• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.699-705
• /
• 2001

It is considered DPSK modulation and the channel is modeled as multipath Nakagami fading type which has been recently taken as a general model in the communication environments in this paper. Most paper assumed that Nakagami fading index(m) of each branch of Rake receiver was fixed the same value in recent years. However, Nakagami fading index(m) of each branch of Rake receiver takes several value through communication environments. In this case, the branch ,which takes a small Nakagami fading index(m), exclude. So we can improve performance. We are considered phase error and analyzed wideband DS/CDMA cellular system. When nakagami fading index(m) takes voluntary value, we analyze BER of wideband DS/CDMA cellular system. Finally, When the branch, which takes a small Nakagami fading index(m), exclude, we analyze BER of wideband DS/CDMA cellular system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.443-448
• /
• 2022

This paper presents a subband affine projection algorithm with variable step size to improve convergence performance in adaptive filtering applications with long adaptive filters and highly correlated input signals. The proposed algorithm can obtain fast convergence speed and small steady-state error by using different step sizes for each adaptive sub-filter in the subband structure to which polyphase decomposition and noble identity are applied. The step size derived to minimize the mean square error of the adaptive filter at each update time shows better convergence performance than the existing algorithm using a variable step size. In order to confirm the convergence performance of the proposed algorithm, which is superior to the existing algorithm, computer simulations are performed for mean square deviation(MSD) for AR(1) and AR(2) colored input signals considering the system identification model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.623-628
• /
• 2013

The retrodirective array antenna system is operated faster than existing techniques of beamforming due to its less complexity. Therefore, it is effective for beam tracking in the environment of fast vehicle. On the other hand, it also has difficulty in estimating AOA according to multipath environment or multiuser signals. To improve the certainty of estimating AOA), this article proposes hybrid digital retrodirective array antenna systme combined with MUSIC algorithm. In this paper, the digital retrodirective array antenna system is designed according to the number of antenna array by using only one digital PLL which finds angle of delayed phase. And we evaluate the performance of the digital retrodirective array antenna for the high speed tracking application. Performance is studied by simulink when the speed of mobile is 300km/h and the distance between transmitter and receiver is 100m and then we have to confirm the performance of the system in multi path environment. As a result, the mean of AOA (Angle Of Arrival) error is $4.2^{\circ}$ when SNR is 10dB and it is $1.3^{\circ}$ when SNR is 20dB. Consequently, the digital RDA shows very good performance for high speed tracking due to the simple calculation and realization.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.28-35
• /
• 2006

Statistical models of shape variability based on active shape models (ASMs) have been successfully utilized to perform segmentation and recognition tasks in two-dimensional (2D) images. Three-dimensional (3D) model-based approaches are more promising than 2D approaches since they can bring in more realistic shape constraints for recognizing and delineating the object boundary. For 3D model-based approaches, however, building the 3D shape model from a training set of segmented instances of an object is a major challenge and currently it remains an open problem in building the 3D shape model, one essential step is to generate a point distribution model (PDM). Corresponding landmarks must be selected in all1 training shapes for generating PDM, and manual determination of landmark correspondences is very time-consuming, tedious, and error-prone. In this paper, we propose a novel automatic method for generating 3D statistical shape models. Given a set of training 3D shapes, we generate a 3D model by 1) building the mean shape fro]n the distance transform of the training shapes, 2) utilizing a tetrahedron method for automatically selecting landmarks on the mean shape, and 3) subsequently propagating these landmarks to each training shape via a distance labeling method. In this paper, we investigate the accuracy and compactness of the 3D model for the human liver built from 50 segmented individual CT data sets. The proposed method is very general without such assumptions and can be applied to other data sets.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.261-271
• /
• 2000

The present study investigated flow dynamics of a two-dimensional abdominal aortic bifurcation model under sinusoidal flow conditions considering wall motion. impedance phase angle(time delay between pressure and flow waveforms), and non-Newtonian fluid using computational fluid dynamics. The wall shear stress showed large variations in the bifurcated region and the wall motion reduced amplitude of wall shear stress significantly. As the impedance phase angle was changed to more negative values, the mean wall shear stress (time-averaged) decreased while the amplitude (oscillatory) of wall shear stress increased. At the curvature site on the outer wall where the mean wall shear stress approached zero. influence of the phase angle was relatively large. The mean wall shear stress decreased by $50\%$ in the $-90^{\circ}$ phase angle (flow wave advanced pressure wave by a quarter period) compared to the $0^{\circ}$ phase angle while the amplitude of wall shear stress increased by $15\%$. Therefore, hypertensive patients who tend to have large negative phase angles become more vulnerable to atherosclerosis according to the low and oscillatory shear stress theory because of the reduced mean and the increased oscillatory wall shear stresses. Non-Newtonian characteristics of fluid substantially increased the mean wall shear stress resulting in a less vulnerable state to atherosclerosis.

