• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.956-961
• /
• 2003

Direct numerical simulations of flow over a circular cylinder are performed at two different Reynolds numbers (Re=220 and 300) that correspond to three-dimensional instabilities of mode A and mode B, respectively, to investigate the characteristics of drag and lift at these Reynolds numbers. The drag and lift coefficients are measured locally along the spanwise direction and their characteristics are studied in detail. The variation of total drag in time is large at Re=220, and the total drag becomes minimum when vortex dislocation occurs in the wake. The drag and lift variations in space are also closely associated with the evolution of vortex dislocation at this Reynolds number. At Re=300, vortex dislocation is not found in the wake and temporal variations of drag and lift are much smaller than those at Re=220, but their spatial variations are quite large due to the near-wake secondary vortices existing in the mode B instability.

• 대한조선학회논문집
• /
• 제36권4호
• /
• pp.37-47
• /
• 1999

본 논문에서는 접수(water entry) 및 이수(water exit) 문제를 유동장의 지배방정식인 2차원 비압축성 Navier-Stokes방정식을 일반좌표계(generalized coordinate system)에서 유한체적법(Finite Volume Method)으로 이산화 하여 해석하였다. 강체의 접수 또는 이수 상황에서 발생하는 자유수면 변형에 대한 처리는 Level-Set[11]기법을 사용하였다. 수치계산결과에서 접수에 대한 유체충격력에 대한 계산결과는 쐐기(wedge)형과 flared-ship 단면의 실험결과[5]와 비교하였으며, 원형실린더의 이수문제에서는 시간에 따른 자유수면의 변형 및 유동장의 특징을 살펴보았다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.582-587
• /
• 2001

A numerical method using FLUENT code was employed to investigate fluid drag and lift forces on a cylinder in a group of circular cylinders, subjected to a uniform cross flow. The cylinders can be arranged in tandem or in a staggered arrangements relative to the free stream flow. A vortex street behind the cylinder pairs or jets between the cylinders forms according to the arrangements. Vibration on a cylinder can occurs due to vortex shedding, fluid-elastic stiffness and wake galloping. The flow is first investigated and then the forces acting on the cylinder are calculated. The lift and drag forces on an elastically mounted cylinder in the wake of an upstream fixed cylinder arise from the mean flow plus velocity and pressure gradients in the wake. The analytical results of two staggered cylinder were compared with the existing experimental ones for validation of the present method. The analytical results of the forces were in good agreement with the experimental ones. The present method can be used for the analysis of the fluid induced vibration where the group of circular cylinders are subjected to a cross flow.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.413-422
• /
• 2004

The flow characteristic in the wake around a circular cylinder with tripping wires, which was set in constant distance, was experimentally investigated in the uniform flow, Re=2.92$\times10^4$. The measurement of velocity vector and pressure distribution are carried out various angles of tripping wires in the range of $50^(\circ)$ to $80^(\circ)$ with $10^(\circ)$ interval. The results show that velocity profiles and pressure distributions are different with angles of tripping wires. The drag of the circular cylinder was decreased about 60% maximum when tripping wires' angle was $50^(\circ)$. The lowest reduction of the velocity and wake width was occurred by coanda effect when the angle was $60^(\circ)$, and the vortex shedding periodicity become rare at the same time.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.622-625
• /
• 2008

While the research for flow over a circular cylinder has been actively carried out up to the present, it has been known that the flow has not been clarified even now. Various complex flow and aero-acoustic characteristics exist around a circular cylinder such as flow separation, wake and pressure wave propagation. In this paper, research was carried out for wake flow and aeroacoustics over a circular cylinders by using high order, high resolution techniques that are used in two dimensional aero- acoustic analysis. OpenMP parallel processing method was used. For the numerical result, the periodic characteristic of Strouhal Number due to vortex shedding was comparatively analyzed with other experiment values and two dimensional numerical results.

