• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.96-101
• /
• 2000

SAR(Synthetic Aperture Radar) interferometry 기술은 co-registration, 정밀궤도 계산, phase unwrapping, 지형보정과 같은 기술로 구성되어있다. 구속화된 위상값을 절대 위상값으로 변환하는 과정인 phase unwrapping 기술은 정밀지형고도를 얻는데 있어서 핵심기술이다. 본 연구에서는 JERS-1 SAR 영상으로부터 interferogram을 구하고, 이로부터 추출된 위상정보를 이용하여 branch cut(Goldstein et. al, 1988), minimum discontinuity(Flynn, 1997) 그리고 minimum $L^p$-norm(Ghiglia and Romero, 1996)방법 적용결과에 대한 비교 분석을 실시하였다. Goldstein 알고리즘은 수행속동가 매우 빠르지만 residue를 연결한 branch cut에 의해 분활된 영역 내에서, 서로 다른 적분 경로로 인해 위상이 단절되었다. 영상내의 모든 화소에서 절대 위상을 구한 minimum discontinuity와 minimum $L^p$-norm 알고리즘 수행 결과는 상관관계가 0.995로 매우 유사하였는데, 가중된 불연속선의 합을 최소화하는 minimum discontinuity 알고리즘이 minimum $L^p$-norm에 비해 영상 일부 지역에서 발생하는 위상 오차를 전파시키지 않는다는 장점이 있다. Minimum $L^p$-norm 방법은 다른 두 방법과 달리 위상정보 내에 많은 잡음이 있더라도 적절한 해를 구할 수 있다는 장점이 있다. 각 방법은 대상 자료의 특성에 따라 효율성이 있으나 Flynn의 알고리즘이 지역적 특성과 무관하게 가장 효과적임을 알 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.247-258
• /
• 2020

In this paper, based on a stochastic parallel gradient descent (SPGD) algorithm we study phase control of a coherent-beam-combining system under turbulent atmospheric conditions. Based on the statistical theory of atmospheric turbulence, we carry out the analysis of the phase and wavefront distortion of a laser beam propagating through a turbulent atmospheric medium. We also conduct numerical simulations of a coherent-beam-combining system with 7- and 19-channel laser beams distorted by atmospheric turbulence. Through numerical simulations, we characterize the phase-control characteristics and efficiency of the coherent-beam-combining system under various degrees of atmospheric turbulence. It is verified that the SPGD algorithm is capable of realizing 7-channel coherent beam combining with a beam-combining efficiency of more than 90%, even under the turbulent atmospheric conditions up to cn2 of 10-13 m-2/3. In the case of 19-channel coherent beam combining, it is shown that the same turbulent atmospheric conditions result in a drastic reduction of the beam-combining efficiency down to 60%, due to the elevated impact of the corresponding refractive-index inhomogeneity. In addition, by putting together the number of iterations of the SPGD algorithm required for phase locking under atmospheric turbulence and the time intervals of atmospheric phenomena, which typically are of the order of ㎲, it is estimated that hundreds of MHz to a few GHz of computing bandwidth of SPGD-based phase control may be required for a coherent-beam-combining system to confront such turbulent atmospheric conditions. We expect the results of this paper to be useful for quantitatively analyzing and predicting the effects of atmospheric turbulence on the SPGD-based phase-control performance of a coherent-beam-combining system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.40-45
• /
• 2013

The purpose of this study was to detect the pin hole defect of dental composite restoration using lock-in thermography method. Amplitude and phase images of the composite resin specimens were analyzed according to the lock-in frequency and the diameter of defect area. Through the amplitude image analysis, at lock-in frequency of 0.05 Hz, defect diameters 2-5 mm exhibited the highest amplitude contrast value between defective area and sound area. The lock-in frequency range of 0.3-0.5 Hz provided good phase angle contrast for the defect area. At lock-in frequency range of 0.5 Hz, defect diameter of 5 mm exhibited the highest phase contrast value. It is concluded that the infrared lock-in thermography method verified the effectiveness for detecting the pin hole defect of dental composite restoration.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.430-431
• /
• 2018

