• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.6
• /
• pp.425-429
• /
• 2009

Recently, Chen et al.'s proposed mutual authentication scheme based on the quadratic resiidue, finding the squaring root problem, for avoiding exhaustive search on the server. But, if a malicious reader sends same random value, the tag is traced by an adversary. Moreover, there is realization problem because of its limited ability to compute squaring and hash function. In this paper, we analyze Chen et al.'s scheme and its weakness. Furthermore we present an improved mutual authentication scheme based on the quadratic residue which solves the tracing problem by generating random value on the tag and uses only squaring. We also make the scheme satisfy to forward secrecy without updating and synchronizing and avoid exhaustive search.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.353-357
• /
• 2011

An embedded two-axis solar tracking system was developed by using AVR micro controller for enhancing solar energy utilization. The system consists of an Atmega128 micro controller, two step motors, two step drive modules, CdS sensors, GPS module and other accessories needed for functional stability. This system is controlled by both an astronomical method and an optical method. Initial operation is performed by the result from the astronomical method, which is followed by the fine controlled operation using the signals from Cds sensors. The GPS sensor generates UTC, longitude and latitude data where the solar tracker is installed. A database of solar altitude, azimuth, and sunrise and sunset times is provided by UART (Universal Asynchronous Receiver/Transmitter).

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.108-115
• /
• 2015

Multilateration systems are used to provide the position of aircraft in flight or on airport runways. In the multilateration systems, the interrogator is an important transmitter that used to interrogate the airplanes with appropriately scenario in surveillance airspace. Whisper-Shout interrogation sequence, which is one of the key functions of the interrogator, can control airport traffic density when intruder airplanes are coming into the surveillance airspace. Therefore collision chance between airplanes could be reduced and also get highly accurate location of incoming airplane in multilateration systems. In this paper, we developed the interrogator that allows it to transmit Mode A/C and Mode S interrogations which is similar to existing secondary surveillance radar. With appropriately controlled Whisper-Shout sequence in the interrogator, the multilateration systems can avoid synchronous garbling and FRUIT phenomenons caused by receiving multiple responses from a number of airplanes.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.39-46
• /
• 2023

We present an efficient packet transmission strategy for massively multiplayer online first-person shooter (MMOFPS) games using movement-adaptive packet transmission interval. The player motion in FPS games shows a wide spectrum of movement variability both in speed and orientation, where there is room for reducing the number of packets to be transmitted to the server depending on the predictability of the character's movement. In this work, the degree of variability (nonlinearity) of the player movements is measured at every packet transmission to calculate the next transmission time, which implements the adaptive transmission frequency according to the amount of movement change. Server-side prediction with a few auxiliary heuristics is performed in concert with the incoming packets to ensure reliability for synchronizing the connected clients. The comparison of our method with the previous fixed-interval transmission scheme is presented by demonstrating them using a test game environment.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.919-925
• /
• 2023

Modern drones are equipped with miniaturized mission equipment capable of performing various tasks such as surveillance and reconnaissance. Consequently, these mission equipment are exposed to disturbances like wind loads and motor rotations, which can lead to instability in the operation of the Electro-Optical Targeting System (EOTS). Specifically, simple step inputs for changing the line of sight in EOTS can cause abrupt changes in speed, inducing overshoot and potentially creating instability along with other disturbances. To address this, a velocity profile was designed so that the angular velocity moves in a trapezoidal shape when changing the EOTS line of sight. A Double-loop controller was designed to apply this profile as an input to the external loop receiving position feedback. The system's stability was then compared, and the velocity profile was optimized within a stable range by varying maximum speed and acceleration.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2365-2372
• /
• 2011

The Cogging Torgue is non-uniform torgue in motor which causes noise and vibration to synchronous motors such as BLDC motor, and regardless of load current, is generated by the interaction between permanent magnet rotor and stator slot which is the force of tangential direction that tends to move into the position where the magnetic energy of motor system is minimal. such Cogging Torgue shall be considered in design stage since it is the main factor of motor's noise and vibration. Understanding that Cogging Torgue is generated by the interaction between relatively low stage harmonic flux density gab of permanent magnet rotor and steel slot of stator. This study proposes the method if reducing Cogging Torgue using response surface method which is a kind of design if experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.3
• /
• pp.267-274
• /
• 2004

In this paper, a new on-line dead-time compensation method is proposed. The output voltage errors due to the dead-time effect is considered as disturbance voltages. The magnitude of the disturbance voltages is estimated using a time delay control technique and the disturbance voltages are calculated using the estimated values, measured currents, and position information. The calculated disturbance voltages are fed to voltage references in order to compensate the dead-time effect. The proposed method is applied to a PM synchronous motor drive system and implemented in a digital manner using a digital signal processor (DSP) TMS320C31. The experiments are carried out for this system to show the effectiveness of the proposed method and the results show the validity of the proposed method.

• Water for future
• /
• v.20 no.2
• /
• pp.127-138
• /
• 1987

For determination of the design wave, a method of estimating the design wind speed at sea from the wind records at the nearby weather stations on land is proposed. Along the West Coast, the design wind speed are shown to have two main directions; namely, N through W, and WSW through S. Through the analysis of weather maps, fetches for the main wind directions along the West Coast are determined. The wind speeds at sea are found to have 0.8~0.9 times the wind speed at the stations on land for U$\geq$20m/s. The West Coast may be divided into three regions for which fetches are determind uniquely. Design waves with return period of 100 years are determined by the revised S.M..B. method along the West Coast, and show the deep water significant wave heights of 4.4~8.3 meters with wave periods of 8.9~12.0 seconds.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.6 s.109
• /
• pp.587-596
• /
• 2006

Recently a new spectrum ruling has been proposed for UWB(Ultra-Wideband) communication applications. The new proposal is expected to reduce the usable UWB spectrum significantly and may cause to weaken the unique advantages of the UWB pulses such as high resolution synchronizations and robustness to the multipath effects. In this paper, we investigate the performance degradation caused by the reduced UWB spectrum. As a means to overcome the performance degradation, a modified discrete linear frequency modulation technique is proposed. We show that, when multipath components are present in the received signal, the proposed method exhibits superior performances in terms of pulse detection efficiency and range resolutions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.88-94
• /
• 2005

This paper presents the design and implementation of a receiver operating between a rotary machine encoder and DSP. The receiver connects with the encoder using 1 bit serial data and DSP using 16 bits bus line. The receiver and encoder use the different operating frequency each other. We suggest a new apparatus and method of synchronized code for header detection in 1bit serial communication. The system operating frequency can be changed into 20MHz or 60MHz by using the external port such as 'clk_select'.