• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1033-1038
• /
• 1995

NC 공작기계의 contour 운동 오차를 측정하기 위하여 사용되는 Ball-Bar에 의한 원호 보간 시험 데이터를 이용하여 NC controller의 성능을 평가 할 수 있는 S/W에 의한 방법을 제시한다. 본 논문에서 지금까지는 분석이 어려웠던 Masrer-Slave Changeover의 분석을 가능하게 하였으며, Ball-Bar로 부터 얻어지는 데이터를 Weighted Residual Method에 의한 종합적인 분석을 하였으며, 오차 원인별 비교를 위해 Eztra Sum of Squares Method를 도입하였다. 본 연구의 실제 적용을 위한 측정 및 분석 S/W를 개발하였으며, 결과적으로 NC controller의 성능평가에 유용함을 알 수 있었다. 무부하 조건에서의 Ball-Bar에 의한 분석 데이터와의 비교를 위하여 원형 시편을 가공하고, 진원도 측정 및 분석을 통하여 유사한 오차 pattern을 가짐을 알 수 있었다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.158-160
• /
• 2001

본 연구는 레이저 처리기술에 의한 Li$_2$O-A1$_2$O$_3$-SiO$_2$계 유리의 미세가공과 레이저에 의한 유리의 광활성반응에 관한 것으로서, 1064nm와 355nm의 파장을 갖는 Nd:YAG laser를 유리에 조사하여 유리의 파괴특성 및 광학적변화를 관찰하였다. 1064nm 레이저에 의한 유리의 파괴 부분은 광학현미경과 주사전자현미경(SEM)으로서 파괴특성을 평가하였으며, 355nm 레이저에 의한 유리의 변화는 흡수대역을 측정함으로 그 광학적 특성을 나타내었다. 이와 같은 레이저에 의한 가공은 유리내부의 3차원적인 미세구조물 형성이나, internal waveguide, 또는 광 흡수대역의 변화에 따른 광기록방법으로 응용될 것으로 예상된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.977-981
• /
• 2000

Direct drive linear motors have large potential for use as high speed machine tool feed units since they can increase machining rates and improve servo accuracy by eliminating gear related machining problems. So, in this paper, characteristic of 2-axis linear motor feed unit are studied and control gain are adjusted considering positioning, velocity, acceleration and static stiffness. We confirm linear motor feed unit are affected value of control gain sensitively, because drive directly. From the experiment, this feed unit has l${\mu}{\textrm}{m}$ micro step resolution, 5.7${\mu}{\textrm}{m}$ positioning accuracy and under 60${\mu}{\textrm}{m}$ circularity.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.82-95
• /
• 2008

As society has changed to being more knowledge-based, it is necessary that change of paradigm is incorporated into engineering education and the education goals and the assessment method of educational outcomes is developed to promptly meet the needs of the times. A purpose of this study is to measure learning outcomes in coursework of engineering college every semester, which ultimately provides to validate program outcomes. We looked into teaching-learning style of course in the engineering college and analyzed its grade method and tool. By use of a survey, we derived a reasonable method to measure for the learning outcomes in course and presented tools for course-embedded assessment to measure that learning outcomes had been tied to their objectives. These tools are effective to determine that program outcomes and education goals have been achieved, ultimately. In addition, it will help that instruction builds a loop system for better.

• 소성∙가공
• /
• 제8권2호
• /
• pp.135-142
• /
• 1999

Tube Process(TP) is one of the processes to produce permanent magnets. Advantage claimed for this process is that it can accmplish both densification and anisotropication in one step forming. This process is distinguished from other processes since it uses deformable tube for densification of powder magnets. TP has, however, difficulties in manufacturing permanent magnets from Nd-Fe-B green powder due to folding resulted from large height reduction and localized densification. Therefore, an adequate preform is necessary to reduce folding resulted from large height reduction and localized densification. Therefore, an adequate preform is necessary to reduce folding, lead magnets into almost desired final shape and get uniform densification. In this paper, preform design for TP is carried out without a deformable tube to investigate the behaviour of magnet sinter-forging. Preform design is accomplished to increase the effective magnet area with a near net shape and uniform densification.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.399-404
• /
• 2001

