• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.190-205
• /
• 2016

Buddhist stupas, which are a symbolic architecture of Buddhism and enshrine the Jinsinsari of Buddha, were reinvented as stone stupas appropriate for the natural soil of Korea from existing wooden stupas around the 7th century after the introduction of Buddhism. Later, the construction of a stone stupa was expanded to local areas from the central area around the 9th century; thus, stone stupas of more diverse local colors were built in a nationwide scale, and today it is called a "country of stone stupas". While focusing on the stylistic interchanges between stone stupas, which were established in each region in accordance with the localization of the establishment of stone stupas that was begun actively from the 9th century, this paper selected several cases of stone stupas among about 50 stone stupas in the Gangwondo-region. First, the study compared the stone stupas and Buddhist priest tower of Seollimwonji, Jinjeonsaji, and Geodonsaji, which are located at the same temple site as the current Buddhist priest tower, from among typical Silla style stupas that match the 9 stone stupas in the Gangwon-do region. This is because stylistic interchanges were possible while there were mutually organic relationships between Buddhist statues such as stone stupas, Buddhist priest towers, stone lanterns, and Buddhist pedestals, which used the same stone material along with the expansion of Buddhism to local areas in accordance with the spread of Zen Buddhism in the 9th century. Second, a comparison was made of the stylistic similarities between the Woljeongsa Palgakgucheong (eight sides nine-storied) stone stupa and the Sinboksaji Samcheung (three-storied) stone stupa, which are totally different in regard to the number of stories and the flat form. These two stone stupas are representative Goryeo stone stupas. The Woljeongsa stone stupa is a Goguryeo-oriented stone stupa with many sided multiple stories whereas the Sinboksaji stone stupa has been known as an early case of the insertion of the support of Tapsin in each story. Although the two stone stupas may look very different, but through close investigation it was confirmed that there were many stylistic interchanges between them and not only the seated stone Buddha statue in the cylinder jewel case in front of the stupa but also the stone stupa established by the same master. Consequently, this paper aimed not merely to mention the simple patterns of stone stupas, but, further, to trace the interchange in patterns in accordance with the construction period based on those patterns.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.54-71
• /
• 2012

This paper investigates Buddhist sculptures of the Gulsan-sa School of Seon Buddhism, which was established by the priest Beomil(梵日) at Myeongju(溟州), present-day Gangneung(江陵) area, and prospered until the late Goryeo period. There are very few surviving Buddhist images at Gulsan2 temple-site showing the Buddhist art when Beomil or his disciples, Gaecheong(開淸) and Haengjeok(行寂), were active, except a set of huge stone pillars for temple-banners and a stone monk stupa. It is therefore necessary to focus on pieces of artworks in Gangneung and nearby areas to explore the characteristics of Buddhist art of Gulsan-sa from the late Silla to early Goryeo period. For example, the stone relief seated Buddha image, one of Four Buddhas of Four Directions, and a stone relief of standing Guardian King both from the stone pagoda at Mujin temple-site(無盡寺址) can be compared with stupa reliefs at the capital Gyeongju area in their high quality of carving. The stone octagonal base showing seven lions on each of seven sides at Boheon-sa(普賢寺) demonstrates that it was made as a part of an octagonal lotus pedestal for a Vairocana Buddha now lost. Since Boheon-sa was erected by Gaechung, a disciple of Beomil as a branch of Gulsan-sa, it is fair to assume that the Vairocana image at Boheon-sa might have been closely related to the Buddhist images at Gulsan-sa in its style and iconography. The stone seated Bodhisattva from Hansong temple-site(寒松寺址) displays a benign face, exquisite necklace, and exotic iconography in its hand gesture and high cylindrical crown. The stone seated Buddha at Cheonghak-sa(靑鶴寺), brought from a temple-site where fragments of roof-tiles with the inscription of Heukam-sa(黑岩寺) were discovered, displays the late Silla and early Goryeo period. Heukam-sa seems to have been related to Gulsan-sa or have been one of the branches of Gulsan-sa. Extant fragments of artworks at Myeongju implicate the high quality of Buddhist art of Gulsan-sa in its iconography and style as well as unique features of Gulsan-sa Seon School.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.1
• /
• pp.44-67
• /
• 2016

