• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1803-1807
• /
• 2007

본 연구에서는 개념적인 강우-유출모형인 Tank 모형에 대하여 유역의 다양한 유출특성을 잘 반영할 수 있는 매개변수를 산정하는 데에 그 목적을 두었다. 이를 위한 최적화 알고리즘은 다목적 유전자 알고리즘인 NSGA-II를 선정하여 Tank 모형과 결합하였으며, 4가지의 목적함수를 대상으로 다양한 함수값을 나타내는 비지배관계의 최적군을 생산하였다. 수 백개로 나타나는 최적군의 다양한 해들 중, 특정 목적함수에 대하여서만 정도가 높거나 낮은 편협한 해들을 배제하고 두루 정도가 높은 값을 나타내는 소수의 비지배해들을 추출하기 위하여 선호적 순서화 기법이 적용되었다. 그 결과 많은 해들 중 단 4개의 해가 최우선해의 위치를 갖는 것으로 나타났으며, 이러한 방법론으로 최적화된 해의 적합성을 살펴보고자 국부최적화 기법인 Powell 방법과 기존에 널리 쓰여온 유전자 알고리즘인 SGA(Simple Generic Algoritm)의 결과와 비교 검정을 수행하였다. 비교한 결과 NSGA-II를 적용하여 산정된 매개변수가 4가지 목적함수 및 관측유량과의 통계치에서 두루 양호한 결과를 나타내었다. 또한 관측유량과 함께 도식하여 살펴본 결과, NSGA-II의 최우선해가 타 자동보정 기법에 비하여 상대적으로 관측치에 보다 잘 부합되는 모의유량을 계산하는 것으로 나타났다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.45-50
• /
• 2004

The characteristics and reliability of implanted VCSELs are greatly influenced by the thickness of the semi-insulating layer made by ion implantation for the current confinement. We propose a simple and purely electrical method of estimating the optimum implant depth, and find that the implant front should be located 2-DBR periods above the 1 - λ cavity in order to obtain simultaneously the low threshold current and high reliability.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.364-367
• /
• 2017

The basic design concept of the DACS(Divert and Attitude Control System) propellant is presented and the geometry optimization of the DACS propellant with limited outer diameter and maximum burning rate of the propellant is performed. Two-side burning surface conditions burned at the core and the one side of the propellant are applied to the propellant. And the optimized values for the radius of core, length of propellant, angle of end-side surface are obtained by the PSO algorithm. The direction for DACS propellant design is suggested by analyzing optimized design points for various burning rate.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.98-106
• /
• 2007

This paper represent improved on-line turn off angle control schemes for switched reluctance motors based on current control. For the purpose of finding the optimal commutation switching angle point with improved controller, it is utilized turn on and turn off position calculation with inductance vs. current vs. not linkage analysis method. The goal of proposed paper is the maximization of the energy conversion per stroke and torque ripple reduction and obtaining approximately flat-topped current waveform. The proposed control scheme is demonstrated simulation and on a prototype experimental system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.6
• /
• pp.365-370
• /
• 2023

This paper presents a particle-structure collision model for topology optimization, which requires sensitivity analysis. Therefore, a new model that incorporates sensitivity analysis is needed. The proposed particle-structure collision model conducts sensitivity analysis for topology optimization. To evaluate the accuracy of the proposed model, it was applied to a simplified one-dimensional collision problem. Optimization of the final positions of particles using topology optimization through this model confirmed the suitability of the proposed approach. These results demonstrate that it is possible to consider particle-structure collision in topology optimization.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1478-1485
• /
• 1993

A shape optimization problem is formulated to determine the optimal position of heating lines in a compression molding die. The objective of the problem is that the cavity surface would be maintained by a prescribed uniform temperature. A boundary integral equation for the sensitivity of the temperature in terms of hole position is derived using the method of shape design sensitivity analysis. The boundary element method is employed to analyze the temperature and sensitivity field of the die. The sensitivity calculation algorithm is incorporated in an optimization routine. To demonstrate a numerical implementation, an example problem arising in thermal design of a compression molding die is dealt with, showing that the number of heating lines chosen for the die strongly affects the ultimate uniformity of the cavity surface temperature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.712-721
• /
• 2012

In this paper, we propose an Enhanced cross-layer Geographic Forwarding (EGF) protocol for wireless sensor networks (WSNs). EGF uses an optimal back-off time to make the packet forwarding decisions using only source and destination's location information and energy cost without information about neighbor nodes' location or the number of one hop neighbor nodes. EGF is also a cross-layer protocol by combining efficient asynchronous MAC and geographic routing protocol. The proposed protocol can find optimal next hop location quickly without broadcasting node's location update and with minimizing overhead. In our performance evaluation, EGF has better performance in terms of packet success ratio, energy efficiency and end-to-end delay in wireless sensor networks.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.53-58
• /
• 2010

This research aims to develop practical location-based services that provide users with personalized theater guide services on smart phones. In this research, we have designed and implemented a smart theater guide system for Deahakro, Seoul based on smart phones incorporating GPS. This system first identifies the current position using GPS, and maps the current position onto the map. It is designed and implemented to provide users with personalized information service about the plays and the theaters nearby the current position. It is also optimized to be useful effectively by performing on-site experiments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.201-201
• /
• 2019

세계적인 기상이변으로 가뭄발생 빈도 및 영향이 증가하고 있으며, 급속한 산업화로 사용 가능한 수자원이 점차 고갈되어 있어, 국내에서도 해수담수화(Seawater Desalination)는 새로운 대체수자원으로 많은 관심을 받고 있다. 해수담수에 필요한 에너지 약 50~70%는 역삼투(Reverse Osmosis) 공정에서 발생되며, 해수온도 및 염분도에 따라 많이 변동될 수 있으므로 국립해양조사원(KHOA)의 과거 20년 자료를 이용하여 해수담수화 시설물 위치에 따른 영향을 분석하였다. 해수담수화에 필요한 에너지는 막 제조사에서 제공하는 RO Projection Software를 적용하여 에너지 소모량을 평가하고, 이를 고려한 시설물 위치에 대한 평가 모델을 구축하였다. 기존 해수담수화 시설은 대규모 물 공급이 필요한 지역을 우선적으로 고려했기 때문에 시설물 위치에 대한 객관적인 평가기준 마련이 어려웠다. 그러나 해수담수화 플랜트는 한번 설치되면 장기적인 시설물 유지 및 관리가 필요함으로 경제성을 고려한 최적 입지의 선정은 매우 중요하다. 본 연구는 국립해양조사원의 수집된 자료를 바탕으로 해수담수화 시설물 입지선정을 정량적으로 평가함으로서, 시설물 위치에 대한 의사결정시 참고할 수 있는 기초자료로 활용될 것으로 기대한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.114-122
• /
• 2013

This study introduces an optimization methodology for the determination of gate location that ensures the melt flow balance within a part cavity of injection mold. A new sequential direct-search scheme based on the recursive reduction of the designer-specified gate design area is developed, and it is integrated with a commercial flow simulation tool for optimization. To quantify the level of melt flow balance, we employ the maximum difference among the fill times for the melt fronts to reach the boundary elements of part cavity as objective function. The proposed methodology is successfully applied in the case study of melt flow balancing in molding of a bar code scanner model. The result shows that the melt flow balance at the optimized gate positions is significantly improved from that for the initial gate position.