In CNC machining, a 3D(3-dimension) linear segment and a 2D(2-dimension) circular arc are general forms given by CAD/CAM system. Generally, the 2D circular arc machining is processed using dividing into some linear segments. A 3D circular arc also don't exist in the standard form of NC data. This paper present a algorithm and method for real-time machining of a circular arc(not only the 2D one, but also the 3D one). The 3D circular arc machining is based on the 2D circular arc machining. It only needs making a new coordinate system, converting given 3D points(a start point, a end point, and a center point of a 3D circular arc) into points of the new coordinate system, and processing a inverse transformation about a interpolated point. The proposed algorithm was implemented and simulated on PC system. It was confirmed to give a gcod result.

• 마이크로전자및패키징학회지
• /
• 제8권4호
• /
• pp.43-45
• /
• 2001

본 연구는 레이저 처리기술에 의한 $Li_2O-A1_2O_3-SiO_2$계 유리의 미세가공과 레이저에 의한 유리의 광활성반응에 관한 것으로서, 1064 nm와 355 nm의 파장을 갖는 Nd:YAG laser를 유리에 조사하여 유리의 파괴특성 및 광학적변화를 관찰하였다. 1064 nm레이저에 의한 유리의 파괴 부분은 광학현미경과 주사전자현미경 (SEM)으로서 파괴특성을 평가하였으며, 355 nm 레이저에 의한 유리의 변화는 흡수대역은 측정함으로서 그 광학적 특성을 나타내었다. 이와 같은 레이저에 의한 가공은 유리내부의 3차원적인 미세구조물 형성이나, internal waveguide, 또는 광 흡수대역의 변화에 따른 광기록방법으로 응용될 것으로 예상된다.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.99-105
• /
• 2014

The domestic airline industry undertakes the production of finished products by assembling existing self-described components via a design process which involves assembly and production steps, after which many of the finished products are exported. However, high reliability and stability must be guaranteed, because customers require high-precision components at the time of manufacturing. In the aircraft parts industry, the mass production of high-value-added parts is limited. Therefore, a small production scale depending on the part is used, as many types of conventional CNC lathe machines with X-axis and Z-axis as well as Z-axis and C-axis CNC milling are used. The parts also rely on high-pressure air to increase production. The most important factors are good stability during processing, as high-precision parts are required, as noted above. It was found that as the C-axis rotation speed increased, the diameter of the cutting tool decreased with a decrease in the surface roughness, while the workpiece rotation speed increased with an increase in the surface roughness.

• 소성∙가공
• /
• 제3권1호
• /
• pp.97-109
• /
• 1994

Closed-die forging of the spur gears with circular are fillet has been analyses by using the upper-bound method. A kinematically admissible velocity field has been developed, wherein, the tooth profile consists of the involute curve and the circular arc fillet. In the analysis, the deformation regions have been divided into eight zones. A constant frictional stress has been assumed on the contacting surfaces Utilizing the formulated velocity field, numerical calculations have been carried out to investigate the effects of various parameters, such as module, number of teeth, addendum modification coefficient and friction factor, on the relative forging pressure of spur gears. As the result of numerical calculations, the relative forging pressure does not change so much against the variation of module. On the other hand, the relative forging pressure increases at the final filling stage as the addendum modification coefficient increases.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.83-89
• /
• 1999

This paper presents the in-process runout compensation methodology to improve the surface quality of circular contouring cut in end milling process. The runout compensation system is based on the manipulation of workpiece position relative to cutter in minimizing the cutting force oscillation at spindle frequency. the basic concept of this approach is realized on a end milling machine whose machining table accommodates a set of orthogonal translators perpendicular to the spindle axis. The system performed that measuring the runout related cutting force component, formulating PI controlling commands, and the manipulating the workpiece position to counteract the variation of chip load during the circular contouring cut. To evaluate the runout compensation system performance, experimental study based on the implementation of two-axes PI force control is presented in the context of cutting force regulation and part surface finish improvement.