• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.217-221
• /
• 2012

Blending films having enhanced water-resistance and barrier properties were prepared using the mixtures of poly(vinyl alcohol) (PVA) aqueous solution and poly(ethylene-co-acrylic acid) (EAA) dispersed in water. Thermal-mechanical properties, contact angles, water-vapor transmission rates (WVTR) and oxygen transmission rates $(O_2TR)$ were measured with the content of EAA of blending films, and their water-resistance was evaluated. The tensile strength of the films was found to be $9.16{\sim}11.75\;kg/mm^2$ which showed no significant difference compared with that of PVA, and the hardness increased with the content of EAA. The glass transition temperature and melting temperature of the blending films were slightly improved. The film prepared with PVA/EAA (= 90/10), of which the swelling and solubility were measured to be 109 and 0%, respectively, showed improved water-resistance. The WVTR and $O_2TR$ for the PET film (thickness $50\;{\mu}m$) coated with PVA/EAA (= 90/10) film (thickness $2.5\;{\mu}m$) were measured to be $9.1\;g/m^2/day$ and $2.0\;cc/m^2/day$, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.51-61
• /
• 2008

The determination of precise geoid model for the Jeju island is needed to minimize the effect of different vertical datums. This study describes the development of gravimetric geoid model referred to GRS80 reference surface for the area of Jeju island. We used ECM96 up to degree and order 360 as a reference model and added the terrain and the residual gravity effects to the reference model. After then 17 GPS/Levelling data were used to correct the difference between the GPS/Levelling-derived geoid heights and gravimetric geoid heights. The least square collocation was applied to derive the correction and the grid values. The final precise geoid model(Jeju_GEOID07) that consist of $0.75'{\times}1'$(about $1.4km{\times}1.5km)$ grid interval was obtained in the region of $33^{\circ}{\sim}33.8^{\circ}N$ and $125.8^{\circ}{\sim}127.2^{\circ}E$. Concerning this works, the precise geoid for the Korean peninsula should be determined by integrating the different geoid developed for the peninsula and Jeju island. It is also need to integrate the vertical datum using long-term tide and GPS observations.

• Korean Journal of Remote Sensing
• /
• v.16 no.3
• /
• pp.211-220
• /
• 2000

Even though recurring eddies at the terminal end of the East Korean Warm Current have been identified in the thermal infrared imagery from the NOAA/AVHRR sensor and ocean color data from Orbview-2/SeaWiFS sensor, it is difficult to make observation in the field regarding recurring eddies located around the Wonsan coastal area in North Korea. But we could get in situ data related to an eddy from an ARGOS satellite tracking drifter trapped in the eddy on January 4th, 1999. An ARGOS drifter, a NOAA satellite tracked buoy was trapped by the eddy during January 4th.March 18, 1999. The ARGOS drifter rotated 10 times per 72 days on the edge of the eddy located at $39^{\circ}N$, $129^{\circ}E$. The diameter of the eddy was about 100 km. The horizontal rotation velocity of the recurring cold-core anti-cyclonic eddy was 1.53 km/h(42 cm/sec). The sea surface temperatures of the eddy varied from $14.7^{\circ}C$ on January 5, 1999 to $9.6^{\circ}C$ on March 18,1999. To study the mechanism of the recurring eddy. we tried to find out the relationship between the vector of the drifter moving in the eddy and the wind vector in Sokcho and Ulleung Island located near the eddy in southern Korea, and the difference in sea level between Ulleung Island and Mukho. We hope the results of this study would be useful for calibration and validation data of simulation and numerical modeling studies of the recurring eddy.

