The Journal of the Korean bone and joint tumor society
/
v.11
no.2
/
pp.155-159
/
2005
Purpose: To find out the pathologic symptoms, and the incidence and clinical significance of the coexistence of internal derangement of knee(IDOK) in osteochondroma around the knee. Materials and Methods: We retrospectively reviewed forty-five patients under 20 years of age treated with the excision of the osteochondroma around the knee between 1995 and 2004. We analyzed age, gender, past history, family history, solitary or multiple osteochondroma, presenting pathologic symptoms, and causes of IDOK. Results: IDOK was confirmed in nine(20%) among the 45 cases. There were four cases of multiple osteochondromatosis, and IDOK was coexisted in one case among them. The most common presenting pathologic symptoms were painless mass of 38 cases, however 9 cases among them had joint pain for IDOK. There were 7 cases of meniscal tears and 2 of pathologic plica. Discoid meniscus was found in 4 cases among the 7 cases of meniscal tears. Conclusion: Coexistence of osteochondroma around knee and IDOK in this study probably represents a coincidence rather than a real association. However the incidence might be not low, special study and close observation should be done.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.13
no.4
/
pp.199-204
/
2003
Microstructure and chemical analysis of sintered bricks containing recycled wastes were investigated by SEM and EDS. The recycled wastes for which substitute ceramic raw materials were EAF (electric arc furnace) dust, fly ash and stone ash. Yellowish and brownish regions on the surface and brownish and blackish regions in the inside of bricks were observed. Main component of yellowish region on the surface turned out to be Zn. No chemical difference between the black-core region and brownish matrix. Mullite crystallites of 1 fm size were distributed in the inside of bricks and enclosed by glass phases. It seems that alumine-silicate mixtures of kaolin and fly ash were transformed to mullite crystallites during the sintering. Relatively large pores ot several ten fm size were observed in the black-core region in the inside of bricks. The main components of the inside of brick were Al and Si. The minor components were C, Na, Mg, K, Ca, and Fe. Particularly, the precipitates of Fe-rich crystallites were observed in the amorphous matrix. These precipitates were formed due to the local reduction atmosphere in the inside of bricks. Zn-rich covers were found on the surface of bricks because Zn diffused from the inside of bricks to the surface under the reduction atmosphere.
In order to quantify the contribution of cosmic-ray ionizing component to the dose given by natural background radiation, a series of measurement has been carried out using LiF TLDs for about one and a half years on quarterly basis. Three different types of LiF TLDs namely, chips and PTFE based disks of $^{7}LiF$, and the same disks of $^{6}LiF$ for identifying possible contribution of neutron component were used. Measurements were made by placing badge-incased TLDs in a lead castle of 10 to 15cm thick installed in a room on the third floor of a four-story building in CNU Daedeok campus for 5 cycles of 90 days. For comparison a series of spectrometric study was also performed for the energy region over 3MeV using a 3'${\phi}\;{\times}\;3$'NaI(Tl) scintillation detector in association with an MCA of 1024 channels, and it was found that the data obtained by the TLDs placed in the lead castle indicate 75% of the dose given by outdoor cosmic-ray component. The results obtained by the TLDs through correction for shielding loss show that the outdoor dose contribution of ionizing component of cosmic rays at this campus is $34.3{\pm}1.1nGy/h$ which satisfactorily agrees with that expected for our particular location of measurement.
Kim, C.A.;Choi, H.J.;Yoon, H.K.;Park, S.Y.;Kim, J.Y.
Applied Chemistry for Engineering
/
v.9
no.1
/
pp.149-154
/
1998
The characteristics of drag reduction and rheological behaviors were investigated using cationic surfactants, whose microstructures are known to change when concentration of the surfactant exceeds CMC. The firstly formed spherical micelles change to rodlike or disklike micelles because of packing between surfactants micells, and of thermodynamic perference. The drag reduction becomes significant when the concentration increases over this micellar transient point. Drag reductions were measured as a function of concentration, and rheological characteristics of the surfactant were further investigated to understand the correlation between their rheological properties and drag reduction. Micelles show the non-Newtonian behavior, and shear thickening behaviors were observed due to the structural development. In addition, structural developments were determined by adding the counter-ion in case of DOBON-G.
KSCE Journal of Civil and Environmental Engineering Research
/
v.35
no.2
/
pp.377-386
/
2015
The helical pile is a manufactured steel pile consisting of one or more helix-shaped bearing plates affixed to a central shaft. This pile is installed by rotating the shaft into the ground to support structural loads. Advantages of the helical pile are no need for boring or grout process, and ability to install a pile foundation with relatively light devices. In this study, an optimized design method for helical piles is proposed to minimize the material cost with consideration of the load bearing capacity obtained by the cylindrical shear method. The harmony search meta-heuristic algorithm was adopted for optimization process. The optimized design was verified by comparing with the 2009 International building code. It is noted that the optimization for the configuration of helical piles along with material cost proves to be an out-performed tool in designing helical pile foundation with economic feasibility.