This article studied the character of Bogamri group and trends in the surrounding area through recently excavated stone chambers. The first type of stone chamber constructed at Bogamni cemetry was Northen Kyushu style stone chamber tomb with corridor. However, According to recent survey Wa style vertical stone lined tomb had constructed earlier than these stone chamber along the southwest cost. It is likely that the background of these Wa style stone tomb was the beginning of formal diplomatic relations between Baekje and Wa. At first, grave goods as well as burial had been Wa style, but gradually local burial element and mortuary practices added. And large tomb had beginning to appear. The representative tombs are Yeongam Okyari Jangdong tomb and Naju Gaheugni Shinhueng tomb. They were built in the middle of the fifth century. It is most likely that the location was selected with regard to the use or securing of inland waterway. But the next step, Yeongsangang river style stone chamber with corridor had constructed at Jeongchon tomb. That tomb is very close to Bogamni tombs and structure and grave goods are very similar also. So these two groups were considered to be the same community. Hereby, It is believed that the inland waterway using power had been turned over to Bogamni group. Bogamni group had constantly constructed stone chamber until seventh century. This represent that Bogamni group had thrived as a leading force in the Yeongsangang river basin. After under the direct control of Baekje, Bogamni group had continued the close relationship with Wa. For this reason, Bogamni group had influenced southwest cost as well as Yeongsangang river basin. It can be estimated by the Bogamni style stone chamber founded at islands of Shinan.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.22-37
• /
• 2021

The wind chime is a longstanding Jangeomgu (majestic article) found in Korea, China, and Japan. However, basic research on wind chimes is currently inadequate as it is difficult to estimate the time of production, and there are few relics. Therefore, this research morphologically classifies the eight bronze wind chimes decorating the baldachin of the Stone Standing Maitreya Bodhisattva of Gwanchoksa Temple, Nonsan. Based on this, the manufacturing techniques and production period are scientifically demonstrated. The synthesis of the research results reveals that the structure and characteristics of the wind chimes of the Stone Standing Maitreya Bodhisattva of Gwanchoksa Temple, Nonsan differ depending on their location on the baldachin. The four large-sized wind chimes on the lower-baldachin were manufactured by casting a Cu-Sn-Pb alloy, and they are estimated to have been made during the early period of Goryeo. The two medium-sized wind chimes of the upper-baldachin's northern direction were manufactured through forging a Cu-Sn or Cu-Sn-Pb alloy, and they appear to have a similar structure to the cylindrical wind chimes appearing during the latter period of Goryeo and the Joseon period. The two small-sized wind chimes of the upper-baldachin's southern direction were manufactured by casting a Cu-Sn-Pb alloy containing Zn, and based on the chemical composition of the alloy and the shape of the clapper, they are estimated to have been manufactured during the latter period of Joseon. Through the observation of microstructures and a chemical composition analysis, it is demonstrated that two wind chimes of the lowerbaldachin were manufactured by casting and slow cooling the alloy with an alloy ratio of Cu:Sn:Pb≒80:15:5. In addition, it is estimated that the wind chimes of the upper-baldachin's northeast direction were manufactured by forging an alloy of Cu-Sn with a similar alloy ratio to that of forged high tin bronze. The results of a comparative analysis of prior research on domestic wind chimes confirm that two wind chimes of the lower-baldachin have a similar composition ratio to the wind chime excavated from Wolnamsaji in Gangjin, containing an amount of tin that corresponds with ancient records. Having a similar alloy ratio to forged high tin bronze, the wind chimes of the upper-baldachin's northeast direction are the only instances among all of the wind chimes that have been examined to date that were manufactured using this forging method. The purpose of this research is to collect baseline data to verify and classify the manufacturing period of wind chimes according to their morphological characteristics based on scientific evidence. It is hoped that this data can be utilized for the restoration and conservation processes of the wind chimes of the Stone Standing Maitreya Bodhisattva of Gwanchoksa Temple, Nonsan.