DC-DC 위상천이 풀브릿지 컨버터는 경부하 운용시에 영전압 스위칭이 발생하지 않아 큰 스위칭손실이 발생한다. 경부하에서 위상천이 풀브릿지 컨버터의 낮은 효율을 개선하기 위해 DCM (Discontinuous Conduction Mode) 동작을 이용한다. 본 논문은 경부하에서 위상천이 컨버터의 DCM과 CCM (Continuous Conduction Mode) 동작의 특성 및 도통 손실 절감을 위한 동기 정류기의 제어 방법을 이론적으로 분석하고, 시뮬레이션을 통해 검증하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2365-2373
• /
• 2012

To obtain Korea AS-level internet topology, we used three data sources, which include BGP data of UCLA IRL, IRR and IXP data. Using Internet topology generator models(Waxman, BA and GLP), we developed three graphs that have same number of nodes as Korea AS-level Internet. Then we compared each graph with the Korea AS-level Internet topology. Through this study we could find that the existing Internet topology generators can't simulate Korea AS-level internet.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.679-681
• /
• 2014

The performance of M-ary APSK modulation system due to phase noise are analyzed in this paper. The effects for phase noise in the higher order modulation are simulated by using constellation of the higher order modulation signals. the simulated results are verified by comparing with the analytic results for lower order PSK modulation signals. Based on the evaluation of simulation method, the phase noise effects for higher order APSK modulation signals are suggested in this paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.280-286
• /
• 2007

In this paper, the phase noise effects of OFDM transceiver diversity systems were analyzed. Since OFDM communication system is very sensitive to phase noise, the system performance may degrade seriously due to the increase of subcarrier interferences and system noise. Therefore, the phase noise model was suggested and its distribution and power were varied to investigate the effects of phase noise on the system performance. The degree of the system performance degradation depends on the specific diversity structures of transceiver systems. Here, the performances of OFDM systems with two antennas transceiver diversity were analyzed and compared with that of systems with only transmission diversity and without diversity as the phase noise characteristics varied.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.184-190
• /
• 2013

Parametric stereo(PS) audio coding is a specific version of spatial audio coding. In this paper, the problem due to the conventional synthesis of phase differences. In the conventional upmix matrix, phase differences are synthesized not only on downmix signal but also ambient signal, which violates the assumption that the ambient signals are anti-phased. Deterioration due to the phase synthesis is analyzed, especially, for low interchannel correlation. To solve this problem, new upmix matrix is proposed, which synthesizes phase differences only on downmix signal. The performance of the proposed upmix matrix is verified by the subjective listening tests.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.299-310
• /
• 2003

In the evaluation of the subgrade stiffness structure by the SASW method, the calculation of the phase velocities is the important task controlling the reliability of the result. The interpretation of the phase spectrum should precede the phase-velocity calculation in the current practice of the SASW method. The difficulty involved in the interpretation prohibited the SASW method from being spread over to the industry. This study proposed a new method called the frequency-wave number technique, which is based on the frequency-wave number relationship of the surface wave in the multi-layered system. The frequency-wave number technique eliminates the expertise in the interpretation of the phase spectrum, automates the phase-velocity calculation and expedites the determination of the phase-velocity dispersion curve. To verify the validity of the proposed frequency-wave number method, the transfer function determined from the numerical simulation of the SASW measurements was used fir the calculation of the automatic calculation of the phase velocities and compared with the phase velocities by WinSASW employing the phase-unwrapping method. Also, the proposed method was applied to the real SASW measurements performed at$\bigcirc$$\bigcirc$area in GyeongGi-Do to see how the proposed method works with the real measurements.

• Progress in Medical Physics
• /
• v.3 no.2
• /
• pp.43-57
• /
• 1992

Phase detector techique provides a unique probe to membrane recycling phenomenon by enabling dynamic monitoring of cell membrane capacitance. However, it has inherent errors due to constant changes in measurement environments. The present study analyzed several error sources to develope application criteria of this technique. and the following was found based on a theoretical analysis. The initial phase angle has to be appropriately selected to minimize the error due to perturbation of access and membrane conductances. Excitation frequency is also important to determine the initial phase angle. However. deviation of the phase angle from a predetermined initial value during the measurement period does not affect capacitance estimation to a significant degree. Despite an appropriate initial phase selection an error in scaling factor is expected for a large increase in capacitance during exocytosis. which may be overcome by iteratively correcting the scaling factor over the measurement period. These results will provide a useful guideline in practical application of this technique.