• Journal of Korea Game Society
• /
• v.21 no.6
• /
• pp.31-40
• /
• 2021

Go has a history of more than 2,500 years, and the life-and-death problems in Go is a fundamental problem domain that must be solved when implementing a computer Go. We attempted to determine the numbers of prototypical eye shapes with 3, 4, 5, and 6 eyes that are directly related to the life-and-death problems, and to classify the prototypical eye shapes represented in 4-tuple forms. Experiment was conducted by Monte-Carlo method and point pattern matching. According to the experimental results, the numbers of prototypical eye shapes were 2 for 3-eye, 5 for 4-eye, 12 for 5-eye, and 35 for 6-eye shapes. Further, using a 4-tuple form, we classified prototypical eye shapes into 1 for 3-eye, 3 for 4-eye, 4 for 5-eye, and 8 for 6-eye shapes.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.34-39
• /
• 2009

In this paper, the CFD analysis using various turbulent models has been performed to evaluate which type of turbulent models can predict well the mixing flow structure of $45^{\circ}$ impinging round jet. This CFD analysis has been carried out through the commercial Fluent software. As a result, any of turbulent models cannot predict the experimental results definitely all over the flow range. However, as compared with the experimental results, the turbulent model of realizable(RLZ) k-$\varepsilon$ only predicts well in the limited range between X/$X_0=1.1$ and X/$X_0=2.0$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1754-1762
• /
• 2001

본 연구의 목적은 적합성과 기능성이 고려된 체형별 남성 상의 원형 패턴을 개발하는데 있다. 피험자는 인체계측자료와 측면체형 사진에 의해 선정하고, 체형은 굴신체형, 표준체형, 반신체형으로 분류하였다. 체형별 실험 원형 패턴의 평가를 위하여 기존원형을 선정하였으며, 연구 결과는 다음과 같다; 1. 착의평가 결과 표준체형은 대부분의 항목에서 적합하였으나, 굴신체형과 반신체형에서는 많은 차이가 있었다. 이러한 차이는 앞길이와 등길이 뿐만 아니라 여유량과 윗 가슴둘레에 서 나타난다. 앞품과 뒤품은 외관에 의해 많은 영향을 받으며, 증가된 옆품은 앞품과 뒤품의 부족분을 보충하는 역할을 하였다. 따라서 실험패턴은 기존패턴보다 각 체형에 더욱 적합하며, 체형 적합성과 동작기능성이 고려된 의복 제작을 위한 패턴설계는 인체의 구조와 동작연구에 의해 가능하였다. 2. 기본원형 패턴 설계를 위한 필요치수는 목뒤높이, 등길이, 앞길이, 윗 가슴둘레, 앞품과 뒤품이며, 체형분류의 기준은 윗 가슴둘레, 앞품, 뒤품, 앞길이, 등길이이다. 이와 같은 결과를 근거로 가슴둘레 선은 [(B/2+B/10), 뒤진동깊이는 [(B/10+목뒤높이/10)]로 설정하고, 앞내림은 1.5cm로 하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1566-1574
• /
• 1992

Local heat transfer characteristics for a round air jet impinging normally on a heated flat plate were experimentally investigated. The problem parameters investigated were jet Reynolds number, Re=4000,10000, and 20000, and nozzle-to-plate spacing(L/D) of 2,6, and 10. The temperature variations on the flat uniform heat flux surface were mapped using a thermo-sensitive liquid crytal sheet. The isochromatic images corresponding to the characteristic temperature of liquid crystal were analyzed with the help of a digital image processing system. The local Nusselt number, Nu decreased rapidly in the impingement region and exhibited a similar profiles in the wall jet region independent of the nozzle-to-plate spacing L/D. In the case of large Reynolds number, heat transfer rate (Nu) was proportional to 0.5 power of the Reynolds number. For L/D=2, a secondary peak in the heat transfer rate was seen in the region of X/D=1.5~3 due to the transition from laminar to turbulent boundary layer.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.34-41
• /
• 1997

