• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.173-174
• /
• 2015

컨테이너 터미널에서 이적작업은 적하작업과 반출작업을 신속하게 처리하기 위해 장치장에 흩어져 있는 컨테이너들을 재배치하는 것이다. 본 연구는 수직 배치형 장치장 블록 내에서 컨테이너 재배치 작업계획 문제를 다룬다. 재배치 작업계획은 대상 컨테이너, 옮겨질 위치 그리고 재배치 작업 순서를 정하는 것이다. 본 연구는 재배치 작업시간, 반출작업, 적하작업의 가중시간 비용을 최소화하면서 재배치 작업동안 공간 가용성이 만족되도록 장치위치와 작업순서를 함께 결정하는 혼합정수계획모형을 개발하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1345-1349
• /
• 2004

하천수를 취수원으로 하는 우리나라의 많은 취수장의 경우, 유사유입 및 유로 변경에 따른 취수장애를 겪고 있으나 유로의 변화특성을 분석하고 취수장 위치선정에 활용한 수 있는 실무적 기법에 대한 연구는 거의 없는 실정이다. 따라서 본 연구에서는 유로가 좌${\cdot}$우안으로 수시로 바뀌어 갈수기는 물론 평수기에도 취수장애를 겪고 있어 대책 강구가 요구되는 국내 취수장을 선정하고 취수지점의 계속적인 하상 및 유로변동 현상을 규명하여 안정적인 취수를 가능케 하는 근본적인 대책을 수립하기 위한 유로변화 특성 분석기법을 제시하였다. 연구내용으로는 과거 30여년에 걸친 하도의 평면학적 변화양상을 인공위성영상자료, 지형도자료 및 하도단면 실측자료를 활용하여 각 지점별 유로변화에 대한 동계분석을 실시하였다. 또한 하도의 전단응력, 마찰 속도 등을 산정하여 하상형태를 분석하여 대상구간의 흐름특성을 분석하였다. 분석결과 하도의 사행은 지속적으로 진행되고 있음을 알 수 있으며 특히 취수장부터 상류 수km구간 하도에서는 밤섬이 지속적으로 생긴다 사라지는 현상이 반복되고 있음을 확인할 수 있었다. 취수장 주변에서는 유로의 변동이 하폭의 $70\%$에 달하는 심한 유로변화 특성을 나타내고 있어 취수지점으로 적당치 못함을 알수 있었으며 주변 상하류 십수 km구간 중에는 유로의 변화가 거의 없는 구간도 존재함을 알 수 있이 본 연구의 유로변화 분석기법이 향후 유로변화 분석 및 취수장 건설 위치 선정에 효과적인 분석기법으로 활용 가능함을 입증하였다.

• Nuclear Engineering and Technology
• /
• v.6 no.4
• /
• pp.249-252
• /
• 1974

The equilibrium configuration of the screw belt pinch is obtained as the first-order correction on that of the straight pinch of infinite lenghth.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.17-20
• /
• 2007

Effect of radial position of half-wave resonator is investigated experimentally for acoustic damping of tangential mode in a combustion chamber by adopting acoustic cold test. When resonator with optimal tuning length is installed， damping is enhanced as its radial location is away from the center of the faceplate. And, radial profile of damping factor is similar to that of the amplitude of the acoustic mode to be damped. As the location is close to the center, acoustic damping is mitigated and independent on the resonator length. on the other hand， the resonator with non-optimal length dose not show any effect of its radial position.

• Explosives and Blasting
• /
• v.30 no.1
• /
• pp.29-36
• /
• 2012

In this study, the influence of priming location inside a blast hole on the ground vibration has been studied. In most of the previous studies dealing with the ground vibration, the effect of priming location in a blast hole was usually considered in a limited way. Thus, it seems that the results of the studies can be applicable only to the relevant sites. Considering the fact that the mechanism of ground vibration caused by blasting is quite complex, the priming location can have a considerable effect on the ground vibration in certain situations and be an important parameter in a blasting design. To identify the characteristics of the wave propagation according to priming locations, total 72 test blasts were carried out with different spacing, burden, drilling length, and charge, and prediction equations were derived. The characteristics of ground vibration, which was changed according to the priming location, was analyzed by using the nomogram of peak particle velocity (PPV) record. Attenuation relations, which were also dependent on the priming location, were analyzed. In this case, four different amounts of charge, that is, 0.5, 1.6, 5, and 15 kg, were used for the test. This criterion of charge amount is specified in the "Blasting design and construction guidelines to road construction" by the Ministry of Land, Transport and Maritime Affairs of Korea.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3
• /
• pp.166-170
• /
• 2005