• Journal of agriculture & life science
• /
• v.53 no.1
• /
• pp.117-126
• /
• 2019

This paper presents an experiment to examine the possibility of treating carcass while making compost with a horizontal cylinder composting equipment. The findings were as follows: as for heavy metal content, zinc content was above the allowed level in some measuring sections of the general operation and the entire measuring sections of the carcass operation, whose copper content was higher than the general operation. The wood chip operation was lower than the allowed level in all the heavy metals and similar or the same as the carcass operation in copper, cadmium and arsenic. Its nickel content was 29.5~63.8%, which was relatively higher than 9.3~18.0% and 15.8~18.0% of the general and carcass operation, respectively. Its chrome content was 14.2~31.9%, which was relatively higher than that of the general and carcass operation. The integrated operation was lower than the allowed level in all the heavy metals. Its copper and zinc content was 34.9~54.5% and 53.1~75.9%, which was similar to 48.9~52.6% and 64.6~85.9%, respectively, in the wood chip operation. Its chrome and nickel content was stabilized while their content was rather high in the wood chip operation. The average and final moisture content of the carcass operation was 60.7% and 49.6%, respectively. Its average moisture content was a little bit higher than the recommended level of 55.0%, but its final moisture content was lower than the recommended level. The average and final moisture content of the integrated operation was 29.2% and 18.6%, respectively, which was the lowest level among the four operation modes. The overall moisture content of the operation modes was under the recommended level of 55.0% with some variance among the modes. The C/N ratio was the lowest in the carcass operation and the highest in the general operation. The average C/N ratio of the operation modes was in the range of 13.7~20.3 with the total average of 18.3, and the modes kept it under the proper level of 30.0.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.206-219
• /
• 2021

The warming of the climate is increasing the damage caused by termites to wooden buildings, cultural properties and houses. A group removal system can be installed around the building to detect and remove termite damage; however, if the site is not visited regularly, every one to two months, you cannot observe whether termites have spread within, and it is difficult to take prompt effective action. In addition, since the system is installed and operated in an exposed state for a long period of time, it may be ineffective or damaged, resulting in a loss of function. Furthermore if the system is installed near a cultural site, it may affect the aesthetic environment of the site. In this study, we created a detection system that uses wood, cellulose, magnets, and magnetic sensors to determine whether termites have entered the area. The data was then transferred to a low power LoRa Network which displayed the results without the necessity of visiting the site. The wood was made in the shape of a pile, and holes were made from the top to the bottom to make it easier for termites to enter and produce a cellulose sample. The cellulose sample was made in a cylindrical shape with a magnet wrapped in cellulose and inserted into the top of a hole in the wood. Then, the upper part of the wood pile was covered with a stopper to prevent foreign matter from entering. It also served to block external factors such as light and rainfall, and to create an environment where termites could add cellulose samples. When the cellulose was added by the termites, a space was created around the magnet, causing the magnet to either fall or tilt. The magnetic sensor inside the stopper was fixed on the top of the cellulose sample and measured the change in the distance between the magnet and the sensor according to the movement of the magnet. In outdoor experiments, 11 cellulose samples were inserted into the wood detection system and the termite inflow was confirmed through the movement of the magnet without visiting the site within 5 to 17 days. When making further improvements to the function and operation of the system it in the future, it is possible to confirm that termites have invaded without visiting the site. Then it is also possible to reduce damage and fruiting due to product exposure, and which would improve the condition and appearance of cultural properties.