• Economic and Environmental Geology
• /
• v.31 no.2
• /
• pp.127-139
• /
• 1998

A new technique of simultaneous inversion for 3-D seismic velocity structure by using direct, reflected, and refracted waves is applied to the southeast part of the Korean Peninsula including Pohang Basin, Kyongsang Basin and Ryongnam Massif. Pg, Sg, PmP, SmS, Pn, and Sn arrival times of 44 events with 554 seismic rays are inverted for locations and crustal structure. $6{\times}6$ with $0.5^{\circ}$ and 8 layers (4 km each layer) model was inverted. 3-D seismic crustal velocity tomography including eight sections from surface to Moho, ten profiles along latitude and longitude are analyzed. The results are as follows: 1) the average velocity and thickness of sediment are 5.04 km/s and 3-4 km, and the velocity of basement is 6.11 km/s. The shape of velocity in shallower layer is agreement with Bouguer gravity anomaly (Cho et al., 1997). 2) the velocities fluctuate strongly in the upper crust. The velocity distribution of the lower crust under Conrad appears basically horizontal. 3) the average depth of Moho is 30.4 km, and velocity is 8.01 km/s. 4) from the velocity and depth of the sediment, the thickness, velocity and form of the upper crust, and the depth and form of Moho, we can find the obvious differences among Ryongnam Massif, Kyongsang Basin and Pohang Basin. 5) the deep faults (a Ulsan series faults) near Kyongju and Pohang areas can be found to be normal and/or thrust faults with detachment extended to the bottom of the upper crust.

• Economic and Environmental Geology
• /
• v.31 no.3
• /
• pp.235-247
• /
• 1998

A new technique of simultaneons inversion for 3-D seismic velocity structure by using direct, reflected, and refracted waves is applied to the center of the Korean Peninsula including Pyongnam Basin, Kyonggi Massif, Okchon Fold Zone, Taebaeksan Fold Zone, Ryongnam Massif and Kyongsang Basin. Pg, Sg, PmP, SmS, Pn, and Sn arrival times of 32 events with 404 seismic rays are inverted for locations and crustal structure. 5 ($1^{\circ}$ along the latitude)${\times}6$ ($0.5^{\circ}$ along the longitude) ${\times}8$ block (4 km each layer) model was inverted. 3-D seismic crustal velocity tomography including eight sections from the surface to the Moho, eight profiles along latitude and longitude and the Moho depth distribution was determined. The results are as follows: (1) the average velocity and thickness of sediment are 5.15 km/sec and 3-4 km, and the velocity of basement is 6.12 km/sec. (2) the velocities fluctuate strongly in the upper crust, and the velocity distribution of the lower crust under Conrad appears basically horizontal. (3) the average depth of Moho is 29.8 km and velocity is 7.97 km/sec. (4) from the sedimentary depth and velocity, basement thickness and velocity, form of the upper crust, the Moho depth and form of the remarkable crustal velocity differences among Pyongnam Basin, Kyonggi Massif, Okchon Zone, Ryongnam Massif and Kyongsang Basin can be found. (5) The different crustal features of ocean and continent crust are obvious. (6) Some deep index of the Chugaryong Rift Zone can be located from the cross section profiles. (7) We note that there are big anisotropy bodies near north of Seoul and Hongsung in the upper crust, implying that they may be related to the Chugaryong Rift Zone and deep fault systems.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.130-134
• /
• 2006

