• Journal of Digital Contents Society
• /
• v.9 no.3
• /
• pp.483-490
• /
• 2008

In this paper, we propose an active location acquisition terminal needing to construct an infrastructure based on a LBS and analyze the performance in real field. The proposed terminal is compounded with a GPS module and a CDMA module, so it can get the location information independently using satellite GPS signal and the proposed terminal can decide a user location with the location information of a base station in satellite GPS shadowed area. This is the distinguishable location acquisition method from the conventional A-GPS, and it complements a disadvantage of the conventional GPS. From these results, we can confirm that the proposed active location acquisition terminal is suitable to the requirements for the LBS which are the independent location acquisition ability, the continuity in the location information acquisition and the maintenance in the location information security.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.391-398
• /
• 2003

Research was conducted to establish the leaf and petiole sap test to diagnose the nutritional status of tomato. The concentrations of $NO_3$, $PO_4$, K, Ca, Mg and $SO_4$ ions extracted from the leaves and petioles in the different positions in a plant were measured and compared with their corresponding inorganic contents in the leaves analyzed by the chemical method. The ionic concentrations in the leaf and petiole sap showed the different values depending on their positions in a plant. The leaves and petioles in the lower positions of a plant had higher concentrations of $NO_3$, Ca, Mg and $SO_4$ ions. In particular, there were greater changes of ionic concentrations and less increases in the leaf length and width from the 9th compound leaf down from the uppermost cluster. On the other hand, the leaflets in a compound leaf had the same ionic concentrations. Therefore, it appeared that the optimal sampling position of leaf and petiole for the sap test is the leaflets of the 9th compound leaf down from the uppermost cluster. A good correlation between the sap test and the chemical analysis of plant showed that the ionic concentrations in the leaf and petiole sap reflect the nutritional status of tomatoes.

• Journal of Broadcast Engineering
• /
• v.23 no.1
• /
• pp.154-161
• /
• 2018

As the number of smartphone users increases, research on indoor location recognition service is necessary. Access to indoor locations is predominantly WiFi, Bluetooth, etc., but in most quarters, WiFi is equipped with WiFi functionality, which uses WiFi features to provide WiFi functionality. The study uses the random forest algorithm, which employs the fingerprint index of the acquired WiFi and the use of the multI-value classification method, which employs the receiver signal strength of the acquired WiFi. As the data of the fingerprint, a total of 4 radio maps using the Mac address together with the received signal strength were used. The experiment was conducted in a limited indoor space and compared to an indoor location recognition system using an existing random forest, similar to the method proposed in this study for experimental analysis. Experiments have shown that the system's positioning accuracy as suggested by this study is approximately 5.8 % higher than that of a conventional indoor location recognition system using a random forest, and that its location recognition speed is consistent and faster than that of a study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.22-32
• /
• 2015

This study intended to analyze an influence of the structure elements on the optimal location for one-outrigger system in tall building by using MIDAS-Gen. In this investigation, the analysis parameters were the outrigger position and the stiffness of main structure elements such as shear walls, outrigger systems, exterior columns connected in outrigger system and frames not to be connected in outrigger system. For the objective of finding out the optimal location for one-outrigger system in high-rise building, we studied the lateral displacement in top level of 80 stories building. The results of this study indicated that the outrigger location and the stiffness of main structure elements such as shear walls, outrigger systems, exterior columns connected in outrigger system and frames not to be connected in outrigger system had an influence on the optimal location of one-outrigger system. In addition, it is showed that the research results can be very useful in obtaining the structure design data for looking for the optimal location of one-outrigger system in high-rise building.

• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.300-306
• /
• 1997

The effective resolution of the direct current potential drop (DCPD) method for crack length determination is strongly affected by a number of factors including wire locations and calibration method. In the present study, the effects of wire locations, thermal EMF and reference probe locations on the accuracy of calibration methods, including Hicks-Pickard equation and Johnson's equation, were examined with the CT specimens which were nine times larger than the standard specimen. In light of experimental results, it was found that Hicks-Pickard equation can accurately represent the a/W-V/Vo relationship when current input wire is located at the load line. It was also found that the accuracy of DCPD method can be greatly improved with the thermal EMF calibration and the use of Vo value at a/W = 0.241. The use of reference potential was found to be impractical when current input wire is located at the load line.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.598-608
• /
• 2014

The first operation of alarm system starts at a detector. And the largest effect is produced on the operation of detector by the fire source position and installation position. Nevertheless, the Korean standard for the installation of detector only specifies matters of fire detector installation according to area and height, without consideration of installation position and fire source position. Therefore, this study carried out a fire test in consideration of detector installation position and fire source position (5 places) in order to minimize casualties owing to the fast operation of fire detector when a fire occurred. Considering that it took the longest time for a detector close to a wall to work in the results of this test, it was possible to find that a minimum clearance to the wall was required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.86-97
• /
• 2009

RTLS is a system for automatically locating and tracking people and objects. The TDOA-based RTLS determines the location of the tag by calculating the time differences of a signal received from the tag. In TDOA-based RTLS, time synchronization is essential to calculate the time difference between readers. This paper presents a precision time synchronization method for TDOA-based RTLS over IEEE 802.15.4. In order to achieve precision time synchronization in IEEE 802.15.4 radio, we analyzed the error factors of delay and jitter. We also deal with the implementation of hardware assisted time stamping and the Kalman filtering method to minimize the error factors. In addition, this paper described the experiments and performance evaluation of the proposed precision time synchronization method in IEEE 802.15.4 radio. The results show that the nodes in a network can maintain their clocks to within 10 nanoseconds offset from the reference clock.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.89-97
• /
• 2015

In this paper, we propose a handoff method supporting LBS (Location Based Services) Information in mobile clouding environment. In mobile clouding computing, handoff delay and re-authentication is occurred. A mobile node needs re-authentication procedure from cloud server whenever it arrives new AP. But Using of location information of node enables to reduce delay time due to re-authentication. To reduce re-authentication delay time, proposed method stores location information of APs on WiFi based location server to complement. GPS-based technology which can't receive satellite signal in indoor and then node collects location information of AP at handoff time. And also enables to process LBS without increasing handoff delay by splitting the process of handoff from process of requesting location information. For analysis of proposed method, We analyze handoff delay and location information process time and have compared previous handoff method in cloud environment. We confirmed that proposed method shows lower delay time without increasing LBS process time than previous method because node receives location information from location information server when handoff is occurred.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.1
• /
• pp.33-40
• /
• 2008

This paper proposes a sensorless drive method that estimates the rotor position by analysing Back EMF of single-phase Switched Reluctance motor (SRM). The rotor position information is necessary required, because SRM's torque is generated by exciting a stator winding according to rotor position. In order to detect the position of the rotor, the various rotor position sensors have been used. However, most of the position sensors not only increase the construction cost and the volume of the motor but also decrease reliability of driving system with environment. This paper proposed the method using the Back EMF to solve such problems. When a rotor and stator are overlapped, the Back EMF is sharply changed. By detecting this point, the rotor position can be estimated. Thus SRM is driven by turn on and turn off switches at the proper position through speed calculation. The validity of proposed method is verified through simulation and experiment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.531-537
• /
• 2010

Real-time Aerial Monitoring System performs the rapid mapping in an emergency situation so that the geoinformation could be constructed in near real time. In this system, the position and attitude information from GPS/INS integration algorithm is used to perform the aerial triangulation(AT) without GCPs. Therefore, if we obtain Exterior Orientation(EO) estimates from AT sequentially, EO are used as the measurements in the Kalman filter. In this study, we simulate the GPS/IMS/Image data for an UAV-based aerial monitoring system and compare the GPS/INS/AT with and without from AT. Comparative analysis showed that result from the GPS/INS/AT with EO update is more accurate than without the update. However, when the vehicle turns, the position error significantly increases which need more analysis in the future.