• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.76-80
• /
• 1993

절삭가공중에서 DRILL가공은 일반기계가공 공정중에 23 .approx. 25% 정도의 비율을 점우하고 있는 중요한 위치의 작업의 하나이고 또한 요구되는 정밀도를 만족하기 어렵고, 높은 생산성이 요구되는 가공법이다. 기계가공의 무인화, 자동화, 고능률화 및 정도향상 이라는 측면에서 더욱 이에 대응할 수 있는 가공방법 즉 공작물, 공구재료, 공구형상 및 절삭조건등에 걸쳐 광범위하게 연구개발 되어 져 가고 있다. 이 작업중 특히 곤란한 것은 깊은 구멍가공(DEEP HOLE DRILL)으로서 깊이/직경의 비가 극히 높은(약 5배이상) 절삭가공 의 경우에는 CHIP의 배출, 절삭날부의 윤활, 공구의 진동등의 문제로 인하여 일반적인 절삭가공 공법으로는 가공이 여려운 경우가 많다. 본 연구는 Solid BTA Drill(Mlti-tip Drill Head with Brazed Tips)에 의하여 가공에요구되는 절삭성 분석과 절삭조건의 변화에 따른 공작물의 가공정도 즉, 가공구멍의 직경의 변화, 표면거칠기. 진원도의 변화상태 및 공구의 마모된 현상에 대하여 실험조사하여 공구에 제한된 수명을 연장하고, 제품에 요구되는 품질수준을 확보하는가에 대하여 본 실험을 통하여 분석하도록 하였다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.4
• /
• pp.49-53
• /
• 2008

비행 편수의 증가 추세는 관제 밀집도를 높여 항공관제 사와 조종사간 communication 실수를 유발할 수 있는데 특히 호출 부호(Call Sign)의 혼동, 착각에 의한 경우가 많은 것으로 나타나고 있다. 항공 관제사와 조종사간의 communication 실수는 항공기 고도 위반, 활주로 침범, CFIT, 공중 충돌, Near Miss로 인한 위험 상황을 초래할 수 있다. 본 연구는 민간 항공사에 근무하는 조종사들의 유사 콜사인에 대한 혼동 정도와 위험성 인식을 설문 조사하였으며 이를 분석하여 방지 대책을 모색하였다. 국내 조종사와 외국인 조종사의 혼동 정도와 위험성 인식의 차이는 나타나지 않았으며 공항이 위치한 국가에 따라 혼동 정도의 차이가 있었다. 동일 항공사에서 나타나는 유사 콜사인은 자체 해결 가능하였지만 타 항공사와의 유사 콜사인을 해결하는 데는 한계가 있어 관계 기관의 적극적인 중재가 요구된다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.3 s.26
• /
• pp.3-11
• /
• 2003

This study has made photographing respectively by changing the photographic distance, converging angle, picturing direction by use of Rollei d7 metric and d7 $metric^{5}$ that is a measurement digital camera. And also in order to minimize the errors happened at the relative orientation, we have sorted out the round target that the relative orientation is automatically on the programming and have calculated RMSE by carrying out the bundle adjustment. We think that such a study could be used as very important basic data necessary in deriving the optimal photographic conditions by the close-range digital photogrammetry and in judging such a degree.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.633-636
• /
• 2008

일반적으로 부식된 부재의 두께를 측정하는 데는 많은 불확실성이 존재하며, 부식의 진행정도에 따라 부재의 부식 두께는 측정 위치마다 다르므로, 기존의 신뢰성 해석 방법을 사용하여 모든 불확실성을 고려한 정량적인 안전도를 평가하는 것은 실질적으로 불가능하다. 따라서 본 논문에서는 불확실 신뢰도 기법을 적용한 안전도 분석 절차를 제안하였으며, 효율성과 적용성을 검토하기 위하여 국내 공용중인 사장교에 적용하였다. 심하게 부식된 부재의 잔존 두께의 불확실성은 부식이 진행되는 정도에 따라 증가하므로 부재의 부식 두께를 불확실 정도로 표현되는 불확실 구간으로 표현하였으며, 기존의 신뢰성 기법과 불확실 신뢰도 기법의 비교를 수행하였다. 이러한 불확실 신뢰도 기법은 주관적이거나 조건부 독립에 대한 통계적 판단을 이용하여, 부식된 구조물의 안전도 평가나 위험도 평가를 하는 경우에 유용하여 적용할 수 있을 것으로 판단된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.595-602
• /
• 2000

