location monitoring system that can be applied universally to various non-destructive testing equipment. As a result of the study, the optimized thickness of the radiation detector varies according to the gamma-ray energy emitted from the radioactive source, and the optimized thickness gradually increases with increasing energy. In conclusion, the optimized thickness of the lead monoxide-based radiation detector was $200{\mu}m$ for the Ir-192, $150{\mu}m$ for the Se-75 and $300{\mu}m$ for the Co-60. Based on these results, the appropriate thickness of lead monoxide-based radiation detector considering secondary-electron equilibrium was evaluated to be $300{\mu}m$ for general application. These results can be used as a basic data for determining the appropriate thickness required in the radiation detector when developing a radiation source location monitoring system for universal application to various non-destructive testing equipment in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.22-32
• /
• 2013

Since the percentage of vehicles equipped with Hi-pass, an electronic toll collecting device, has increased rapidly, it is very crucial to determine the optimal location of Hi-pass lanes at a toll plaza in terms of traffic control and operation. In this study, the appropriateness of existing Hi-pass lanes of a toll plaza is evaluated considering its physical geometry and traffic characteristics. A new evaluating criterion called "traffic dispersion rate" is developed in order to measure the level of traffic spreading across the toll booth lanes at a toll plaza. Logistic regression models are constructed to estimate the relationship between the traffic dispersion rate and its affecting variables. The model estimation results show that several variables including Hi-pass lane traffic volume, length of toll plaza, entering/exiting taper lengths, and locations of Hi-pass lanes. The results also suggest that traffic dispersion rate can be increased by adjusting the location of Hi-pass lanes. The study enables us to quantify traffic dispersion rate which can be used to optimize the location and operation of Hi-pass lanes at toll plazas.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.155-162
• /
• 2014

In container terminals, stacking yard is the place where import and export containers are temporarily stored before being loaded onto or after being discharged from a ship. Since all the containers go through the stacking yard in their logistic flow, the productivity of the terminal critically depends on efficient operation of stacking yard, which again depends on how well the stacking locations of the incoming containers are determined. However, a good location for stacking an incoming container later can turn out to be a bad one when that container is to be fetched out of the stacking yard, especially if some rehandling is required. This means that good locations for the containers are changing over time. Therefore, in most container terminals, the so-called remarshaling is done to move the containers from bad location to good locations. Although there are many previous works on remarshaling, they all assume that the remarshaling can be done separately from the main jobs when the cranes are idle for rather a long period of time. However, in reality, cranes are hardly available for a period long enough for remarshaling. This paper proposes a crane dispatching strategy that allows remarshaling jobs to be mixed together with the main jobs whenever an opportunity is detected. Experimental results by simulation reveals that the proposed method effectively contributes to the improvement of terminal productivity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.40-47
• /
• 2018

Porous walkway blocks are constructed for the purpose already, but reserved water is easily consumed due to the bigger permeability than necessary. Furthermore, porous structure reduces the strength of blocks, which resulting cracking and settlements in walkways. In this study, we suggested a solution for given problems by determination for the location of minimum principal stress in walkway blocks against moving foot loads in order to design and verifying the determined location of minimum principal stress. An optimum design with a verification example for determined location of minimum principal stress have been presented in a two dimensional Block member on elastic foundation for pedestrian walkway for reserving water inside. The minimum value for sum of shear forces is found when ${\times}1$ is 58.58 mm(30% of total span, 200mm), while the minimum deformation is located at ${\times}2=80mm$(70% of total span, 200 mm). In a modified model, When moving boundary condition(walkway foot loads) is located at ${\times}1$(=0 mm), the location of minimum principal stresses is found at 168 mm( 84% of span, 200 mm), in which the stress concentration due to the foot load is modeled as two layers of distributed loads(reactions of foundation modeled as springs). Consequently, zero deformed reservoirs for rainwater on the neutral axis (${\times}2=167mm$) has been determined in the modified model with three dimensional FEM analysis verifications.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.164-170
• /
• 2024

The light buoy, a floating structure at sea, is prone to drifting due to external factors such as oceanic weather. This makes it imperative to monitor for any loss or displacement of buoys. In order to address this issue, the Ministry of Oceans and Fisheries aims to issue alerts for buoy displacement by analyzing historical buoy position data to detect patterns. However, periodic lifting inspections, which are conducted every two years, disrupt the buoy's location pattern. As a result, new patterns need to be analyzed after each inspection for location monitoring. In this study, buoy position data from various periods were analyzed using convex hull and distance-based clustering algorithms. In addition, the optimal data collection period was identified in order to accurately recognize buoy location patterns. The findings suggest that a nine-week data collection period established stable location patterns, explaining approximately 89.8% of the variance in location data. These results can improve the management of light buoys based on location patterns and aid in the effective monitoring and early detection of buoy displacement.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.31-38
• /
• 2012

In this paper, requirements of GNSS receiver station installation are derived for optimizing the performance of network based GNSS precise positioning by concern of international organization(IGS, NGS) recommendation. Also a analysis method of network based GNSS precise positioning is suggested in order to evaluate the availability depending on various network configurations. To evaluate network candidates, a performance evaluation method is proposed for positioning of users according to a geometric configuration and the baseline distance. After the proposed method is used to Ochang region that is a the test area 6 network candidates are derived and the performance of positioning was analyzed. Finally, Ansung, Gongju, Eumsung, Boeun network configuration was selected as the best positioning performance. An optimal Receiving station network was selected using the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.231-231
• /
• 2003

사출성형에서의 지금까지의 에어트랩 문제의 해결법은 사출금형 내에 유동적 관계와 사출성형 기술자의 경험으로 해결했었다. 본 연구에서는 에어트랩 문제를 해결하기 위하여 금형을 설계할 때 미리 에어트랩의 위치를 알고 금형 디자인을 수정하여 사출 시간의 단축과 사출성형의 경제적 효과를 얻고자 한다. 사출성형을 할 때 에어트랩의 불량이 많이 발생하는 특징 형상들을 선정하여 각각의 특징형상들을 다시 해석하여 각각의 특징형상들의 에어트랩의 발생위치와 발생률을 알아내고, 사출금형설계에서 에어트랩불량이 일어날 형상들을 특징형상 변수에 대응시켜 최적의 형상으로 수정절차를 개발하였다. 여기서, 사출속도의 조절, 금형 온도의 조절, 수지온도 조절, 금형내의 압력 조절, 벤트의 설치 등은 최적의 상태로 고정시키고 형상수정 요소로 형상의 두께, 각도, 깊이, 필렛, 모 따기를 선정하여 특징형상 상관관계 모델을 구성하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.1
• /
• pp.149-157
• /
• 2008

The reduction of leakage is a major issue of the South Korea water industry. The inclusion of pressure dependent leakage terms in network analysis allows the application of optimization techniques to identify the most effective means of reducing water leakage in distribution networks. This paper proposes a method to find optimal setting and location of control valve for reducing leakage efficiently. The proposed search method differs from previous methods for addressing optimal valve location problem and improves the GA simulation time with guaranteeing for getting the global optimal solution. The strength of this method has been demonstrated by means of case studies. This allows the procedure of optimization to be more robust and computational efficient.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1220-1228
• /
• 1999

In this paper, we deal with an important network design problem in providing multimedia telecommunication services. The problem is to find an optimal gateway location and fiber routing, while minimizing the total cost. The cost elements are the installation cost of add-drop multiplexer and fiber cables. We have developed effective heuristic procedures for the problem. The performance of the developed heuristic shows promising computational results.