• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.220-224
• /
• 2017

In this paper, a method of feeding for the near field beam scanning array antenna with three dimensional focal point has been studied. The conventional array antenna theory is mostly about the far field points. The basic idea is to feed the transmitted signal so that it is in phase at the desired point. In this study, a method is proposed to compensate the phase to have the maximum received power at the point where the measurement point distance is near to the array antenna size. In the proposed method, 11 point source antennas are arrayed in three ways in free space. And the contour map is plotted by calculating the radiation patterns in the three dimensional space and the received signal intensities in the plane within the near space. As a result, it was confirmed that 3 dimensional beam scanning is possible also in the near field of the array antenna.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.80-89
• /
• 2009

The importance of personalized services has been attracted in smart home environments according to the development of ubiquitous computering. In this paper, we proposed the smart home personalized service system based on context information using the speech recognition. The proposed service consists of an OSGi framework based service mobile manager, service manager, voice recognition manager, and location manager. Also, this study defines the smart home space and configures the commands of units, sensor information, and user information that are largely used in the defined space as context information. In particular, this service identifies users who exist in the same space that shows a difficulty in the identification using RFID through the training model and pattern matching in voice recognition and supports the personalized service of smart home applications. In the results of the experiment, it was verified that the OSGi based automated and personalized service can be achieved through verifying users in the same space.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1369-1376
• /
• 2012

In this paper, we propose 2D industrial image registration method for the detection of defects. Proposed method performs preprocessing to smooth the original image with the preservation of the edge for the robust registration against general noise. Then, x-direction gradient magnitude image and corresponding binary image are generated. Density analysis around neighborhood regions per pixel are performed to generate feature image for preventing mis-registration due to moire-like patterns, which frequently happen in industrial images. Finally, 2D image registration based on phase correlation between feature images is performed to calculate translational parameters to align two images rapidly and optimally. Experimental results showed that the registration accuracy of proposed method for the real industrial images was 100% and our method was about twenty times faster than the previous method. Our fast and accurate method could be used for the real industrial applications.

• The KIPS Transactions:PartB
• /
• v.16B no.5
• /
• pp.347-358
• /
• 2009

In this thesis, we develop a vision based hand motion recognition system using a camera with two rotational motors. Existing systems were implemented using a range camera or multiple cameras and have a limited working area. In contrast, we use an uncalibrated camera and get more wide working area by pan-tilt motion. Given an image sequence provided by the pan-tilt camera, color and pattern information are integrated into a tracking system in order to find the 2D position and direction of the hand. With these pose information, we estimate 3D motion plane on which the gesture motion trajectory from approximately forms. The 3D trajectory of the moving finger tip is projected into the motion plane, so that the resolving power of the linear gesture patterns is enhanced. We have tested the proposed approach in terms of the accuracy of trace angle and the dimension of the working volume.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.392-406
• /
• 2004

The purpose of this study is to recognize of the size conditions of ready to wear skirts and analyze the patterns of them so that some educational patterns can be complemented. For this purpose, the investigation of the size conditions was focused on the body sizes and products sizes of the care labels. The patterns of them produced through CAD have been classified into 24 items for the effective and practical analysis. Thus, 9 brands were selected and the basic skirts marketed in 2002 spring were analyzed. The results were as follows. 1. Designs of the backs of the basic skirts produced by 9 brands have the similar designs with two darts. Regarding the designs of the front, 6 brands of them have the designs with no darts, 3 of them have the one with two darts. Designs of waists are composed of low waists and round belts. 2. Regarding the waist circumference as the basic composing elements of skirts, 55.6% of the patterns have the composition of the styles with larger front than the back but 33.3% of them have the same front as back. As to the hips, 77.8% of them have the composition of the patterns with larger back than the front. As for the comparison of waist lines, 55.6% of them have lower front lines than the back lines. 3. Regarding darts placement, it was moved to the side lines from the middle of 1/2 of waist lines, dart intake was 1.8-2.4㎝, the length of the front darts was 7.8-9.5㎝, and the length of the back darts 8.4-11.1㎝ 4. The results of wearing-tests by the sensory evaluation, it showed that almost all the items of the results were satisfactory.

• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.303-309
• /
• 2018

Computer vision technology is a component inspection to obtain a video image from the camera to the machine to perform the capabilities of the human eye with a field of artificial intelligence, and then analyzed by the algorithm to determine to determine the good and bad of production parts It is widely applied. Shape inspection method was used as how to identify the location of the start point and the end point of the search range, measure the height to the line scan method, in such a manner as to determine the presence or absence of the bolt tabs average brightness of the inspection area in a circular scan type value And the degree of similarity was calculated. The total time it takes to test in the test performance tests of two types of bolts tab enables test 300 min, and demonstrated the accuracy and efficiency of the inspection on the production line represented a complete inspection accuracy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.337-339
• /
• 2015

As much interest recently location based service, a study to analyze the movement patterns of the users from getting a lot of large amounts of data collected from a GPS installed in the smart device. Also it is recorded in the log file in the form of day-to-day personal computer, the development of a variety of a smart phone, a black box, and navigation. This data is collected by the user have been developed a variety of personalized services. In this paper, using the black box camera, such as the vehicle to form a social network platform that broadcasts real-time traffic utilization real-time video information.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.2
• /
• pp.161-174
• /
• 2003

Applicability of the Decision Aids for Tunneling (DAT) technique is investigated in this study to better understand the efficiency of the decision making process during tunnel construction. For this, a traffic tunnel under construction is adopted and information on the construction procedure, i.e., overall geology, unit cost and construction time for each excavation process, is provided periodically. Various scattergrams in which cost-time simulation results are plotted are obtained according to the simulation methods and final prediction on the construction time/cost is made. It is found that the uncertainty in the cost distribution is greater than the uncertainty in the time distribution for each cycle simulation and the uncertainties in time and cost for the one time simulations are comparable. Future work will be concentrated on the updating scheme using the face mapping data and various parametric studies will also be performed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.1
• /
• pp.20-28
• /
• 1982

This is a preliminary animal experiment for development of the electronic ears for deaf patients. In 10 Guinea Pigs'ears, we have measured the changes of cochlear microphonics (CM) for Pure sound after application of 100dB white noise sound and NaCl crystal. In response to white noise sound, the amplitude of cochlear microphonics for pure sound has decreased by 30% in 30 minutes, then it has recovered to its initial control amplitude in 90minutes. In NaCl crystal application, the amplitude of cochlear microphonics for pure sound has decriased by 50% in 15minutes and has remained at reduced level. Also, the deaf Guinea Pig shows a motion reflex for sound when we apply electrical signals similar to cochlear microphonics to the electrodes located in the round window of the inner ear.

• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.103-112
• /
• 2014

In recent years, the rapid diffusion of smart devices and growth of internet usage and social media has led to a constant production of huge amount of valuable data set that includes personal information, buying patterns, location information and other things. IT and Production Infrastructure has also started to produce its own data with the vitalization of M2M (Machine-to-Machine) and IoT (Internet of Things). This analysis study researches the applicable effects of Structured and Unstructured Big Data in various business circumstances, and purposes to find out the value creation method for a corporation through the Structured and Unstructured Big Data case studies. The result demonstrates that corporations looking for the optimized big data utilization plan could maximize their creative values by utilizing Unstructured and Structured Big Data generated interior and exterior of corporations.