• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.415-419
• /
• 2018

This paper predicts and measures the C/N ratio of a beacon signal transmitted from geostationary orbit satellite KorSat 5A ($113^{\circ}E$) at a ground station located in Kimpo. Based on the ground stations, we compared the rain attenuation of the zone K of ITU-R and the rain attenuation which analyzed the domestic weather information. In ITU-R, the Korean rainfall characteristics are classified into zone K, but forecasting the rainfall intensity and attenuation of three adjacent cities based on the cumulative rainfall data per minute from 2013 to 2017. The calculation of rainfall path and attenuation is based on ITU-R recommendations. The change of the C/N according to the rainfall amount was confirmed through the 2 week satellite beacon signal C/N measurement. The predicted critical C/N was decreased to 12 dB at $A_{0.3}$. During the experiment, it was confirmed that it decreased up to 8 dB according to the concentrated rainfall.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.4
• /
• pp.403-414
• /
• 1997

The distribution of the space debris caused by any source affects the DBS & FSS wave propagation for satellite communication. In this paper, the normalized expansion coefficients are evaluated with varying the volume distribution density of space debris and the operating frequency, and then the attenuation and phase shift are calculated by using the normalized expansion coefficients. Conclusively, the attenuation and phase shift are mostly affected with the real and imaginary part of the amplitude function, respectively, which represented by electric field component of the Bessel function. The results of this paper adapted for the design of the link budget for satellite communication system and the reconsideration of space environment as the space debris increses by geometric progression.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.782-793
• /
• 2000

This paper presents a simple dynamical prediction scheme of the signal level which is attenuated and varied due to rain fading in satellite communication links using above 10GHz frequency bands. The proposed prediction scheme has four functional blocks for discrete-time low-pass filtering, slope-based prediction, mean-error correction and hybrid fixed/variable prediction margin allocation. Through simulations using Ka-band attenuation data obtained from the data measured over Ku-band by frequency-scaling, it is shown that the slope-based prediction with the mean-error correction has as small standard deviation of prediction error as below 1 dB, and that the error is about 1.5 to 2.5 times as small as that without the mean-error correction. The hybrid prediction margin allocation requires smaller average margin than those of both fixed and variable methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.909-916
• /
• 2016

The beacon receiver is an equipment which detects and measures the signal strength of transmitting satellite beacon signal. Beacon signals transmitted by satellites are low power continuous wave(CW) signals without any modulation intended for antenna steering to satellite direction and power control purposes on the earth. The beacon signal detection method using a very narrow band analog filter and RSSI(Received Signal Strength Intensity) has been typically used. However, it requires the implementation to track the frequency at the beacon receiver, thus a beacon frequency variation of the satellite due to temperature changes and long-term operation. Therefore, in this paper, the beacon signal detection receiver is designed by using a very narrow band digital filter array for a faster acquisition and SNR(Signal to Noise Ratio) method detection. For this purpose, by calculating the satellite link budget with the rain attenuation between satellite and ground station, and then extracting the received $C/N_o$ of the beacon signal, this work derives the bandwidth and the array number of the configured digital filter that gives the required C/N.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.59-64
• /
• 2020

Occasionally, MODEM test in satellite communication systems are needed. But Rx terminals in satellite communications are designed to obtain high SNR generally, therefore artificial bad conditions and environments are demanded for the test. One of the typical method is satellite output power reduction. Using noise generator can be another method. However, these costs a lot of money, time, and procedures in reality. In order to overcome these problems, this paper proposes an artificial noise generation method for MODEM test in satellite communication systems. First of all, SNR of a general heterodyne Rx terminal is calculated. Based on the calculation, a new model which is including variable attenuator is proposed to increase noise level. Simulation results illustrate the variable attenuator can control SNR, and these show that MODEM test in satellite communication systems be possible.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.21-29
• /
• 1989

Using Fresnel diffraction theory a formula is drived for signal intensity variation caused by finite strip obstacles. Signal intensity according to parameter variation of the obstacle is theoretically calculated by a computer and compared with experimental results. For the experiment, an acryl board 3 mm thick was used on which a special material was painted to prevent some reflections and transmissions of the incident wave. 10-element Yagi antennas were used for transmitting and receiving antenna and the frequency was 820 MHz. Finally a tree model was made as a combination of many different finite strip obstacles. Signal attenuation calculated from numerical analysis agree reasonably with experimental data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.267-272
• /
• 2017

In this paper, we suggested that a RF-front module of down-converter that represents the lowest noise figure to receive high quality video signals because the attenuation occurs in the atmosphere over 20GHz. By budget analysis of CDR, SFDR and CIP3 of RF-FEM, we also analyzed the parameters and linearity that presents high dynamic range. The total gain of designed Ka-band down-converter is 61.8dBand noise figure is 1.05dB, so gain and noise figures show excellent properties. In the future, the designed RF-FEM will be applied to the Ka-band satellite down-converter for UHD-class video transmission.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.34-37
• /
• 1998

Signal Attenuation in the design of satellite channel is due mostly to rain. In this paper, the rain rate characteristics based on the recent year(1994-1996) data for Changwon-Masan were approximated to Moupfouma distribution, and the parameters of distribution were calculated from a simple conversion method of 1-h rate to 1-min rain rate data. From rain rate characteristics, the rain attenuation was estimated and compared with CCR model, Global model and SAM model.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.244-244
• /
• 2004

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.18-27
• /
• 2000

Signal attenuation of Ka-band satellite communication system due to rain fading is more severe than those of conventional frequency band system, thus an efficient rain fade countermeasure technique is absolutely required. In this paper, we design an improved adaptive modulation system, which switches the modulation mode according to the channel condition, and propose the novel synchronization algorithms. We assume that the modulation scheme is M-ary PSK and the receiver is TDMA burst mode. And the transponder model is the same with KOREASAT-3. By using the adaptive modulation scheme, we satisfy the BER and mean spectral efficiency requirements, simultaneously, which is impossible by using the fixed modulation scheme.