• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1171-1176
• /
• 2011

This paper describes an analysis on the relationship between elemental image size and object locations in the computational integral imaging reconstruction and in the pickup using a periodically-distributed lenslet array. A sparse sampling effect arises from a periodically-distributed lenslet array in the pickup of 3D objects. The relationship between elemental image size and object location is also reported. Based on the analysis, a method to eliminate the sparse sampling is proposed. To show the effectiveness of the proposed method, experimental results are carried out. It turns out that the theory works.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.283-290
• /
• 2010

The main goal of this study is to examine the use of a hybrid -fuel lean reburning system with air staging for $NO_X$ reduction. The experimental variables include the reburn fuel fraction, sizes of reburn- fuel-injection nozzles, oxygen enrichment ratio, and location of reburn- fuel- injection. The effect of the flow field induced by air- staging combustion on $NO_X$ reduction is considered, and then, the $NO_X$ reduction rate is compared with only fuel lean reburning system. On the basis of the effectiveness of each De-$NO_X$ process, the advantage of using the hybrid reburning system with air staging is determined and discussed.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.11a
• /
• pp.23-26
• /
• 1995

내경 0.1 m, 높이 5.3 m 의 순환유동층 반응기를 사용하여 기체의 역혼합특성을 조사하였다. 기체의 역혼합은 동일한 기상유속일때 고체순환속도가 증가할수록 증가하였다. 희박상영역에서 일정한 고체체류량에서는 기상유속이 증가할수록 벽면에서의 하강흐름도 증가되어 기체의 역혼합은 증가되었다. Tracer 주입위치가 반응기 벽면에서 중심으로 이동할수록 빠른 기체와 고체의 흐름으로 인하여 기체의 역혼합은 상당히 감소하였다. 그리고, 희박상영역에서 core-annulus 구조를 기초로 하여 기체역혼합과 core 와 annulus 간의 물질전달계수를 예측할 수 있는 모델식을 제안하였다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.177-183
• /
• 2001

The KrF laser was employed to study NO fluorescence in lean-bum as well as in soot-bum flames. Blue-shifted NO fluorescence was observed in both of the flames. For both of the flames, the fluorescence intensity of NO and its relative background noise signal were measured with respect to the concentration of seeded NO molecule in the flame and the laser intensity. The results were analyzed qualitatively. Also, NO concentration distribution in the lean-bum flame was qualitatively determined from the intensity of the NO fluorescence. cence.

• Spatial Information Research
• /
• v.23 no.2
• /
• pp.69-81
• /
• 2015

If one can infer the residential area of SNS users by analyzing the SNS big data, it can be an alternative by replacing the spatial big data researches which result from the location sparsity and ecological error. In this study, we developed the way of utilizing the daily life activity pattern, which can be found from timeline data of tweet users, to infer the residential areas of tweet users. We recognized the daily life activity pattern of tweet users from user's movement pattern and the regional cognition words that users text in tweet. The models based on user's movement and text are named as the daily movement pattern model and the daily activity field model, respectively. And then we selected the variables which are going to be utilized in each model. We defined the dependent variables as 0, if the residential areas that users tweet mainly are their home location(HL) and as 1, vice versa. According to our results, performed by the discriminant analysis, the hit ratio of the two models was 67.5%, 57.5% respectively. We tested both models by using the timeline data of the stress-related tweets. As a result, we inferred the residential areas of 5,301 users out of 48,235 users and could obtain 9,606 stress-related tweets with residential area. The results shows about 44 times increase by comparing to the geo-tagged tweets counts. We think that the methodology we have used in this study can be used not only to secure more location data in the study of SNS big data, but also to link the SNS big data with regional statistics in order to analyze the regional phenomenon.

• The Journal of Engineering Research
• /
• v.8 no.1
• /
• pp.59-65
• /
• 2006

본 논문에서는 마이크로폰 어레이 시스템을 이용하여 여러 화자의 음성 정보로부터 각 화자가 위치한 방향을 추정하는 기술 개발 내용을 다룬다. 성능 향상을 위한 전처리 과정으로 비선형 증폭기를 사용하여 거리에 따른 영향을 최소화하는 과정과 잡음에 대한 강인성을 얻기 위해 음성활성 영역을 검출하는 과정을 포함한다. 등간격으로 배치된 마이크로폰 어레이 시스템의 기하학적 특성에 따른 음원의 위치와 신호의 지연시간차이와의 상관관계로부터 화자의 위치를 역으로 추정하는 알고리즘을 기본으로 하여 가능성 척도를 계산하고 이를 활용하여 가능성이 높은 것들을 클러스터링하여 가능성이 있는 후보를 선정하여 화자의 방향을 검지한다. 이 과정에서 오인식을 최소화하기 위하여 가능성이 희박한 영역에 대한 추정 억제 방법으로 부정식 추론법을 적용하였다. 2 화자의 음성 신호를 입력으로 한 실험을 통하여 제안한 방법에 의한 다화자 방향검지의 가능성을 알아보았다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.298-300
• /
• 2002