This paper describes the experimental study for the position estimation method of underwater sound source using the Nearfield Acoustic Holography. The result confirms that it can be used in the identification of underwater noise sources. The sound sources in the experimental work consists of 2 spherical projectors and the near-Held sound pressure is measured in the hologram plane. From the cross-power spectra of the measured data, the complex sound pressures on the hologram plane is derived and its spatial transformation gives sound fields in a source region. The obtained sound fields in a source region showed that the position of each sound source and their relative source strength are exactly estimated. In conclusion, this technique can be applied for estimation of each source position and its relative strength contribution for the underwater multiple sound sources.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.231-238
• /
• 2020

The main purpose of this current study was to identify the structural relationships between the variables of team attachment, location-based service, and future fan behaviors by utilizing Technology Acceptance Model (TAM). Among the 10 KBO franchises, SK Wyverns and KT Wiz were qualified to have their own smart applications programs and the relevant infrastructure at their home venues. Thus, a total of 500 surveys were collected from SK Wyverns and KT Wiz games during September of 2019 and a total of 448 were used for data analysis after deleting 52 surveys due to the missing data. According to the results of a structural equation modeling, 12 positive (+) causality out of 14 hypotheses were confirmed that there must be causal relationships among the variables of location-based service at the smart stadium, TAM, fan attachment, and future fan behavior. It is hoped that this study can be contributing to the foundational developments of marketing strategies by adopting the new technological advancement in the Korean sport industry in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.83-88
• /
• 2001

In this paper, matched field processing algorithm robust to environmental mismatches in an ocean waveguide based on feature extraction is summarized. However, in applying this processor to localize a source there are two preliminary issues to be resolved. One is the number of eigenvectors to be extracted and the other is the number of environmental samples to be used. To determine these issues, the relation between the number of dominant modes propagating in a given ocean waveguide and that of eigenvectors to be extracted is analyzed. Then, the analysis results are confirmed by the subspace analysis. This analysis quantifies the similarity between the subspace spanned by the signal vectors and that spanned by the eigenvectors to be extracted. The error index is defined as a relative difference between the location estimated by the current processor and the real source location. It is identified that in the case of extracting the largest eigenvectors equal to the number of dominant modes in a given environment, the processor localizes the source successfully. From the numerical simulations, it is shown that use of at least 30 environmental samples guarantee stable performance of the proposed processor.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.97-109
• /
• 2014

In order to identify the characteristics of the propagation depending on delay time (20, 25 ms) and priming location (top priming, middle priming, bottom priming), test blasts were carried out a total of 4 times using different spacing, burden, drilling length, charge per delay and was derived the formula to predict blast vibration. This study investigated the characteristics of vibration by analysis of the nomogram and prediction of Peak Particle Velocity (PPV) from delay time and priming location by the formula to predict ground vibration. And it analyzed the trends of vibration increase by standards charge 0.5, 1.6, 5, 15 kg. Standards charge is "Blasting design and construction guidelines to road construction" by the Ministry of Land, Infrastructure and Transport. Depending on the charge in favor of vibration control method is proposed. Thus, when the design was to be used as a variable.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.845-849
• /
• 2005

도시지역 공간의 한정성으로 인해 하천연변의 저지대에 까지 토지이용도가 극대화되고 있다. 이러한 상황은 치수방재의 측면에서 과거와 같은 외수의 범람에 의한 홍수피해가 아닌 내수의 배수불량으로 의한 침수피해의 증가를 가져 왔다. 서울특별시의 경우 유수지 및 빗물펌프장의 보강을 통해 치수안전을 확보하고 있다 빗물펌프장 운영에서 가장 중요한 요소는 펌프의 가동과 배수문의 개폐을 통한 외수의 차단과 내수의 방류에 있다. 특히 배수문의 개폐시기가 적절치 않은 경우, 외수가 유수지로 들어와 펌프장의 기능을 저해 할 수 있다. 그러나 배수문의 개폐는 현재 자동화 되지 못하고 운영자에 의하여 경험적으로 운영되고 있다. 본 연구에서는 수리학적 홍수추적(Hydraulic Flood Routing)방법 중 FLDWAV모형을 사용하여 한강변에 위치한 빗물펌프장의 외수위를 모의 하였다. 모형의 모의 결과와 한강흐름의 실측치를 비교 검토하고, 이를 기초로 각 빗물펌프장의 배수문을 가동해야 하는 팔당댐 방류량과 도달시간을 구하고, 하류에 위치한 빗물펌프장의 황해의 조위 영향등을 분석, 운영자가 배수문 개폐시기를 예측하여 빗물펌프장의 운영 자료로 이용과 유수지$\cdot$펌프장 운영체계의 자동화에 기여하고자 한다.