• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제30권8호
• /
• pp.141-147
• /
• 2002

Estimation of thrusters efficiency is a very important process at the end of lifetime of a satellite. This paper introduces a technique to estimate the efficiency change of thrusters considering bubble effect for Koreasat I. During APEMAC(Automatic Pitch Error/ Momentum Adjust Control), the change in thruster efficiency is estimated to compare the attitude telemetry data of the Koreasat I with the results of the control logic using Simulink. The outcome of this study is expected to contribute to improving the operational load at the end of generic communication satellite mission.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제19권1호
• /
• pp.50-60
• /
• 2015

A propulsion system of a satellite provides a necessary thrust to reach to the final orbit after a separation from a launch vehicle. Also, it supplies pulse moments to maintain the satellite in a mission orbit and for its attitude controls during a mission life time. The present study investigates the development trend of bipropellant rocket engines for an orbit transfer and an attitude control of a satellite using monomethylhydrazine and hydrazine for fuel and dinitrogen tetroxide for oxidizer to derive fundamental specifications which are necessary for domestic development researches. Also, their major performance characteristics are summarized.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제36권5호
• /
• pp.514-523
• /
• 2008

This paper presents a single-axis simulator developed to verify the attitude control algorithm of KAUSAT-2 satellite. Named KAUSatSIM, the simulator is composed of a single-axis rotation table using an air-bearing that simulates a frictionless environment, as well as sensors and momentum wheel that was used on KAUSAT-2. The simulator can be utilized for verification of KAUSAT-2 attitude control algorithm, development of new algorithms, and verification of performance. Tests were performed on the single-axis rotation simulator using the momentum wheel in order to verify the attitude control algorithm of KAUSAT-2. Satisfactory test results were obtained by designing a wheel controller that employs the proportional-derivative control method. In addition, a propulsion system was added and tested for development of a new satellite attitude control algorithm.

• Aerospace Engineering and Technology
• /
• 제12권2호
• /
• pp.14-23
• /
• 2013

Fault management design of the satellite describes preparations for failures which can occur during operational phase. Fault management design contains detection and isolation function of anomaly, and also it contains function to maintain the satellite in safe condition until the ground station finds out a cause of failure and takes a countermeasure. Unlike normal operation, safing operation is automatically performed by Power Control and Distribution Unit and Integrated Bus Management Unit which loads Flight Software without intervention of ground station. Since fault management operation is automatical, fault management logic and functionality of relevant hardware should be thoroughly checked during ground test phase, and error which is similar to actual should be carefully applied without damage. Verification test for fault management design is conducted for various subsystems of satellite. In this paper, we show the design process of fault management design verification test for Electrical Power Subsystem and Attitude and Orbit Control Subsystem of Low Earth Orbit satellite flight model and the test results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제48권2호
• /
• pp.147-158
• /
• 2020

In this paper, we will review the thruster based reaction wheel momentum dumping method for low Earth orbit satellite. Thruster based momentum dumping is widely used in GEO satellites by performing momentum dumping and attitude control using thrusters at the specific time. LEO satellite should perform momentum dumping at any time, thus it is not appropriate to use GEO satellite's momentum dumping method. In this research, we will review the method for LEO satellite, which perform momentum dumping always and use reaction wheels for attitude control during dumping. To reduce thruster's valve on and off counts, we propose to use the maximum pulse width for thruster operation. To prevent attitude error increase by thrusters, we adjust the thruster operation interval. Through simulation, we verify the proposed method's effects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제30권3호
• /
• pp.46-56
• /
• 2002

In this paper, the feasibility of the attitude control of a spacecraft using pulsed plasma thrusters(PPTs) is studied. The PPT consumes less propellant mass requied for the orbit management or attitude control owing to its high specific impulse characteristics, compared with traditional gas propulsion system. The PPT is expected to be highly adequete for the missions requiring long-duration operations because it has relatively long operation time and easy implementation. The feasibility of the PPT for attitude control of a small satellite system is addressed through realistic missions. The classical PD controller and a fuzzy logic controller are tested, and fuel saving fuzzy logic controller is then proposed for more flexible mission performance.

• Aerospace Engineering and Technology
• /
• 제13권2호
• /
• pp.18-28
• /
• 2014

We assume that two control moment gyros are installed for space qualification in a satellite with four reaction wheels, and study the high agile maneuver method. Using high torque control moment gyros, we reduce the satellite's attitude error. After that, we activate reaction wheels to control remaining attitude error. This proposed method can avoid singularity problem of control moment gyros, and do not require gimbals' angle to calculate torque command. Through numerical simulations, we show that our method's agile performance is similar to previous method and reduce the reaction wheels' required momentum.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제44권5호
• /
• pp.416-422
• /
• 2016

This paper presents preliminary performance analysis of a satellite formation flying testbed, which is under development by Astrodynamics and Control Laboratory, Department of Astronomy, Yonsei University. A model reference adaptive controller (MRAC) with a first-order reference model is chosen to enhance the response of reaction wheel system which is subject to uncertainties caused by unmodelled dynamics and measurement noise. In addition, an on-line parameter estimation (OPE) technique based on the least square is combined to eliminate the effect of angular measurement noise by estimating the moment of inertia. Both numerical simulations and hardware experiments with MRAC support the effectiveness and applicability of the adaptive control scheme, which maintains the tracking error below $0.25^{\circ}$ for the entire time span. However, the high frequency control input generated in hardware experiment strongly suggests design modifications to reduce the effect of deadzone.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (3)
• /
• pp.42-44
• /
• 1998

위성 시스템은 전력 분배, 자세 제어, 열 제어 및 임무 수행에 필요한 탑재체 지원과지상과의 명령 수신 및 측정데이터의 수집을 위해서 프로세서를 내장하고 있다. 임무 수행 및 시스템의 복잡성 여부에 따라서 하나의 프로세서만을 탑재하기도 하지만 여러 개의 프로세서를 탑재하여 기능에 적합하게 분배하여 운용하기도 한다. 아리랑위성은 3개의 프로세서사 탑재되며, 크게 나누어 원격 측정 명령계, 자세 제어계 그리고 전력계에 기능을 담당하게 된다. 하나 이상의 프로세서를 탑재하게 되면 프로세서간의 동기화가 요구되며 프로세서간의 정보 전달을 위해서 통신 채널이 필요하게 된다. 실제로 프로세서간의 동기화는 상호 통신에 있어서 기준 점을 제공하므로 매우 중요한 의미를 가진다. 본 논문에서는 아리랑위성의 동기화는 어떤 방식으로 설계되었으며, 어떻게 운영되는지에 대해 설명한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제33권9호
• /
• pp.73-80
• /
• 2005

This paper addresses a newly proposed start-up method of the HAUSAT-2 momentum wheel. The HAUSAT-2 is a 25kg class nanosatellite which is stabilized to earth pointing by 3-axis active control method. A momentum wheel performs two functions. It provides a pitch-axis momentum bias while measuring satellite pitch and roll attitude. Pitch control is accomplished in the conventional way by driving a momentum wheel in response to pitch attitude errors. Precession control and nutation damping are provided by driving the pitch axis magnetic torquer. A momentum wheel is nominally spinning at a particular rate and changes speed. This simulation study investigates the feasibility and performance of a proposed strategy for starting-up the wheel. A proposed strategy to start-up the wheel shows that a pitch momentum wheel can be successfully started-up to its nominal speed from rest and be stabilized to nadir pointing.