The objective of this study is to investigate experimentally the frequency characteristics of the hole tones generated by a circular jet of low speed impinging on a plate with a round hole. The experimental results about the sound spectrum and the time wave of the hole tone are presented and discussed in relation with the hole type, the jet velocity and the distance of the nozzle-to-plate with a round hole. From the sound spectrum and time wave measurements, it is found that the hole tone is generated not only by an interaction of convected vortices with a round hole but also by a series of vortex shedding from jets passing through a hole. The hole tones generated by a feedback mechanism consist of many frequency stages and also have a hysteresis phenomenon like an edge tone. But the hole tones generated by a series of vortex shedding have nothing with the stage characteristics. The frequencies of hole tones are influenced by the jet velocity, the distance of the nozzle-to-plate with a round hole and the hole type.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.179-187
• /
• 2000

The achene morphology about 16 taxa of Korean Aster L. sensu lato were investigated to estimate its taxonomic values. The achene shapes were divided into four types; oblanceolate-oblong, obovate, oblong and obovate-oblong. The trichome shape on achene six types; uniseriate-conical, filiform, cylindrical, capitate type, long stalk capitate and globular. Their distributional features on upper part of achene four types; absent, sparse distribution of conical trichome, dense distribution of conical trichome and mixed distribution of conical and capitate trichome. The achene shapes and trichome characteristics were regarded to be a good characters in delimiting taxa because these did not differ among individuals in same taxa, but differ among the taxa. If Korean Aster L. sensu late were divided into Kalimeris, Heteropappus, Aster, Cymnaster, the capitate forms and mixed distribution of conical and capitate trichome were recognized as the good characters in delimting above section such as genus Kalimeris and Heteropappus, section Pseudocalimeris of Aster L. sensu stricto.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.6
• /
• pp.1636-1645
• /
• 1996

In this paper we proposed a new scheme for conditional two dimensional (2-D)moment-based classification of patterns on the basis of Gibbs random fields which are will suited for representing spatial continuity that is the characteristic of the most images. This implementation contains two parts: feature extraction and pattern classification. First of all, we extract feature vector which consists of conditional 2-D moments on the basis of estimated Gibbs parameter. Note that the extracted feature vectors are invariant under translation, rotation, size of patterns the corresponding template pattern. In order to evaluate the performance of the proposed scheme, classification experiments with training document sets of characters have been carried out on 486 66Mhz PC. Experiments reveal that the proposed scheme has high classification rate over 94%.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.2
• /
• pp.1-6
• /
• 1999

We propose a new algorithm for pattern classification by extracting feature vectors based on Gibbs distributions which are well suited for representing the characteristic of an images. The extracted feature vectors are comprised of 2-D moments which are invariant under translation rotation, and scale of the image less sensitive to noise. This implementation contains two puts: feature extraction and pattern classification First of all, we extract feature vector which consists of an improved 2-D moments on the basis of estimated Gibbs distribution Next, in the classification phase the minimization of the discrimination cost function for a specific pattern determines the corresponding template pattern. In order to evaluate the performance of the proposed scheme, classification experiments with training document sets of characters have been carried out on SUN ULTRA 10 Workstation Experiment results reveal that the proposed scheme had high classification rate over 98%.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.3
• /
• pp.22-28
• /
• 2010

Adaboost is well known for a representative learner as one of the kernel methods. Adaboost which is based on the statistical learning theory shows good generalization performance and has been applied to various pattern recognition problems. However, Adaboost is basically to deal with a two-class classification problem, so we cannot solve directly a multi-class problem with Adaboost. One-Vs-All and Pair-Wise have been applied to solve the multi-class classification problem, which is one of the multi-class problems. The two methods above are ones of the output coding methods, a general approach for solving multi-class problem with multiple binary classifiers, which decomposes a complex multi-class problem into a set of binary problems and then reconstructs the outputs of binary classifiers for each binary problem. However, two methods cannot show good performance. In this paper, we propose the method to solve a multi-target classification problem by using radial basis function of Adaboost weak classifier.

• Proceedings of the Costume Culture Conference
• /
• 1997.10a
• /
• pp.16-18
• /
• 1997