• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.136-139
• /
• 1997

Applications of commercial software DEFORM-3DTM for 3-D simulation in extrusion process are developed for the analysis of twisting of extruded products. Because the elliptical shape has at least one line symmetry, the twisting is not occured during the extrusion. But, the results of extrusion simulation of the elliptical shape show that the twisted boundary of the die surface makes the material inside die surface rotate with the constant angular velocity. Otherwise, the simulation results of the S shaped product show that the twisting can be occured by the only 180$^{\circ}$rotation symmetry of S shape without no line symmetry and show that the angular velocity increases by the only 180$^{\circ}$rotation symmetry without no twisted die surface between on the die entrance section and on the die exit section. The results of the analysis show that the angular velocity of the extruded product changes with die length and friction condition.

• Transactions of Materials Processing
• /
• v.4 no.4
• /
• pp.302-321
• /
• 1995

A method of determining an optimum blank shape for the non-circular deep drawing process is investigated. The rigid-plastic finite element method is introduced and the computer program code is developed. The ideal shape of a drawn cup with uniform wall height is assumed and metal flow is traced back-ward step by step to predict an initial blank shape of the ideal cup. For examples of the non-circular deep drawing products, three cases of drawn cup with quadrilateral punch shape are considered and optimum blank shapes for each case are proposed and compared with experimental results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.377-382
• /
• 2005

하도내에 설치된 3개의 구조물이 모두 제거된 상태에서 원형하천의 합류부 하류의 유량이 $Q_{100}=12,090m^3/sec$인 경우에 대해 본류와 지류의 유량비($Q_s/Q_m$)가 0.99, 0.85, 0.72, 0.67, 0.57로 변화하는 경우의 유량을 실험유량으로 사용하여 수리모형실험을 수행하였다. 하도의 구조물이 제거된 경우 합류부로 근접할수록 서서히 증가한 수위는 합류부를 지나면서 급격히 감소한다. 이때 본류와 지류의 유량비($Q_s/Q_m$)가 감소할수록 합류부에서 증가된 수위는 하류쪽으로 이동하며 합류부 이후에서의 감소폭이 작아지며 각 단면에서의 수위변화율은 합류부 상류 구간에서는 감소하고 합류부 하류 구간에서는 증가하고 있다. 또한 합류부에 가까울수록 횡단면에서의 수위차는 증가하여 합류부 중심 직하류 단면에서 최대를 보이는데 유량비가 감소할수록 합류부 횡단면에서의 수위차는 하류구간에서는 감소하며 합류부 상류구간에서는 증가한다. 합류구간의 유속변화에 있어서는 합류부에 가까울수록 평균유속이 감소하다가 합류부에서 증가하기 시작하여 합류부 중심 직하류 단면에서 평균유속이 최대를 나타내며 최대유속의 변화율은 합류부 하류구간보다 합류부 상류구간에서 더 크게 나타난다. 합류지역의 주흐름구간은 합류점 이후 구간에서 합류점 부근의 평균 유속보다 큰 유속을 보이는 구간으로 유량비가 감소하면 주흐름구간의 폭이 증가하며 하도의 하류쪽으로 이동하기는 하나 유량비에 의한 영향은 크지 않다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.300-306
• /
• 2019

Transmission cross section(TCS) is described analytically as $2G{\lambda}^2/4{\pi}$ irrespective of the aperture shapes for various transmission resonant apertures, such as small ridged circular or H-shaped, U-shaped, or Jerusalem cross-shaped apertures in an infinite thin conducting plane. The proposed expression is validated by comparison with the numerical results obtained from the method of moments(MOM). The TCS characteristics of the transmission resonant cavity structure in a thick conducting plane are also studied and the equivalence between the two small aperture structures is reported from the viewpoint of transmission efficiency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.339-344
• /
• 1993

A study for a lathe to machine workpieces with noncircular corss-sections is presented. The noncircular cutting is accomplished by controlling the radial tool position synchronized with the revolution angle of spindle. A learning control algorithm is suggested for the toll positioning, of which the control performances are analyzed and simulated on a numerical computer that the effectiveness of the control is convinced. The learning control is tested on a NC-lathe which shows successful results.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.253-257
• /
• 1998

