• Journal of the Korean Society of Radiology
• /
• v.3 no.2
• /
• pp.23-26
• /
• 2009

This study proposed an improved center array-sequencing phase unwrapping (ICASPU) algorithm. 2% agarose phantom dopped with 0.6mM/l MnCl2 was used with clinical 1.5T MRI system and commercial knee coil. Obtained k-space data(raw-data) was transmitted to PC and reconstructed into phase image with MATLAB software. Previous center array-sequence phase unwrapping algorithm wascompared with proposed ICASP algorithm using second order regression analysis. As a result, we found that the amount of error on proposed ICASPU method is less about 5 times than that of previous CASPU method. In this study, we exploit improved Center array-sequence phase unwrapping algorithm and expect to apply to images including phase informations.

• Geophysics and Geophysical Exploration
• /
• v.12 no.2
• /
• pp.208-214
• /
• 2009

Using the GNSS data and tilt-meter data of Boeun (BOEN) and Goesan (GSAN) GNSS stations, we have calculated the differential distance vector variation with the calculation time span set to 1 hour and 3 hour and differential tilt vector variation along time and derived an indicator of similarity between the two variations along time. The similarity such calculated is rather lower than high. But as the existence of a circular type movement of the antenna's phase center's location due to the tilt's variation of the antenna tower because of the sunlight's diurnal change is certain, we recommend to take such diurnal variation of antenna's location into consideration when the correction error in DGNSS or the measured data at reference stations in VRS (Virtual Reference System) is broadcast.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.4
• /
• pp.319-326
• /
• 2006

To get the highly-accurate and precise position of a GPS receiver, they should consider the state-of-the-art GPS force and measurement models. Especially, the phase center variations (PCV) of a GPS antenna can cause several centimeters of positioning errors in the vertical direction. In this study, we implemented four different models of PCV and evaluated their impact on the computed coordinates. The test data were taken from the 14 National Geography Information Institute permanent GPS stations and 30 Minisry of Government Administration and Home Affairs sites. For different combinations of calibration methods, an average of 1.3-2.6cm of height difference was observed. Also, we found a maximum error of ${\sim}4mm$ in the estimates of the precipitable water vapors.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.580-582
• /
• 2002

본 논문은 위상한정상관법을 이용하여 겹쳐진 화상이 둘 중 어떤 화상에 더 유사한 지를 정량적으로 측정하는 알고리듬을 제안한다. 제안된 알고리듬은 화상을 푸리에변환하여 위상만을 가지고 합성화상을 만든 다음 역푸리에변환을 통하여 만들어지는 위상한정상관을 가지고 유사도를 측정한다. 본 알고리듬에서는 유사도를 충분히 구분할 수 있을 정도로 상수로 설정된 진폭을 충분히 크게 하고 중심부분이외에 나타나는 피크치를 무시하고 오직 중심부분 만의 피크치를 원화상의 자기상관과 비교한다. 실험결과는 진폭을 100으로 하였을 경우 위상한정상관의 피크는 그 유사도가 1에서 0까지 변함에 따라서 100에서 40까지변하는 것을 보여 준다. 이것은 제안된 알고리듬이 위상한정상관을 이용하여 화상의 유사도를 정량적으로 효과적으로 측정하는데 사용될 수 있음을 보여준다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.07a
• /
• pp.73-77
• /
• 1990

홀로그래피 간섭무늬로부터 변형의 요철방향을 구하기 위하여 위상변위방법을 응용하였다. 위상변위법에 의하여 물체파의 위상을 변화시켜 이에따른 홀로그래피 간섭무늬의 이동을 측정하였다. 간섭무늬가 일정지점을 중심으로 좌우로 이동하는 현상으로부터 변형의 요철방향을 파악하고 최대지점의 위치를 구할 수 있었다.

• Journal of the Korean Geographical Society
• /
• v.41 no.2 s.113
• /
• pp.188-194
• /
• 2006

Three-dimensional topological data is essential for 3D modeling and application such as emergency management and 3D network analysis. This paper reviewed current 3D topological data model and developed a method to construct 3D topological node-relation data structure from 2D computer aided design (CAD) data. The method needed two steps with medial axis-transformation and topological node-relation algorithms. Using a medial-axis transformation algorithm, the first step is to extract skeleton from wall data that was drawn polygon or double line in a CAD data. The second step is to build a topological node-relation structure by converting rooms to nodes and the relations between rooms to links. So, links represent adjacency and connectivity between nodes (rooms). As a result, with the conversion method 3D topological data for micro-level sub-unit of each building can be easily constructed from CAD data that are commonly used to design a building as a blueprint.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.11-21
• /
• 2020

This paper deals with the impact of a GNSS (Global Navigation Satellite System) antenna radome on the PCV (Phase Center Variations) and the estimated kinematic coordinates. For the Trimble and Leica antennas, specially set up CORS (Continuously Operation Reference Stations) in Korea, the PCC (Phase Center Corrections) were calculated and compared for NONE, SCIS, SCIT, and TZGD radome from the PCV model published by the IGS (International GNSS Services). The results revealed that the PCC differences compared to the NONE were limited to about 1mm in the horizontal component while those of the vertical direction ranged from a few millimeters to a maximum of 7mm. Among the radomes of which PCV were compared, the SCIT had the most significant influence on the vertical component, and its GPS (Global Positioning System) L2 and L2 PCC (Phase Center Corrections) had opposite direction. As a result of comparing the kinematic coordinates estimated by the baseline processing of 7 CORSs with an application of the PCV models of the various radomes, the SCIS which was actually installed at CORS in Korea showed 3.4mm bias, the most substantial impact on the ellipsoidal height estimation whereas the SCIT model resulted in relatively small biases.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.155-158
• /
• 2005

MRI 스캔시 화상평면내에서 촬상대상물체의 회전은 MRI 신호에 위상오차와 불균일 표본화를 일으킨다. MRI 신호의 위상오차와 불균일 표본화에 대한 문제의 모델은 화상평면내 임의 중심과 원점에 관한 회전운동에 의해 열화된 MRI 신호들사이에 위상차가 존재함을 나타낸다. 이에 아티팩트가 포함된 MR 화상의 화질을 개선하기위해서 다음과 같은 방법을 제안한다. 우선, 2차원 회전운동의 회전각은 이미 알려져 있고, 회전중심의 위치가 미지인 경우에 대해 위상보정에 기초한 아티팩트를 보정하는 알고리즘과, 다음으로, 회전중심과 각도가 모두 미지인 2차원 회전운동에 대해 아티팩트를 보정하는 알고리즘을 제안한다. 이때, 미지 운동 파라메타를 예측하기위해 촬상대상물체의 경계바깥쪽에서 이상적인 MR 화상의 에너지는 최소가 되고, 촬상대상물체의 회전이 존재할 때 측정된 에너지는 증가한다는 성질을 이용한다. 이러한 성질을 이용해서 각 위상부호화 단계에서 미지의 회전각 크기를 추정하기위한 평가함수가 도입된다. 최종적으로 시뮬레이션 화상 및 실제화상에 적용해서 제안한 본 방법의 유효성을 확인한다.

• Bulletin of Korea Environmental Preservation Association
• /
• s.375
• /
• pp.2-3
• /
• 2008

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.3-10
• /
• 1995

In this paper, the phase shifter using the p-i-n diode is designed and analyze. The large phase shift can be achieved by the swithched-line and the hybrid branch line phase shifter, however the small phase shift can be achieved by the loaded-line phase shifter, according to the bias state of the p-i-n niode. The results of the experiment agree with those of computer simulation at the center frequency.