Objectives: This study investigated the effects of the color components of light-cured composite resin before and after polymerization on degree of conversion (DC) and biaxial flexural strength (FS). Materials and Methods: Four enamel shades (A1, A2, A3, A4) and two dentin shades (A2O, A3O) of Premisa (Kerr Co.) and Denfil (Vericom Co.) were evaluated on their CIE $L^*,\;a^*,\;b^*$ color components using the spectrophotometer before curing, after curing and at 7 day. The DC of same specimens were measured with Near-infrared spectrometer (Nexus, Thermo Nicolet Co.) at 2 hr after cure and at 7 day. Finally, the FS was obtained after all the other measurements were completed at 7 day. The correlations between each color component and DC and FS were evaluated. Results: The light-curing of composite resin resulted in color changes of Premisa in red-blue direction and Denfil in green-blue direction. The DC and FS were affected by product, time and shade (3-way ANOVA, p < 0.05) and product and shade (2-way ANOVA, p < 0.05), respectively. Premisa only showed a significant correlation between the DC and CIE $a^*$ component - before and after polymerization (Pearson product moment correlation, p < 0.05). The FS of Premisa showed significant negative correlations with CIE $a^*$ and CIE $b^*$ components. Conclusions: The DC and FS of the light-curing composite resin were affected by the color components of the material before and after polymerization.
Lee, Beom Seob;Ji, Keum Bae;Kim, Sung Chan;Yoo, Soo Nam
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2017.04a
/
pp.78-78
/
2017
현재 국내에 공급되고 있는 잡곡류 수확기는 보행형 예취기, 탈곡기 위주의 저능률 기계화 수준으로 고능률의 콤바인 수확기 개발이 필요하며, 특히 잡곡류가 소규모 경작지의 영세농가 위주로 재배되어 저가격의 소형 콤바인 수확기 개발이 절실히 요구되고 있다. 따라서 본 연구는 소규모 밭의 두류 및 잡곡 수확작업에 적응성이 뛰어나며, 농기계 임대사업소의 활용도를 높일 수 있고, 여성과 고령자도 쉽게 운전할 수 있어 수확작업의 노동력을 크게 절감할 수 있는 저가격의 25kW급 자주식 소형 콤바인을 개발하고자 시작기를 설계 제작하였다. 시작기의 주요부로 엔진은 25kW/2600rpm 3기통 디젤엔진을 탑재하였으며, 동력전달부는 주변속 3단, 부변속 2단의 선택맞물림 기어식의 변속장치를 이용하였다. 주행부는 궤도형으로 조향클러치와 습식 원판식 제동장치를 채용하였다. 전처리부는 선단거리 1700 mm의 디바이더와 상하좌우 수동 조절되는 회전속도 약 42 rpm의 정오각형 릴로 구성하였으며, 전처리부의 최대 승강높이는 740 mm이었다. 작물이송부는 돌기부착 오거와 체인컨베이어로 구성되어 있으며, 탈곡부는 단동형 축류식의 직경 440 mm, 길이 1180 mm의 급동과 높이 65 mm, 지름 10 mm의 46개 강봉형 급치, 격자형 수망으로 구성하였으며, 회전속도는 약 325 rpm으로 작동하도록 하였다. 선별 정선부는 요동 송풍선별식으로 곡립판, 볏짚체, 곡립체, 송풍팬으로 구성하였고 송풍팬의 회전속도는 약 850 rpm, 요동진동수는 약 5.8 Hz로 작동하도록 하였다. 곡물이송부와 재처리부는 수평이송 외경 103 mm, 수직이송 외경 110 mm의 피치가 모두 82 mm인 스크류컨베이어를 이용하였으며, 곡물탱크는 용량이 250 로 2개의 배출구로 곡물을 포대에 담도록 하였다. 그 외 시작기는 운전조작부, 유압장치부, 전기장치부 등을 갖도록 설계 제작하였다. 전체적인 기체의 크기는 길이${\times}$폭${\times}$높이 $3935{\times}1900{\times}2440mm$이었으며, 기체 중량은 약 1753 kg이었다. 콩 대상 기초 성능시험 결과 시작기의 작업속도는 약 0.5 m/s, 작업능률은 약 11 a/h로 나타났다.
