• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.289-296
• /
• 2001

We propose a method to add phase-modulation to binary amplitude data pages using a twisted-nematic liquid crystal display as a dynamic phase mask. For this, the phase modulation characteristics of the display were examined both theoretically and experimentally, and an unexpected abnormal phenomenon was found experimentally in which the modulation property changed as the incident beam intensity increased. To investigate the characteristics of holographically storing the binary data images, eight pages of holograms were stored at one spot of in un-thick Dupont's photopolymer with angle multiplexing. When phase-modulation-added pages were stored at the Fourier plane, the uniformity of the signal beam at the plane was improved, and thus more holograms can be recorded with our method, compared with the conventional case of using only binary amplitude modulation under the same condition.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.10-14
• /
• 1999

One dimensional inhomogeneous phase modulation effects on the MTF of optical system was investigated. The lens under test was a doublet made in Korea. It was 36 mm effective diameter, 128.04 mm effective focal length. The ray-fans and spot diagrams were calculated and presented on the picture for on-axis and off-axis (field of view, $1^{\circ}$ and $2^{\circ}$). Phase modulation was carried out by positioning a phase modulator close contacted with the lens under test. One was linear type that had linearly increasing phase retardation and the other was stepped type which had phase difference $\pi$ for each step. The MTFs were measured on the Gaussian image plane and were compared with one another. The MTFs of linear type phase modulated apertures had a little lower values than the MTF of unmodulated aperture for on-axis but most of all the MTFs of one dimensional phase modulated aperture are improved than the MTF of unmodulated aperture.

• Korean Journal of Optics and Photonics
• /
• v.3 no.3
• /
• pp.143-147
• /
• 1992

1)iscussed in this paper are the effects of phase modulation on the line spread functions (LSF) and MTFs of ;I binocular objective system. The binocular objective lens is made in Korea. It has rotationally symmetric aberrations. The LSFs and MTFs are measured experimentally. The phase modulation is carried out by applying phase retardation $\pi$ on the aperture. The area where the phase is not retarded presents a double annular type. The OTF curves of phase modulated aperture are compared with that of unmodulated aperture. The comparison shows that there is the aberration compensation effect in aberration loaded system. Therefore the performance of many optical system can be improved without any loss of light energy by properly modulating the phase on the aperture.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.22-27
• /
• 1993

We investigate the phase modulation effects on the OTFs of a binocular objective which is made in Korea.The OTFs are calculated from design data for FOV $0^{\circ}$ and $1.5^{\circ}$.The phase modulation is carried out by giving phase retardation $\pi$ on the aperture. The areas where the phases are retarded $\pi$ on the aperture are of an annular type. The OTFs of phase modulated aperture are also compared with that of unmodulated one. The OTFs of an aberration loaded system can be improved by proper phase modulation.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.184-188
• /
• 2003

We fabricated a P-I-i-I-N $GaAs/Al_{0.35}Ga_{0.65}As$waveguide phase modulator with significant phase shift for the TE mode but negligible for the TM mode. We selected the P-I-i-I-N structure to cause a phase shift about the TM mode. The wavelength of $\lambda=1.55$\mu\textrm{m}$ was measured for both the TE and TM modes, respectively. As a result, the measured phase shift efficiency ($\Delta\phi$) by using the Fabry-Perot resonance method was $7.9^{\circ}/V.mm$ for TE-polarized light. Also, no modulation was observed for TM-polarized light.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1511-1517
• /
• 2014

Based on the simulation model for phase noise effect, the phase noise performance of communication system using the M-ary APSK modulation method is analyzed in this paper. The phase noise effects for APSK higher order modulation method are modeled by considering the signal constellations of the modulation methods. The simulation model is verified by comparing the analytic results for lower order modulation signals with simulated results for those modulation signals. Based on the simulation model, then, the phase noise effects for M-ary APSK are analyzed. The simulated results for PSK lower order modulation signals are in agreement with the results by the analytic model in the order of 1 %. The proper phase noise effects for M-ary APSK modulation signals are deduced by the simulation model. Also, the required signal-to-noise ratios of phase noise are proposed for phase noise degradations, which are used as the design parameter that considers the phase noise effect.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.450-457
• /
• 2003

In this paper, we studied the effect of asymmetrical 3rd order IMD of power amplifier due to changes in modulation frequency on IMD cancellation performance. The phase extraction method for determining asymmetric rate for phase distortion of IMD is proposed and the phase difference between lower and upper 3rd order IMD is measured by this method. The phase compensation circuit to decrease the phase difference is also designed and fabricated. From the measurement results using the phase compensation circuit applied to 5 W RF power amplifier fur PCS applications, the 3rd order IMD cancellation performance can be achieved up to 2-tone spacing 1.5 MHz (phase difference within 10$^{\circ}$).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.869-876
• /
• 2016

In the Phase Shifted Full Bridge(: PSFB) converter, there are several design factors including power switches, power switches' driving circuits, transformer and inductor, and rectifier stage, etc. Among them, a key factor influencing an optimal performance of the PSFB converter is the design of transformer. Especially, its effect becomes more important in low voltage and high power applications. In this paper, a study on an optimal design of transformer in the PSFB converter is presented. The design equations for the transformer are derived and analyzed in details, and an example design of the transformer for a 12V, 1200W server power supply application is showed as the result of analysis.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.623-629
• /
• 2003

In this paper, we have proposed a full phase encryption scheme based on phase-encoded XOR operation. The proposed scheme encrypts a gray-level image by slicing an original image and combining with XORed images which resulted from phase-encoded XOR operations between sliced images and phase-encoded binary random images. Then we produce an encrypted image by combining only XORed images and a key image by only phase-encoded binary random images. The encrypted image and key image are converted into encrypted data and key data by a phase-encoding method. The merits are that the proposed encryption scheme can basically fulfill a high-level encryption using a full phase encryption scheme which has nonlinear and invisible characteristics. The scheme also improves security by encrypting the phase information before full phase encryption. The decryption system based on the principle of interference between a reference wave and a direct pixel-to-pixel mapping image of encrypted data with key data can be simply implemented using a phase-visualization system. Simulation results indicate that our proposed encryption scheme is effective and simple for a gray-scale image and optical decryption system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.182-190
• /
• 2011

A amplitude modulation(AM) range measuring system utilizes the phase difference of the modulated envelope of the reflected signal to measure the distance. It is known that the AM system has a problem in accuracy due to antenna leakage signals and spurious reflection signals, but an AM range measurement system using an active reflector, which shifts the frequency bands, has been proposed in order to minimize the measurement errors due to spurious signals. In this paper, a new phase measurement module for the AM range measurement system, which enables to measure long distance with good accuracy, is proposed. The modulation frequency is alternatively selected between 8 and 1 MHz, and the measured distance range with this module is up to 150 m within 2 cm accuracy. A JK flip-flop circuit is used for higher phase accuracy, and an XOR circuit is used to cover long distance.