• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1099-1106
• /
• 2018

In this paper, we developed and then analyzed the specifications of the frequency synthesizer which was applied to long range MFR (Multi-function Radar). These specifications were able to guarantee the functions and performance of MFR. MFR was the radar system that used phase array for electronically scanning. This frequency synthesizer made various frequency signals including to STALO (Stable Local Oscillator) for MFR. By analyzing the MFR requirements, we choose the optimal frequency synthesis method and then we got the best performance and functionality including to physical size for this system. We designed and fabricated DDS (Direct Digital Synthesizer)-driven Offset-PLL (Phase Locked Loop) synthesizer to meet the requirements which were low phase noise, fast switching time and low spurious. This synthesizer had less than -131dBc/Hz@100kHz phase noise and less than $4.1{\mu}s$ switching time, respectively.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.661-666
• /
• 2009

Modular snake-like robots, which consist of series of modules, are robust for failure and have flexible locomotions for environment. However, they are difficult to control and few efficient and various locomotions are introduced yet. In this paper, GA based phase generation and trajectory generation approaches are implemented and compared for locomotion of snake-like robots and extended for analysis for selections of partial modules. In addition, modeling and simulation environments are implemented in Webots simulator and above GA based experiments for locomotion are executed for KMC snake-like robot.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.3
• /
• pp.55-61
• /
• 1999

In this study, we have constructed the acoustic microscope using quadrature technique and analyzed the relative variation of image intensity and the quality of image by reconstructing the amplitude and phase image for surface defects with tiny hight variation. In this experiment, we have constructed the scanning acoustic microscope using the focused transducer with 3㎒ center frequency and the quadrature detector. And we have fabricated aluminum samples with round defects whose depth is different and reconstructed the amplitude and phase images for the samples. One sample has round defects with 2㎜ diameter and 100㎛ depth and the other has round defects with 4㎜ diameter and 5㎜ depth. In the result of line scanning for the sample with 100㎛ round defects, it has been shown that the variation rate of amplitude image intensity is 7% and the variation rate of phase image intensity is 89%. The phase image has better contrast than amplitude image for the sample. In contrast to this, the amplitude image has better contrast than phase image for the sample with 5㎜ depth's defects. Accordingly there is big difference between amplitude image and phase image for depth variation of defects whose boundary is 1 wavelength. Consequently the acoustic microscope using quadrature detector can be evaluated efficiently more than using envelope detector, for detecting defects which have height variation less than 1 wavelength. And also the phase image and the amplitude image can be used for detecting defects of tiny height variation with complimentary relation.

• Korean Journal of Optics and Photonics
• /
• v.27 no.3
• /
• pp.101-105
• /
• 2016

In this study we propose the novel optimization method of the phase-only computer-generated hologram (CGH), to improve calculation speed compared to the conventional method. While the conventional method is calculated using numerical analysis, the novel method is calculated using the phase-shift characteristic of Fourier transformation. In addition, the selectivity of noise filtering lets it decrease the calculation time. The validity of the reconstructed image using the novel method is verified by comparing simulation results to ideal and conventional data, and the improvement of texture and sharpness of the reconstructed image is confirmed by simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.182-190
• /
• 2011

A amplitude modulation(AM) range measuring system utilizes the phase difference of the modulated envelope of the reflected signal to measure the distance. It is known that the AM system has a problem in accuracy due to antenna leakage signals and spurious reflection signals, but an AM range measurement system using an active reflector, which shifts the frequency bands, has been proposed in order to minimize the measurement errors due to spurious signals. In this paper, a new phase measurement module for the AM range measurement system, which enables to measure long distance with good accuracy, is proposed. The modulation frequency is alternatively selected between 8 and 1 MHz, and the measured distance range with this module is up to 150 m within 2 cm accuracy. A JK flip-flop circuit is used for higher phase accuracy, and an XOR circuit is used to cover long distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.1
• /
• pp.37-45
• /
• 1982

We have analyzed the effect of multipath cochannel interference and Gaussian noise on binary DPSK systems used in land mobile radio communications. Considering multipath channel as non-selective Rayleigh channel, we have found a gnenral equation for bit error rates (BER) deriving the probability density function (p.d.f) of output of phase detector. The numerical results are shown in graphs and discussed as functions of carrier to noise power ratio (CNR), carrier to interferer power ratio (CIR) and correlation of signal component over the pulse length.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.2
• /
• pp.61-71
• /
• 2004

Transorthogonal 코드를 블록 단위로 확장해서 얻은 코드 집합을 적절하게 부집합으로 나누고 부호화기의 코드집합으로 할당한다. 이러한 부초화기를 병렬로 구성하고 정보 비트에 의해 선택된 부호화기의 각 출력 코드들을 합산하여 전송하는 다중코드 transorthogonal 변조 방식이 제안되어 있다. 본 논문에서는 다중코드 transorthogonal 변조 시스템의 부호화기로부터의 각 출력 코드를 또 다른 정보 비트로 이진 위상 변조한 후 합산하여 전송하는 시스템을 제안한다. 다중코드 transorthogonal 변조 시스템에서 적용된 정 진폭 부호화 알고리즘과정 전폭 부호화에 사용된 잉여비트를 이용한 수신 에러 정정 알고리즘을 제안된 시스템에 수정 없이 적용할 수 있으며 다중코드 transorthogonal 변조 방식에 비해 대역폭 효율이 개선됨을 보인다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.8-17
• /
• 1999

In this paper, a proposal for improving the performance of IF in-phase combiner is presented in view of simple hardware design and good performance for space diversity application. By adding the stable normalization circuit to the phase detector, better performances are obtained even for a severe notch depth of 30 dB. To check the validity of this proposal, various results based upon numerical simulation and laboratory test are presented here in conjunction with 64-QAM digital radio relay system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.902-911
• /
• 2002

A wireless ad-hoc network is a collection of wireless mobile hosts forming a temporary network without the aid of any centralized adminstration or standard support services. Wireless ad-hoc networks may be quite useful in that they can be instantly deployable and resilient to change. In this environment, for many crucial distributed applications, it is necessary to design robust virtual infrastructures that are fault-tolerant, self-stabilized, and resource-efficient. For this task this paper proposes a scheme of maintaining robust spanning trees which are little affected by topological changes. By maintaining such a spanning tree and adapting it to the environments with frequent topological changes, one can improve the reliability and efficiency of many applications that use the spanning tree.

• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.251-267
• /
• 2008

In this paper, we present a distributed topology control algorithm for constructing an optimized topology having a minimal search-time in unstructured peer-to-peer network. According to the proposed algorithm, each node selects the best nodes having higher hit-ratio than other nodes as many as the number being exponentially proportional to the hit-ratio of the node itself, and then it connects to them. The ensemble behavior of the proposed algorithm is very similar to the recrystrallizing phenomenon that is observed in nature. There is a partial order relationship among the hit-ratios of most nodes of constructed topology. Therefore once query message visits a node, it has a higher hit-ratio than the node that was visited last by the message. The query message even sent from freeloader can escape to the node having high hit-ratio by one hop forwarding, and it never revisits any freeloader again. Thus the search can be completed within a limited search time. We also propose the Chain-reactive search scheme using the constructed topology. Such a controlled multicasting reduces the query messages by 43 percent compared to that of the naive Gnutella using broadcasting, while it saves the search time by 94 percent. The search success rate of the proposed scheme is 99 percent.