• 해양환경안전학회지
• /
• 제22권6호
• /
• pp.750-757
• /
• 2016

본 연구에서는 파 주기와 기울기에 따른 단일 실린더와 다중 실린더의 wave run-up을 추정하였다. 3차원 비압축성 점성 난류 유동이며 서로 다른 상을 가지는 이상유체에 대한 수치해석을 수행하기 위하여, 본 연구에서는 전산 유체 역학 상용코드인 "STAR-CCM+"을 기반으로 하여 VOF기법과 realizable $k-{\varepsilon}$ 난류 모델을 사용하였다. 모델스케일에 대한 파 주기는 단일 실린더의 경우 1.269초와 1.692초이고, 다중 실린더의 경우 1.716초이다. 각 케이스 별로 1/30, 1/16의 파 기울기를 가진다. 최종적으로 파 기울기와 주기에 대한 wave run-up 추정 결과는 관련 실험 결과와 비교하였다. 수치해석 결과는 실험과 비교하여 정성적으로 유사함을 확인하였다.

• 한국해양공학회지
• /
• 제18권3호
• /
• pp.1-7
• /
• 2004

Flaw visualization and velocity field measurement methods have practical applications in the various fluid engineering fields, such as mechanics, ships, and heat fluids. In this study, the basic principles and theoretical methods are used to establish an application technique of Particle Imae Velocimetry(abbreviated to PIV below). Accordingly, the measured results of velocity field distribution of a section inside the Circulating Water Channel (abbreviated to CWC below) are computed using the PIV is presented. The uniformity of velocity distribution of the section in CWC is confirmed, by comparing this PIV data with the existing current meter data. Also, in order to measure the flaw fields of surroundings of 2-dimensional cylinder in the CWC, the flaw visualization technique using the PIV is applied.

• 대한기계학회논문집B
• /
• 제37권7호
• /
• pp.629-636
• /
• 2013

공압 부상은 베르누이 원리에 기초한다. 그러나 공압 부상 방법은 제품의 원가 상승의 요인이 되는 대량의 유량을 소모하는 것으로 알려져 있다. 이 논문에서는 베르누이 부상 유동의 통찰력을 얻기 위해 수치 해석 연구를 수행하였다. 3차원 압축성 Navier-Stokes 방정식과 SST k-${\omega}$ 난류모델에 유한 체적법을 적용하여 계산하였다. 기체 유량, 공정 제품의 직경 그리고 원형실린더와 공정 제품사이의 간극을 다양하게 변화하여 공정 제품 주위의 유동 특성을 조사하였다. 그 결과 부상력을 위한 최적의 간극과 공급 기체 유량이 증가하면 큰 부상력이 발생한다는 것을 알았다.

• 한국가시화정보학회지
• /
• 제18권1호
• /
• pp.59-66
• /
• 2020

In the present study, we experimentally investigated the flow around a circular cylinder with axially arranged holes (AAH). The wind-tunnel experiment was performed at Re = 3.2 × 10⁴ while varying the angle of attack (α) from 0° to 90°. At low α, the passive jet from the AAH pushes near wake to the downstream, increasing the wake formation length. On the other hand, at high α, blowing and suction through AAH occurs alternatively, rather decreasing the wake formation length. The passive jet generated by AAH can effectively control not only the wake where AAH is located, but also the wake between holes. As a result, the AAH reduce the drag on the cylinder up to 23.8% at low α but rather increase the drag at high α, as compared to that on a smooth cylinder.

• 한국전산유체공학회지
• /
• 제8권3호
• /
• pp.50-55
• /
• 2003

Recent numerical simulation has a tendency to require the higher-order accuracy in time, as well as in space. This tendency is more true in LES and acoustic noise simulation. In the present work, the accuracy of a Fractional step method, which is widely used in LES simulation, has been increased to the fourth-order accurate compact Pade discretization. To validate the present code, the flow-field past a cylinder was simulated and compared with experiment. A good agreement with experiment was achieved.