지금까지 직물의 역학적 특성을 고찰하기 위하여 직물의 구조에 대한 기하학적인 모델들이 많은 연구자들에 의해 소개되어 왔다. 1937년에 Peirce$^1$가 원형 단면의 모델을 제안하면서부터 이 모델을 기본으로 한 기하학적 모델에 대한 연구가 활발히 진행되어 race track 모델, lenticular 모델, circular arc 모텔, 직선 모델등 여러 가지 모델이 제시되었다. 이러한 모델들은 직물의 종류와 이완상태에 따라 직물의 역학적 특성을 예측하는데 있어 커다란 차이가 있다.(중략)

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.3
• /
• pp.107-115
• /
• 2000

충적지반에 건설된 원형 단면을 갖는 터널은 지진시에 지반의 전단 변형의 영향을 받아 좌우교차로 경사진 타원형상의 변형을 반복한다. 본 논문에서는 이 특별한 진동모드를 이용하여 지반-터널계의 상호작용 및 면진 효과가 검토되었다. 지반과 터널의 경계가 완전히 결합되어 있는 경우에 대한 지반 -터널계의 상호작용 효과 및 지하 구조물의 지진피해를 줄이는 한가지 방법으로써 터널 주위를 면진재로 피복하는 방법에 대한 면진효과가 토론되었다. 그 결과 면진재의 포아송비를 작게 하거나 지반과 면진재의 전단탄성계수의 비를 증가시킴으로서 면진 효가가 증가함을 알 수 있었다.

• Composites Research
• /
• v.29 no.5
• /
• pp.293-298
• /
• 2016

In this paper, Glass Fiber Reinforced Thermoplastic (GFRTP) for automotive headlight source module was fabricated by compounding and injection molding using PPS (Poly Phenylene Sulfide) resin with glass fiber which has three cross section (round type, cocoon type, flat type). Tensile, flexural, impact properties were investigated on effect of cross section, glass fiber contents. And it was observed flatness, dimensional stability, fluidity depending on glass fiber cross section. As a result, flat glass fiber reinforced thermoplastic's mechanical properties were most excellent. Also, dimensional stability and flatness showed better results when using flat glass fiber.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.3
• /
• pp.251-260
• /
• 2003

A three dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of deep, tapered rods and beams with circular cross section. Unlike conventional rod and beam theories, which are mathematically one-dimensional (1-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components u/sup r/, u/sub θ/ and u/sub z/, in the radial, circumferential, and axial directions, respectively, are taken to be sinusoidal in time, periodic in , and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the rods and beams are formulated, the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four-digit exactitude is demonstrated for the first five frequencies of the rods and beams. Novel numerical results are tabulated for nine different tapered rods and beams with linear, quadratic, and cubic variations of radial thickness in the axial direction using the 3D theory. Comparisons are also made with results for linearly tapered beams from 1-D classical Euler-Bernoulli beam theory.

• Conservation Science in Museum
• /
• v.19
• /
• pp.53-68
• /
• 2018

Hanging scrolls and handscrolls are common mounting for East Asian painting and calligraphy in which wooden Chukmok with Chukdu of various materials are attached either at the top and bottom or at each side of a work. Hanging scroll paintings or calligraphy can be hung for appreciation and rolled up for preservation. The Chukmok and Chukdu of a hanging scroll were made from different materials and were known by distinct names in Korea, China, and Japan. In Korea, the wooden Chukmok were called sanghachukhoengmok(上下軸橫木), which means horizontal wooden bars for the top and bottom axes. The wooden Chukdu were called Chukdu(軸頭), meaning the head of an axis. These Chukmok and Chukdu were made of Korean red pine, nut pine, or shiny xylosma. In China, the rod was called zhougan(軸杆) and zhoutou(軸頭), and they were made of Japanese cedar, sappan wood, or red sandalwood. In Japan, the top rod was called hassou(八双; 八裝) and the bottom jikugi(軸木), and they were made of Japanese cedar, red sandalwood, or crystal. In Korean hanging scrolls, the cross section of a Chukdu is either flat or round, and it can be either patterned or patternless. The designs include concentric circles, two circles, and three circles. Among the portraits of meritorious subjects analyzed in this study, three examples feature concentric circles on Chukdu with a flat cross section, which coincides with most of the king's instructions housed at the Jangseogak Archives. This suggests that flat Chukdu with a concentric circle pattern were used for binding most of the paintings of meritorious subjects commissioned by the royal court.