This paper is aimed at developing an location tracking system of mobile station based on currently available mobile communication network or mobile Phone and PCS(Personal Communication System). When the location tracking of mobile stations is in services, Emergency-119, all of crime investigation, effective urban traffic management and the safety protection of Alzheimer＇s patients can be available. In order to track the location of the mobile and base station, assumption in this paper is to use the statistic characteristics of LOS when modeling the standard noise in case that radio path is LNOS environment. The standard variation of the standard noise is $\pm150$. First, location is estimated by the positioning algorithms of TOA and TDOA and compared each other. Second, after canceling the standard noise by Kalman filter, location is estimated by the above two positioning algorithms. Finally, the location by the Kalman filter and two positioning algorithms is estimated by smoothing method. As a result, 2 dimensional average location error is imvoved by 51.2m in TOA and 34.8m in TDOA when Kalman filer and two positioning algorithms are used, compared with the two positioning algorithm used. And there is 3 more meter improvement after smoothing than Kalman filer and two positioning algorithms used.

• Journal of Internet Computing and Services
• /
• v.9 no.4
• /
• pp.51-59
• /
• 2008

In wireless sensor networks, one of most common location detection methods that do not require additional devices such as GPS and ultrasonic sensor, is the location detection method based on received signal strength. However, measured received signal strength will fluctuate over time mainly due to physical radio channel characteristics between nodes, which subsequently will cause errors to measured distance between nodes. Since these contaminated distance data are utilized to detect the location of unknown node, there will be accumulated errors in the location of unknown node. In order to overcome the limitation of the location detection method based on received signal strength, we propose a location scheme in which reliability information of distance data as well as distance data between nodes are utilized to estimate the location of unknown node. Through simulation, it is shown that the proposed scheme can accomplish 30% capacity improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.97-108
• /
• 2013

Recently, mobile devices were increased and there was a sharp rise in demand. To exploit the location information of each device, many researcher was studying locating systems. The favorite locating or positioning systems were a GPS using satellites and a RTLS using wireless communication between devices. If some obstacle existed nearby the target device, The system have difference of performance. The obstacles near targets were caused signal disconnection and reflection because of NLOS condition. As the result, the NLOS condition degrade the locating performance. In this paper, we propose a locating system which is cooperated two systems using information reliability estimates from LOS/NLOS condition. We developed proposed system. In addition, we performed fields test and simulation tests at various environment for performance evaluation. As the result, the test showed 97% success rate to estimate NLOS condition. Furthermore, the simulation result of our locating system was increased to 89% compared with a single system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.181-189
• /
• 2002

This paper describes the positioning accuracies for single and multiple reference stations at fixed stations in Yosu harbor and Pukyong National University in the south coast of Korea from Jan. to Oct. 2001. Also we observed the change of positioning accuracy during a day and the available range of the DGPS reference station. he results obtained are main summarized as follows; 1. With single DGPS reference station, 2drms and the average positioning .error were 5.6m, 7.3m respectively. Measurement positions indicated an incline toward one way away from the actual position. 2. With multiple DGPS reference stations, 2drms and the average position error were 5.5m, 3.2m for the arithmetic mean, respectively. They were 5.3m, 3.8m for the weighted average, respectively. As far as the separation between the user and the reference station, using multiple reference stations improved position accuracy more than using single reference station. 3. The average positioning error increased between 16: 00 and 22 : 00. The average number of observed satellite and HDOP were 7.1m, 0.49 respectively. 4. Coverage of DGPS reference stations in the south coast of Korea was estimated to be 110nm. Signal strength and signal to noise ratio was not available the DGPS signal below 19㏈, 8㏈ respectively.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.5
• /
• pp.549-558
• /
• 2012

This study identifies the damage detection of truss structures by using genetic algorithm(GA) from changed elements properties. To model the damaged truss structures, the modulus of elasticity of some specific elements is reduced. The analysis of truss structures is performed with static analysis by applying uniform load, and the location and extent of structural damage is detected by comparing the stain of each element of healthy truss structures with damaged truss structures using genetic algorithm. In this study, some numerical examples are presented to detect the location and extent of damage using genetic algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.42-48
• /
• 2011

This preliminary study is about the application of the compound source to the active noise barrier system as control sources. A compound source is composed of two monopole sources but having opposite phase. However, both monopole sources in one compound source are not independently controlled. The source strength of monopole source close to the noise source is proportional to the other one. Therefore, the cost for the hardware system is cheaper than usual system but known to possibly having a similar performance in generating anti-noise acoustic field. In this study, using a simple active noise barrier system model having a non-reflective floor, the effectiveness of the system with compound sources is investigated through computer simulations and shows 30~40 % performance improvement of noise reduction.