본 연구의 목적은 하천 복원과 관리에 필수적인 하천의 특성 분석 및 물순환 분석시스템 구축에 있다. 연구 대상지역으로 최근 하천의 생태 기능 회복을 위해 도심생태하천조성 사업이 추진되고 있는 대전 3대 하천유역을 선정하였다. 대전 3대 하천 유역의 물수지와 도시화에 따른 영향을 파악하기 위하여 SWAT을 이용한 물순환 분석시스템을 구축하였다. 모형적용 결과, 유출량과 지하수 수위 변화 등 대전 3대 하천 유역의 특성을 관측치에 가깝게 모의할 수 있었다. 모델의 검보정 실시결과에서 나타난 모델의 계산 값들의 관측된 유출량뿐 아니라 기저유출량 및 지하수 수위와의 높은 상관관계는 본 연구에서 구축한 모델의 구조나 변수의 유효성에 많은 신뢰도를 제공한다고 판단된다. SWAT을 이용하여 대전 3대 하천 유역의 물수지 분석 및 도시화에 따른 영향을 평가하였다. 물수지 분석결과에 의하면, 전체적으로 총 유출량 중 지하수 유출량이 47%정도, 중간 유출량이 31% 그리고 지표유출량이 22%이다. 각 소유역의별 유출 성분 분석결과는 각 소유역의 토지 이용도, 토양 그리고 지형적 특징에 따른 유출 특성을 확인하였다. 도시화 영향 분석 결과 전체적으로 1975년에서 2000년까지 갑천 유역의 약 5%가량의 도시화는 총 유출량의 변화에 있어서는 현저한 차이를 보이지 않았으나, 각 유출 성분의 경우에는 많은 영향이 있는 것으로 나타났다. 특히 지표유출량은 45% 가량의 증가를 보였고, 전체 유역의 지하수함양 량이 5%정도 감소한 반면, 도시화가 31%정도 진행된 소유역의 경우에는 17%정도의 현저한 감소를 나타냈다. 본 연구에서 수행한 물수지 분석 및 도시화 영향분석 결과는 향후 대천 3대 하천의 생태하천복원을 위한 물순환 정상화 대책마련 및 하천의 유량확보방안 마련에 기초자료를 제공할 수 있을 것이다.득증대를 꾀함으로 농촌문제 해결에 도움이 될 것으로 기대된다. 본 연구를 통해 GIS 와 RS의 기술이 농촌분야에 더 효율적으로 적용될 것으로 기대되며, 농업기술센터를 통한 정보제공을 함으로써 대농민 서비스 및 농업기관의 위상이 제고 될 것으로 기대된다.여 전자파의 공간적인 가시화를 수행할 수 있었다. 본 전자파 시뮬레이션 기법이 실무에 이용될 경우, 일반인이 전자파의 분포에 대한 전문지식을 습득할 필요 없이, 검색하고자 하는 지역과 송전선, 전철 등 각종 전자파의 발생 공간 객체를 선택하여 실생활과 관련된 전자파 정보에 예측할 수 있어, 대민 환경정보 서비스 질의 개선측면에서 획기적인 계기를 마련할 것으로 사료된다.acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전

• Journal of the Korean earth science society
• /
• v.38 no.6
• /
• pp.405-420
• /
• 2017

We investigated the H I, He II and O III emission lines of the symbiotic star AG Peg, using the spectroscopic data secured at different phases in three periods at the Lick Observatory. We measured FWHM and the intensity of six O III Bowen lines and studied the efficiency of fluorescence mechanism. The mean FWHM of O III normal and Bowen lines observed during three time periods did not make much difference, while Bowen line intensities are about 4.0 times higher than the normal lines. Comparing the predicted and the observed ratios, we found that the observed intensities are higher than predicted intensities, except for O III ${\lambda}$ 3759.87. The O III ${\lambda}$ 3791.26 and 3754.67 intensity ratios observed only in 2001 are in good agreement with the predictions by Saraph and Seaton (1980). We obtained the Bowen efficiency parameter (R)=0.47 for 2002, but we could not find R for the other two periods of time. Because of this, based on the 2002 efficiency result, we calculated the intensity ratio of O III normal and Bowen lines relative to He II ${\lambda}$ 4685.68 and derive the efficiency variation with time period. The result showed that the efficiency is the highest in 1998 and the lowest in 2001. We conclude that the efficiencies with phase are caused by the electron temperature changes in the ionized gas. The efficiencies of AG Peg are likely to increase along with electron temperature. Our analysis results may be useful in understanding the physical conditions of the ionized shell in symbiotic star and the intensity ratio and efficiency variation.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.8-15
• /
• 2020

In this paper, we propose a frame synchronization algorithm for robust to the combined effects of large Doppler fluctuations and extended, time-varying multipath in the underwater acoustic communication. From the algorithm, we can recover a high timing error which is occurred from an acoustic propagation delay and uncertainty of oscillator between transmitter and receiver. In order to verify the performance of the synchronization algorithm, the lake trial results are used. The lake experiments are performed in a Gyeongcheonho located in Mungyeong-si, Gyeongsangbuk-do. We can see that the start position of frame is adjusted after the frame synchronization while the receiver moving.