• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.2
• /
• pp.137-146
• /
• 2007

Numerical analyses are performed to show the effect of stiffening facade riggers on the behavior of the structure and to investigate the optimum locations of facade riggers. Optimum locations of the facade riggers to minimize the drift at the top of the structure are obtained by maximizing the drift reduction caused by the facade riggers and are significantly influenced by the bending and shear stiffnesses of the braced frame and facade riggers. Three standard load cases of uniformal and triangularly distributed lateral loads as well as a lateral point load at the top of the structure are considered in this paper Optimum locations of facade riggers are plotted as functions of nondimensional relative stiffness parameters ${\omega}$ and ${\beta}$ for structures with one to four riggers. Although the analysis presented herein is based on certain simplifying assumptions, it is believed that the results do provide sufficiently accurate information for determining the optimum locations of facade riggers in highrise structures.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.329-334
• /
• 2007

The infection of primary teeth occurs by caries or trauma. But, if it is not treated on time, the complication may occur such as enamel hypoplasia, discoloration, impaction, displacement and dilaceration of permanent successors. The periapical lesion on primary tooth could displace the permanent successors in any direction. Treatment options of displaced tooth are observation after extracting the primary teeth, surgical exposure orthodontic traction, transplantation and extraction. In these cases, displacement of permanent central incisor caused by the periapical lesion of primary teeth was observed. The spontaneous eruption after extraction of primary teeth was expected considering degree of displacement, development of root and direction of eruption. This case report shows spontaneous eruption of displaced permanent tooth germ was achieved with periodic examination after extraction of primary teeth.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.3
• /
• pp.11-21
• /
• 2002

The evaluation of displacement ductility is performed by direct method through tracking the inelastic hysteretic behavior of RC bridge columns subject to cyclic loading using a flexibility-based fiber element mode. To reasonably track the inelastic behavior until the RC bridge column reaches its ultimate state, the average stress-average strain relations and joint elements, which agree well with experiments, are modified and applied considering the tension stiffening behavior and discontinuous displacement between the column and its base. In addition the evaluation of displacement ductility is performed by a direct method easily applicable to numerical analysis. Locations for the integration points, values for the post-crushing concrete strength and low-cycle fatigue failure of longitudinal reinforcement that affect the calculation of yielding and ultimate displacements are proposed for the application to flexibility-based fiber element model. Since less than 10% of error occurs during the displacement ductility analysis, the yielding and ultimate displacements evaluated by the applied analysis method and model appear to be valid.

• Korean Journal of Optics and Photonics
• /
• v.22 no.3
• /
• pp.151-158
• /
• 2011

This paper reports design and demonstration of optical systems for reflective-type remote optical displacement sensors. Optical systems for light illumination sources and a position sensitive detector (PSD) for the displacement sensor were developed to sense displacement of bridges and instability of skyscrapers in a distance range from 10 m to 250 m to an accuracy better than a few mm. Performance of the optical systems was verified by composing a displacement sensor and by using it in measurement of displacement of a remote target with proper reflective optics depending on distance. The displacement sensor was composed of two LED light sources, each with collimating optics, and a two-dimensional PSD with telescope-type optics. Its displacement resolutions was measured to be 0.1 mm at a distance of 10 m and less than 3 mm at a distance of 250 m.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.8
• /
• pp.780-788
• /
• 2009

AE technique was applied to the static structural test of the composite wing structure to evaluate the structural integrity and damage. During the test, strain and displacements measurement technique were used to figure out for static structural strength. AE parameter analysis and source location technique were used to evaluate the internal damage and find out damage source location. Design limit load test, the 1st and 2nd design ultimate load tests and fracture test were performed. Main AE source was detected by an sensor attached on skin near by front lug. Especially, at the 1st design ultimate test, strain and displacements results didn't show internal damage but AE signal presented a phenomenon that the internal damage was formed. At the fracture test, AE activities were very lively, and strain and displacements results showed a tendency that the load path was changed by severe damage. The internal damage initiation load and location were accurately evaluated during the static structural test using AE technique. It is certified from this paper that AE technique is useful technique for evaluation of internal damage at static structural strength test.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.11-21
• /
• 2008

