• 한국소음진동공학회논문집
• /
• 제17권11호
• /
• pp.1112-1118
• /
• 2007

It was discussed to identify Thiele Small Parameters for Pseudo loudspeaker within 10mm grade microspeaker attached to closed-box using known dynamic mass of moving parts. Also, enhanced circuit model for vented-box micro speaker system was used to more accurately simulate electrical impedance curves for real vented-box microspeaker system and compared to test results. Consequently, it showed that micro speaker could be modeled by pseudo loudspeaker TS parameters similar to general loudspeaker. Vented-box microspeaker model with pseudo loudspeaker TS parameters was well suited to describe real microspeaker. Also, it was proposed to estimate volume of rear closed-box of microspeaker without design specifications.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.525-536
• /
• 2014

In this paper, GUI program for microspeaker system simulation program was developed and verified through closed box, vent box and 6th order bandpass enclosure system. By using the pseudo loudspeaker model concept, TS parameters and rear volume of microspeaker were identified. Their suitabilities were proved by comparing test results with simulations of electrical impedance and sound pressure response curves for the three box types; closed box, vent box and 6th order bandpass box. Also, MSSP was found to be effective regardless of the microspeaker's shape, either circular or rectangular shape. MSSP can be used for the microspeaker system simulation, and can give a general prediction of such as; sound pressure level curve, electrical impedance, diaphragm velocity and displacement curve according to multiple design parameters; diaphragm mass, compliance, force factor, front and rear volume, front and rear port's diameter and length.

• 한국음향학회지
• /
• 제28권4호
• /
• pp.299-307
• /
• 2009

본 연구에서는 마이크로스피커에서 진동판의 패턴에 따른 음향특성의 변화를 연구하였다. 진동판을 에지부와 돔부로 크게 나누고, 이들 각각에 대한 패턴형태의 변화는 진동판의 인장강도에 영향을 주는 것으로 나타났고, 그 결과로써 마이크로스피커의 공명진동수가 변하였다. 에지부에서 패턴의 수가 증가하면, 공명진동수가 증가하여 최대가 된 후에 다시 지수함수적으로 감소하였다. 에지부에서 "U"형 드릴의 사용, 회오리형 패턴과 "V"형 드릴의 각도를 감소시키거나 또는 돔부에서 방사형 패턴의 수와 돔 높이의 감소와 곡률반경의 증가는 진동판의 인장강도를 증가시켜 공명진동수를 높였다. 그러나 에지부에서 "V"형 드릴의 사용, 방사형 패턴과 "V"형 드릴각도의 증가와 돔부에서 방사형 패턴의 수와 돔의 높이를 증가시키거나 곡률반경을 감소시키면 진동판의 인장강도가 감소하여 공명진동수가 감소하였다.