다차원 데이터를 배열에 저장하는 Multidimensional OLAP (MOLAP) 시스템은 배열내의 위치 정보를 통해 데이터를 신속하게 엑세스할 수 있는 장점을 갖는다. 그러나 실생활의 다차원 데이터는 대체로 희박하여 저장될 때 압축되고, 데이터가 검색될 때는 원래의 위치 정보를 찾기 위해 인덱스를 필요로 하게 된다. 다양한 종류의 다차원 인덱스가 테이블 형태의 데이터를 대상으로 개발되어 있으나, 이들은 데이터의 삽입과 삭제에 유연하게 대처할 수 있도록 하기 위해서 인덱스 공간과 데이터 검색 시간에 약간의 낭비를 초래한다. 본 연구에서는 OLAP 데이터가 주기적으로 갱신되며, 분석에 필요한 집계 데이터도 점진적으로 갱신되기보다 실제로는 새로 생성되고 있다는 점을 고려하여, 읽기 전용 MOLAP 데이터를 위한 인덱스 구조를 제안한다. 데이터는 청크들로 나뉜 후 압축 저장되며, 각 청크는 위치 정보를 유지하면서 비트로 표현되어 인덱스에 저장되도록 하였다. 제안한 비트맵 인덱스는 높은 압축률을 보이며, 범위 질의(range query)를 포함한 OLAP 주요 연산들 처리에 특히 효율적이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.259-264
• /
• 2005

Measurements of heat release are very important for controling combustion instabilities, which are closely connected with combustion instabilities. $OH^{\ast}$ images were acquired through a ICCD in this study, which were in use as indicating index of the reacting region, global and local heat release rate in the lean premixed combustion. The objectives of this study are to see the effect of equivalence ratio on global heat release rate and local Rayleigh index distribution. The local Rayleigh index distribution was acquired by information from central section of flame. This information was from the line-of-sight images which were inverted by the Abel de-convolution. In each condition, the mean value of heat release increased exponentially with equivalence for a periodic time. Local Rayleigh index distribution cleary showed the region of amplifying or damping the combustion instability as the equivalence ratio increased. This could provide an insight on the region of combustion instability and the structure of flames on the equivalence ratio.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1406-1418
• /
• 2002

The direct simulation Monte Carlo(DSMC) method is employed to calculate the etch rate on Al wafer. The etchant is assumed to be Cl$_2$. The etching process of an Al wafer in a helicon plasma etcher is examined by simulating molecular collisions of reactant and product. The flow field inside a plasma etch reactor is also simulated by the DSMC method fur a chlorine feed gas flow. The surface reaction on the Al wafer is simply modelled by one-step reaction: 3C1$_2$+2Allongrightarrow1 2AIC1$_3$. The gas flow inside the reactor is compared for six different nozzle locations. It is found that the flow field inside the reactor is affected by the nozzle locations. The Cl$_2$ number density on the wafer decreases as the nozzle location moves toward the side of the reactor. Also, the present numerical results show that the nozzle location 1, which is at the top of the reactor chamber, produces a higher etch rate.

• Journal of Energy Engineering
• /
• v.12 no.2
• /
• pp.124-130
• /
• 2003

In the present study, the combustion characteristics of methane and hydrogen-supplemented methane as alternative fuels for automotive vehicles were investigated at various hydrogen substitution rate, ignition position and ignition methods in a CVCC. As a result, it is possible to decrease the total burning time and to obtain the reduction of NO concentration by using MSCDI device under the lean mixture conditions without deteriorating combustion characteristics such as combustion efficiency, maximum combustion pressure etc.. And by mixing hydrogen into methane, it was found that the reduction of the total burning time was obtained, in comparison with the use of methane only ; and at the same time, the combustion promotion rate was improved remarkably in comparison with the use of methane only.