Among the skeletal tuberculosis, tuberculous spondylitis is high incidence and curable disease, if early diagnosis and treatment are possible. We reviewed clinical manifestations and radiologic analysis of 30 cases tuberculous spondylitis from May 1983 to Sept. 1986, at Yeungnam medical center, Yeungnam University. The results were follows : 1. The frequent involve sites were thoracolumbar vertebra. 2. The continuous lesion is 86.7% of the all cases. 3. The most common type was intervertebral type, and lytic and sclerotic lesion were same incidence. 4. Paravertebral abscess, kyphosis and disc space narrowing were demonstrated more than 80.0% of the cases. 5. Computed tomography was more accurate diagnostic method rather than conventional plain study to evaluation of extent of lesion, involvement of spinal canal and cord, and size and location of paravertebral abscess. And CT guided abscess drainage procedure was helpful to diagnosis and treatment. 6. Ultrasonography was helpful to differential diagnosis between paravertebral abscess and other solid mass, and useful to follow up study of paravertebral abscess after treatment.
Proceedings of the Korean Society for Noise and Vibration Engineering Conference
/
1995.04a
/
pp.344-349
/
1995
셀구조물은 선박, 항공기, 우주선 등의 산업분야에 자주 사용되는 중요한 구조요소로서, 이에 대한 연구도 공학적 필요성에 의해 많은 연구가 진행되어 왔다. Maddox등의 Rayleigh-Ritz법, Srinivasan and Bobby의 적분방정식 기법, Petyt의 유한요소법, Irie, Henderson등의 전달매트릭스법, 그 외 Webster, Petyt and Deb Nath, Blevins, Srinivasan and Krishnan등에 의해 여러가지 해석방법의 진동해석이 행해져 왔다. 현재 주로 사용되고 있는 매트릭스 구조해석 및 진동해석 방법으로는 유한요소법과 전달매트릭스법을 들 수 있다. 유한요소법은 범용적인 해석 프로그램의 개발은 수월하지만 대규모의 선형 연립방정식의 해법에 귀착되므로, 기억용량이 큰 대형컴퓨터가 필요하고, 반면 전달매트릭스법은 기억용량이 적은 퍼스널컴퓨터로도 계산수행이 가능하나 고차의 고유진동수를 구할 경우나, 중간에 단단한 경탄성지지가 존재할 경우 등에는 수치계산상의 문제점이 지적되고 있다. 이에 대한 대책으로, 상태변수를 바꾸어 넣은 Riccati방법, 각 절점의 기지의 상태변수를 제거하는 Frontal법, 전달매트릭스와 강성매트릭스를 결합시키는 방법 등이 보고 되고 있다. 이에 자자들은 퍼스널컴퓨터 이용에 적합한 고속, 고정도의 구조해석 및 진동해석 기법으로 전달영향계수법을 제안하여, 원판구조물, 사각판구조물, 원통형 셀구조물 등의 여러가지 형상구조물의 자유진동 해석에 적용해서, 종래의 전달매트릭스법에 비해 계산정도 및 계산속도의 양면에서 매우 우수함을 보고한바 있다. 본 연구에서는 동적영향계수의 축차전달에 그 개념을 두고 있는 전달영향계수법을 좀 더 일반화시키고 체계화시키기 위하여 탄성지지를 갖는 셀구조물에 적용하여 자유진동 해석 알고리즘을 정식화한 후, 간단한 모델에 대한 수치실험을 통해서 전달 영향계수법으로 구한 해를 전달매트릭스법의 결과와 비교.검토하여 본 방법의 유용성을 확인하였다.
Mixing is most important for developing an electric washer which transforms angular momentum from rotating solid wall to laundry clothes inside it. For magnification of this mixing effect, some inventions are introduced to washing machine system, i. e., washing plate, washing rod, and even for washing cap in a model of a Korean manufacture. However, the previous efforts show dissatisfaction up till now. In this paper, a triumph to enhance mixing effects to increase washing performance is presented and verified by numerical investigation. The present model to simulate a washing tub is the simple circular cylinder with two endwall disks which is completely filled with a viscous liquid. The present improvement is to change mounting position of a bottom disk of the model cylinder. Therefore, the aim of this work just proposes a new idea, which is numerically inspected, to a producer of washing machine, In detail, this invention is alternating the mounting position of a rotating bottom disk. Actually skewed pulsator is placed in steady of a flat disk, so the two endwall disks at top and bottom are not in parallel. The angle between an inclined bottom disk and the horizontal plane is fixed as 5 degree and physical domain to consider poses a sliced cylinder. Flow fields in both a right circular cylinder and the present improved model are fully depicted by numerical integration on a body fitted nonorthogonal regular uniform grid system. Numerical data to explain flow structure are plotted for understanding of the effects of the inclined disk. Also enhanced mixing effects by the inclined rotating disk are gauged by accurate numerical data used in this work.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.