• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.109-111
• /
• 2019

스마트 항만 IoT 인프라 및 정보수집 제공 장치 개발 과제는 항만 IoT 인프라와 정보수집 및 제공 장치 개발을 통해 항만물류자원들의 상호 간 초연결 네트워크를 구축하고, 이를 기반으로 실시간으로 정보를 수집 분석하여 제공함으로써 화물, 사람, 장비, 시설 등을 포함하는 항만 내 모든 자원의 연결성을 90% 이상 확보하고, 더불어 선박, 외부트럭, 교량, 교통 등을 포함한 항만 외 외부자원과의 연결성을 강화하는 것을 목적으로 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.4
• /
• pp.26-31
• /
• 2010

Finding sufficient supplies of clean energy for future is one of the society's most important challenges according to technologies. Alternative renewable energy source such as solar energy can be substituted for exceeding human energy need. The main factor affect to solar performance is a collective intensity. To enhance intensity, suitable equipment is a solar tracker. The solar tracker consists of sun point detector module, mechanical mechanism module with actuator and control system module. This paper presents sun point detector for solar tracker of daylight system. To evaluate the detecting accuracy, an experimental device is implemented. In experimental results, the accuracy of development system has under 0.11%/0.5deg.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.304-308
• /
• 2005

본 연구는 발포수지 공정에 사용되는 가스벤트를 신발중창 금형에 자동으로 교환하는 장치에 관한 것이다. 가스벤트는 폴리우레탄과 같은 소재를 이용한 신발 미드솔 발포시 발생되는 가스를 제거하기 위한 다공질 소자로서 신발금형 상부에 삽입된다. 가스벤트는 소모성 부품으로 일정주기마다 교환이 필요하나 작업공정상 수작업에 어려움이 많아 자동화된 교환시스템이 요구된다. 하지만 삽입되는 신발중창 금형과 가스벤트간은 유격이 거의 없으므로 본 연구에서는 신발 중창 금형의 손상을 방지하고 보다 신속한 교환을 위해 가스벤트 삽입 및 추출 홈의 위치정보를 영상을 통해서 구하고, 얻어진 영상에 대한 위치 데이터를 기계적 위치 추적 시스템의 데이터로 피드백 하여 홀의 중심 위치에서 가스벤트를 삽입 및 추출하여 자동으로 교환하는 장치를 구현하였다. 영상 처리는 패턴 매칭 기법을 이용하여 홀의 중심점을 구하였고, 이를 PLC로 전송하여 기계 작동 제어 및 XY플로터를 정밀 제어하여 공정이 진행되게 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.79-80
• /
• 2009

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.172-177
• /
• 2023

In this paper, 2-dimensional backtracking method for ultrasonic signals. Ultrasonic sensors are a common technology used in industrial fields as many studies have been conducted on distance measurement and indoor location tracking using transmission and reception devices in pairs. A method for tracking a signal of an arbitrary ultrasonic transmission device on a 2D plane using only a receiver of an ultrasonic signal is proposed. In order to track the ultrasonic signal, the receiver receives the signal by making at least three. The three receivers may calculate a direction and a distance using a time difference in which the ultrasound reception sound is reached. The existing method of tracking signal sources using ultrasonic waves has a problem of time synchronization of devices because the transceivers must be paired or installed independently for each sensor. In order to solve this problem, the distance of the ultrasonic receiver is minimized, and it is configured as one device. The sensor installed as one device may be processed by one operator, thereby solving the time synchronization problem. To increase time difference accuracy, high-speed 32-bit timers with high time resolution can be used to quickly calculate and track distances and directions.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.3
• /
• pp.111-117
• /
• 2008

Presentation with a projector and a laser pointer is widely used in seminar or conference. The function of a laser pointer in the presentation is just indicating a certain object. In this paper, to give a mouse-like function to a laser pointer, we implement a system that locates the track of a laser pointer. The system contains a FPGA that implements camera interface and noise filter. A software for ARM processor is programmed to analyze the spectrum of the captured image and track the pattern of a laser pointer with previously stored image. As a result, the tracking system could locate the position correctly most of time within 20m with 98% accuracy.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.1
• /
• pp.49-56
• /
• 2014

In this study, the generation efficiency of the limited area of a concentrator solar cell was increased by using a solar concentrator and a tracking device. Heat generated by the solar cell was collected using a thermal absorber for supplying hot water or heating. Thus, the concentrator solar cell system provided electricity and heat simultaneously. Tracking of the sun by detecting the sun's position, repositioning of heating device towards the east after sunset, and shutting down of system after sunset were successfully implemented using an illuminance sensor (CdS) and Simulink, a commercial software package. We performed parametric analysis of the velocity, fin installation, and entrance location with respect to the operating temperature of the concentrator solar cell. A heat transfer simulation model was developed for comparing the actual temperature profiles of the concentrator solar cell and thermal absorber, and good agreement was found between the results of the simulations and the experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.49-58
• /
• 2019

The Scientific balloon is a flight system that could recover an entire platform at the end of the mission. The recovery takes place mainly in low-density populated areas, taking into account for the possible damage to the human life and public safety. In Republic of Korea, on the other hand, marine recovery should be considered due to the dense mountainous terrain and restrictions of the peninsula. In this operating environment, the envelope must be recovered because of severe marine pollution that may occur after the splashdown. Therefore, in this study, the separation device that consists of a location tracker and the waterproof system were developed. The device includes data transmission/reception, separation, and waterproof systems which are manufactured considering the environmental condition of the Korea. The performance of the device and the trajectory of the envelope were verified by conducting a separation test of a 20km platform at a target altitude and the recovery of the zero-pressure balloon.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.85-90
• /
• 2022

In this study, in order to test the performance of the aircraft system, a threat signal simulator that can transmit a signal similar to the actual threat to the aircraft under test with high power was designed. The high-power threat signal simulator should be able to transmit broadband (UHF band, L band, S band, X band) communication signals and radar signals, and control to transmit signals accurately directed to the aircraft through interfacing tracking radar. The signal strength of the developed equipment is 63 dBm to 93 dBm or more depending on type of signal, and the tracking precision is less than 0.1 degree, which satisfies the required performance. And it was confirmed that the antenna of the high-power threat signal simulator can accurately direct the signal to the aircraft position through the tracking radar interfacing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.4
• /
• pp.411-420
• /
• 2016

Efforts have continued in recent years to research and develop new alternative energy sources to replace coal and oil. These days interest is exploding in new pollution-free renewable energy due to the rising prices of finite energy sources. In the field of solar energy, one of new renewable energy that has been actively researched and commercialized, research efforts have been focused on solar light energy, whose efficiency has, however, reached a saturation point already. Thus, this paper proposed a solar tracking-type parabolic heat collection device to utilize solar thermal energy rather than solar light energy. The proposed device was designed in a parabolic form to collect solar heat effectively. The investigator made its prototype by incorporating a five-axis censor-based solar tracking technology in it to sense changes to the location of the sun according to the seasons and periods. In addition, an administrator interface was designed and implemented for the efficient management of heat collection device.