The purpose of this study was to investigate the most optimum way of performing the bandal chagi during Taekwondo Kyorugi competition. By analyzing the EMG data and the kinematic data it was hoped that scientific data would be provided to instructors and players about the optimization of the Bandal Chagi. The results of the analysis are as follows: During competition while performing the Bandal Chagi the most important factors that affect the impact point are the range of motions of the upper body hyper extension and knee joints. Through the measurement of the muscles EMG activity of a well performed Bandal Chagi with the right leg it was observed that the left side erector spinae muscle was highly activated and so it was concluded that this muscle should be trained to improve the performance of the Bandal Chagi. Likewise it was observed that for the right side of the abdominal muscle's EMG there was a high activity level and thus showed that there was a large contribution of this muscle for the optimum performance of the Bandal Chagi.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.159-164
• /
• 2013

It is well known that a single moving camera video is capable of extracting the 3-dimensional position of an object. With this in mind, current research performed image-based monitoring to establish a floating structure model using a camcorder system. Following this, the present study extracted frame images from digital camcorder video clips and matched the interest points to obtain relative 3D coordinates for both regular and irregular wave conditions. Then, the researchers evaluated the transformation accuracy of the modified SURF-based matching and image-based displacement estimation of the floating structure model in regular wave condition. For the regular wave condition, the wave generator's setting value was 3.0 sec and the cycle of the image-based displacement result was 2.993 sec. Taking into account mechanical error, these values can be considered as very similar. In terms of visual inspection, the researchers observed the shape of a regular wave in the 3-dimensional and 1-dimensional figures through the projection on X Y Z axis. In conclusion, it was possible to calculate the displacement of a floating structure module in near real-time using an average digital camcorder with 30fps video.

• The Journal of Engineering Geology
• /
• v.20 no.4
• /
• pp.371-380
• /
• 2010

A three-dimensional finite element analysis was performed to predict the location of a fault zone ahead of a tunnel face based on convergence displacement. Geometrical models for the numerical analysis were developed based on the possible geometric intersection between the fault zone and the tunnel. Fifteen fault models were generated from combinations of faults with five different strikes (at $15^{\circ}$ intervals) and three dips (vertical, $45^{\circ}$ and $-45^{\circ}$) relative to the tunnel route. The displacements on the crown and side walls were calculated and analyzed using a vector orientation approach. As a result, nine representative prediction charts were developed, showing location and orientation of the fault zone based on convergence displacement.

• Journal of the Korean Geophysical Society
• /
• v.6 no.4
• /
• pp.277-294
• /
• 2003

Structures show the phenomena of deformation and lowering of function with time-lapse by artificial environments and changes of geotechnical conditions or accumulation of initial deformation elements. This study aims the structural assessment of cultural property, Chum-Sung-Dae, located in Kyeongjucity, Korea. It was built about 1,300 years ago, and has undergone deformation and ground-subsidence with time-lapse. Non-destructive evaluation techniques were applied to the Chum-Sung-Dae, to protect it from survey. Because of this reason, 3D precise laser scanning surveying system was applied to measure the exact size of Chum-Sung-Dae, displacement and declining angles. Geophysical exploration also was applied to study the subsurface distribution of geotechnical parameters or physical properties. Natural frequencies were measured from real and model of Chum-Sung-Dae to study the dynamic characteristics of vibration and/or earthquake load and stiffness of structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.1-6
• /
• 2019

One method for image recognition is template matching. In conventional template matching, the block matching algorithm (BMA) is performed while changing the two-dimensional translational displacement of the template within a given matching image. The template size and shape do not change during the BMA. Since only two-dimensional translational displacement is considered, the success rate decreases if the size and direction of the object do not match in the template and the matching image. In this paper, a variable is added to adjust the two-dimensional direction and size of the template, and the optimal value of the variable is automatically calculated in the block corresponding to each two-dimensional translational displacement. Using the calculated optimal value, the template is automatically transformed into an optimal template for each block. The matching error value of each block is then calculated based on the automatically deformed template. Therefore, a more stable result can be obtained for the difference in direction and size. For ease of use, this study focuses on designing the algorithm in a closed form that does not require additional information beyond the template image, such as distance information.