• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.147-154
• /
• 2003

Radial Dual Mass Flywheel(RDMF) is designed to reduce torsional vibration and noise occurring in automotive powertrain. In this paper, finite element method is used to evaluate stress level and critical area of the torsional spring box, a major part of RDNF system. In finite element analysis, both static and dynamic loadings are considered and it is found that the most critical spot is the welded zone of spring box. Also, fatigue test is performed and fractured surfaces are examined to find fatigue stress level by experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.409-411
• /
• 1994

A rotating experimental unit for the train control is made and the train detection method by the inductive radio line is adopted. In this unit, the inductive radio line is spreaded on the rotor plate and the receiving antennas are equipped on the stator side. The detection circuits for train position and train speed are composed and an application of the train control by PID controller is presented.

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.58-62
• /
• 2015

When an emergency generator is running, it supplies the power for critical loads. Generator protection requires the consideration of many abnormal conditions that may occur with generators include overvoltages and ground faults. Modern day power systems create harmonics within the electrical network that can have an impact upon the associated protective system. This paper focuses on the analysing of the cause and development of a solution for the malfunction of induction disc type overcurrent ground relay by generation of harmonics during emergency generator operation.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.15-21
• /
• 1999

This study investigates the free and forced vibration characteristics of an annular piezoelectric motor stator constructed of two piezoelectric material layers and one stainless steel layer. The annular piezoelectric motor stator is subjected to a travelling load produced by piezo drive electrical voltage input to the two piezoelectric layers. The stator is modeled as an annular laminated plate based on the classical plate theory and the governing equations are derived via Hamilton's variational principle. Variation of the free vibration characteristics as a function of several design parameters has been studied and based on this result, the forced vibration responses to the input electricity of various frequencies and magnitudes are investigated. The obtained results will provide an important criterion, a priori, in the design of piezoelectric motors.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.99-102
• /
• 2003

PIV(Particle Image Velocimetry)was used to visualize the interaction of reed valve of the reciprocating compressor. The valve is the key part which governs the efficiency, noise and reliability of the compressor, so the development of analytical model about valve performance is necessary. As the valve reed is opened and closed by pressure pulsation, the flow characteristic of the refrigerant passing the valve is very important. In the present study, a circular disk with inclination is assumed to be the valve reed of a reciprocating compressor, The mean velocity shows the vortical characteristic of this flow. It is found that the back flow is affected by the height of reed valve of reciprocating compressor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.559-564
• /
• 2001

In order to apply into a compact and reliable centrifugal blood pump, this paper introduces a self-bearing motor in which a rotor is rotated without contact. The rotor is actively controlled in only radial directions, while the axial and tilting motions are passively stable owing to the disk-shape structure of the rotor. A prototype was made in outer-rotor type that is far better in the compactness than inner-rotor type. The prototype could be driven up to 8000 rpm with the rotor vibration under 0.12mm. The maximum cardiac output and pressure head were 9 L/min and over 200 mmHg, respectively. These experimental results show that the proposed self-bearing motor has sufficient performance for application to a real blood pump.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.383-386
• /
• 1999

본 연구에서는 공중용 초음파 센서에 많이 사용되고 있는 원판형 압전소자, 정합층, 그리고 후면충, 세 부분으로 이루어진 다층 접합체의 진동 특성을 기계적 진동 방정식을 이용하여 이론적으로 해석하였으며, 해석결과의 타당성을 유한요소 해석방법을 사용하여 검증하였다. 본 연구의 해석 방법은 다층 판, 특히 압전세라믹과 정합층으로 이루어진 2층과 후면층이 추가된 3층에 대한 진동 방정식에 적절한 경계 조건 및 수렴조건을 적용하여 고유진동 주파수를 유도하였다. 그리고 이를 이용하여 초음파 탐측자 개발 시 널리 사용되고 있는 설계변수 즉, 각 층의 반경, 두께, 밀도, 그리고 영률의 변화에 대한 공진주파수의 변화 경향을 분석하였다. 공진주파수 변화 경향에 대한 이 해석 방법의 타당성을 널리 사용되고 있는 유한 요소해석법을 사용하여 검증한 결과, 두 해석결과는 좋은 일치를 보였다. 그러므로 본 연구의 결과는 종래의 등가회로나 유한요소 해석법에 비해 더 간편하고, 더 정확한 해석결과를 제공할 수 있는 해석도구로써 이용될 수 있을 것이다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.757-762
• /
• 1998

“하나로”를 이용하여 강내 조사용으로 사용되는 $^{192}$ Ir 선원의 제조법을 확립하였다. HTS (Hydraulic Transfer System)조사공에서 48시간 조사한 $\psi$2.5 mm x t 0.25 mm의 원판형 Ir 표적 10장을 쌓아서 방사능이 1.012 Ci인 선원을 시험제조하였다. 선원 제작에 관련된 생성방사능, 중성자 자기홉수효과 인자를 이론적으로 계산하여 시험제조에 사용하였고 ${\gamma}$선 자기흡수효과는 실험으로 측정하여 암 치료에 요구되는 10-20 Ci 선원의 상용생산에 필요한 자료를 확보하였다. 치료용 소선원 제작에 관련된 표적제작, 중성자조사, 방사능 측정, 선원조립, 밀봉용접, 품질관리 등의 제작기술을 확립하고 선원의 안전성은 밀봉시험, 표면오염검사 등을 수행하여 확인하였다. 제조된 선원은 실제 사용되는 조사장치에 장착하여 기능시험을 수행할 것이다. 이번 실험을 통하여 강내 조사용으로 사용되는 10-20 Ci 방사능의 $^{192}$ Ir 선원을 안정적으로 공급할 수 있음을 확인하였으며 하나로를 이용하여 캡슐 직경 4 mm의 치료용 소선원 제작기술을 확립하였다. 개발된 /spp 192/Ir 강내 조사용 선원은 국내 5-6개 병원에 공급할 것이며 이 기술을 바탕으로 직경 1.1-1.6 mm의 강내 조사용 선원도 개발할 예정이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.53-54
• /
• 2009

Nowadays, source of MEMS, USN, Hybrid parts pay attention to energy harvesting. On this paper, energy harvesting was studied using piezoelectric effect. And, piezoelectric generator was designed and fabricated. Generators were designed by FEM simulation program and generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Using fabricated generators, output voltages dependant on thickness of ceramic, displacement of vibration, frequency of vibration were measured.

• 대한관절경학회지
• /
• 제2권2호
• /
• pp.177-180
• /
• 1998

Discoid meniscus is an uncommon cause of internal derangement of the knee joint. The discoid medial meniscus is much less common than the discoid lateral meniscus. A 15-year-old male student had a incomplete discoid medial meniscus of right knee combined with a horizontal tear. This was confirmed by magnetic resonance imaging(MRI) and arthroscopic procedure. Partial meniscectomy was performed arthroscopically. An unevenful recovery followed. We report a case of discoid medial meniscus with brief review of literature.