• Korean Journal of Remote Sensing
• /
• v.11 no.3
• /
• pp.1-21
• /
• 1995

The characteristics of the Asian summer monsoon have been investigated for the periods of 1993/1994, the contrasting years in a view of the summer monsoon precipitation. In order to investigate the monsoon features over the eastern Asian monsoon region, the cloudiness(using the extensive data derived by the geostationary meteorological satellite), the condition of underlying surface including sea-surface temperature, and the summer rainfall are analyzed and some comparisons with 1993 and 1994 are also made and the characteristic differences are discussed. An analysis of the 2-degree latitude-longitude gridded 5-day mean high cloud amount data shows the detailed movement and persistence of the convective activities. In order to describe the spatial and temporal structures of the intraseasonal oscillation for the movement and evolution of the monsoon cloud, the extended empirical orthogonal fnction analysis with the twenty-day window size is used for the each year. Also, in order to find out the periodicity of the equatorial convective cluster, Fourier harmonic analysis is applied to the each year. The most prevailing intraseasonal oscillations of high cloud amount are 61 day mode and 15day mode in the equatorial and the subtropical oceans. However it was found that the most prevailing modes over the equatorial western Pacific and Indian Ocean were different for each year, hence raising the possibillity that the contrasting monsoon presipitation may be more fundamentally related to the interaction of intraseasonal oscillations and seasonal variation of convective activities over the lower latitude ocean.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.541-548
• /
• 2009

We developed a surface washing system for ginseng. The washing system was developed using different treatments and conditions and characterized in terms of product hardness, weight loss, and change in temperature and color. Optimal results were obtained using a surface washing system involving a washing conveyor speed of 1.0 L/min, a water pressure of $35\;kg/cm^2$, a washing nozzle angle of $40^{\circ}$, a washing height of 5 cm, a 1-sec reciprocating washing nozzle cycle, a dehydration wind velocity of 30 m/sec, and an internal drying temperature of $30-33^{\circ}C$. A surface washing system using a washing conveyor speed of0.8 L/min, a water pressure of $40\;kg/cm^2$, a washing nozzle angle of $40^{\circ}$, a washing height of 3 cm, a 1-sec reciprocating washing nozzle cycle, a dehydration wind velocity of 30 m/sec, and an internal drying temperature of $30-33^{\circ}C$ resulted in ginseng that was stained yellow.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.1
• /
• pp.49-54
• /
• 1988

The present experiment was conducted to investigate causes affecting the reduction of red pepper production in the continuous cultivation upland soil from 1985 to 1986 in Imsil Chonbuk Province. The results obstained are summarized as follows: 1. Area ratio of continuous cultivation 2 years was 12.7%, 3 years 6.8% and over 4 years 48.9%. 2. Soil hardness and volume of solid and liguid of red pepper continuous cultivation soil were higher than those of one year cultivation, while pH and content of organic matter of continuous cultivation soil were low. The exceeding optimum level of phosphorus and potassium appeared factors affecting and reduction of red pepper of continuous cultivation soil. 3. Microflora density in continuous cultivation soil was high but bacteria/fungi (B/F) and actinomycetes/fungi (A/F) ratio were low. 4. The density of soil nematodes in continuous cultivation soil were higher than that in one year cultivation soil, however, the steeper and better drainage soil lowered the density of nematodes. 5. Continuous cultivation over 4 years showed 14.3% of plants diseased by phytophthora while 0.7% in one year cultivation soil.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.322-327
• /
• 2010

Wheat is widely used in food industry because of its low price, convenience, protein-rich resource, easy processibility, and so on. However, people who have wheat-gluten allergy need gluten-free products. Especially, gluten-free products are desirable to early childhood even though they may or may not be sensitive to wheat-gluten. As the alternative of wheat flour, recently, rice flour is gaining popularity. Hence, we developed the puffed rice snack for the baby. In order to prepare for rice extrudate, 1 kg rice flour, 450 g water, and 6 g salt were mixed together and then steamed for 1 hr. The rice extrudate was shredded into pieces (0.5 cm${\times}$0.5 cm) and dried up to 4.5% moisture content. The dried rice shreds were puffed at $257^{\circ}C$ in a puffing machine. The puffed rice snack was oval-shaped having thickness of 0.5 cm, white in color with brown flakes. Appearance and texture of the puffed rice snacks were evaluated by the measurement of the texture, isothermal water absorption, expansion, and the color. Puffed rice was more porous, because rice increased up to about two times larger than its original volume. Texture of the rice puffing snack was suitable for early childhood. Rice puffing snack showed potentials including soft, low-allergenic, and easily digestible properties. It is concluded that rice puffing snack has potential in the food markets for early childhood.

• Korean Journal of Environment and Ecology
• /
• v.32 no.6
• /
• pp.575-581
• /
• 2018

The relationship between the body size of species and the environment has been an active research subject for many years. Until recently, studies had focused on the relationship between the body size and environment based on the ecogeographic rule for various animal groups. In this study, we examined the relationship between body size of Hyla japonica and the habitat environment in Jeju island located at the southernmost part of the Korean peninsula. We collected H. japonica from three breeding sites, Cheonji, Bonggae, and Aewol, and measured SVL, BW, and HW of the species. We also measured the altitude, longitude, latitude, annual mean temperature, and annual mean precipitation of each site to analyze the relationship between the body size and the habitat environment. The analysis results showed that there was the clear difference of the body size according to the habitat and the body size in Aewol was significantly bigger than others, while the body size in Cheonji was the smallest. The altitude was the most important environmental variable and showed a positive correlation with body size. The body size of H. japonica increased as the altitude increased, and this results were consistent with Bergmann's rule, one of the biological laws related to body size. In conclusion, the environment could affect the body size of H. japonica, and the body size has a certain direction according to the environment.

• Journal of Climate Change Research
• /
• v.2 no.2
• /
• pp.79-91
• /
• 2011

In order to study interactions between climate change and air quality, a modeling system including the downscaling scheme has been developed in the integrated manner. This research focuses on the development of a downscaling method to utilize CCSM3 outputs as the initial and boundary conditions for the regional climate model, MM5. Horizontal/vertical interpolation was performed to convert from the latitude/longitude and hybrid-vertical coordinate for the CCSM3 model to the Lambert-Conformal Arakawa-B and sigma-vertical coordinate for the MM5 model. A variable diagnosis was made to link between different variables and their units of CCSM and MM5. To evaluate the dynamic downscaling performance of this study, spatial distributions were compared between outputs of CCSM/MM5 and NRA/MM5 and statistic analysis was conducted. Temperature and precipitation patterns of CCSM/MM5 in summer and winter showed a similar pattern with those of observation data in East Asia and the Korean Peninsula. In addition, statistical analysis presented that the agreement index (AI) is more than 0.9 and correlation coefficient about 0.9. Those results indicate that the dynamic downscaling system built in this study can be used for the research of interaction between climate change and air quality.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.415-423
• /
• 2021

Recently, an R-based point time series data validation system has been established for the statistical post processing and improvement of the National Center for AgroMeteorology-Land Atmosphere Modeling Package (NCAM-LAMP) medium-range prediction data. The time series verification system was used to compare the NCAM-LAMP with the AWS observations and GDAPS medium-range prediction model data operated by Korea Meteorological Administration. For this comparison, the model latitude and longitude data closest to the observation station were extracted and a total of nine points were selected. For each point, the characteristics of the model prediction error were obtained by comparing the daily average of the previous prediction data of air temperature, wind speed, and hourly precipitation, and then we tried to improve the next prediction data using Support Vector Machine( SVM) method. For three months from August to October 2017, the SVM method was used to calibrate the predicted time series data for each run. It was found that The SVM-based correction was promising and encouraging for wind speed and precipitation variables than for temperature variable. The correction effect was small in August but considerably increased in September and October. These results indicate that the SVM method can contribute to mitigate the gradual degradation of medium-range predictability as the model boundary data flows into the model interior.