• Conservation Science in Museum
• /
• v.27
• /
• pp.147-164
• /
• 2022

Over 200,000 Korean cultural heritage items are currently located abroad. They have made their way to 22 countries under different circumstances and with unique backgrounds. While some of them continue to contribute to promoting Korean culture around the world, others cannot be exhibited due to damage or poor condition. In view of these circumstances, the Overseas Korean Cultural Heritage Foundation (OKCHF) has since 2013 provided museums and art galleries abroad with support for the conservation, restoration, and utilization of the Korean cultural heritage items that they house. As a part of these efforts and on the occasion of the 120th anniversary of the diplomatic relationship between the Republic of Korea and the Kingdom of Belgium in 2021, a gilt-bronze case for acupuncture needles dating to the Goryeo period (918-1392) from the collection of the Royal Museums of Art and History (RMAH), Belgium was brought to Korea for conservation treatment. The primary purpose of this conservation treatment was to restore the original form of the relic and slow to the degree possible the progress of corrosion. The conservation treatment of the gilt-bronze case followed the fundamental order of conservation treatment: removal of corrosive substances, stabilization, and reinforcement. Since this was the first case of restoring metallic cultural properties under the abovementioned support program by the OKCHF, special methodologies distinct from those available in overseas institutions were required. Diverse scientific methods (e.g., X-ray inspection, CT scanning, 3D microscopy) were applied to identify the metalcraft techniques used in the Goryeo period. The analysis found that several designs, including lotus and scrollwork, were exquisitely engraved on the surface of the case by making dots using a round-edged chisel. A bronze plate engraved with designs was rolled into a cylindrical form. The ends were overlapped by 2 to 3 centimeters and then attached to each other by silver soldering. The overlapping ends were welded flat with nearly no gaps. As the final process in the production, the case was lavishly gilt with gold powder using amalgam gilding. The conservation treatment of the gilt-bronze case for acupunctural needles in the RMAH collection restored the original form of the relic and arrested further corrosion. Above all, it revived the historic and academic value of the overseas Korean cultural heritage through scientific analysis.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.113-118
• /
• 2022

This study was conducted to diversify the cultivation of mushroom items and develop a competitive variety of Hypsizigus marmoreus. We focused on developing Hypsizigus marmoreus with lower bitterness, likable shape, and high yield. We have collected and tested characteristics of genetic resources from domestic and abroad since 2019. Breeding (2019), characterization (2020), productivity test (2021), and farm demonstration test (2021) have been sequentially conducted. We bred the new variety 'Yunseul' with unique traits. The optimal temperature for mycelial and fruit body growth were 22-25℃ and 15-18℃, respectively. It was similar to the control variety (Mangadak-2Ho) in the pileus form (hemispherical shape) and the cultivation period. However, it was thinner and longer than the control variety with the pileus diameter, thickness, stipe diameter, and length being 19.9 mm, 7.0 mm, 9.4 mm, and 86.3 mm, respectively. The effective number of fruit bodies was 47.8 in bottle cultivation, which was more than that of the control variety. The yield was 197.4 g/bottle (1,100 cc), which was 30% higher than the yield of the control variety, 151.9 g/bottle (1,100 cc). The parent and control varieties were also incubated alongside the new variety. The somatic incompatibility line was distinct. The band pattern in the mycelial DNA PCR reaction was different from that of the parent and control varieties, confirming the hybrid species.

• Korean Journal of Environment and Ecology
• /
• v.37 no.1
• /
• pp.86-93
• /
• 2023

This study investigated the ecological characteristics of Odontobutis interrupta at the Geumdang Stream from January to December 2021. The riverbed structure of the species habitat was rich in sand and mud. The water was deep, ranging from 21 to 124 cm, with an average of 48 cm. The stream velocity was slow at 0.24 (0.08-0.36) m/sec. The ratio of females to males was 1:0.98, and the total length of collected individuals ranged from 23 mm to 162 mm. The age according to the total length-frequency distribution as of May indicated that the group with a total length of 23-59 mm was one year old, the group with 60-99 mm was two years old, the group with 100-139 mm was three years old, and the group with 140-162 mm was four years old. As a secondary gender characteristic, the females genital papilla had a cylindrical shape, a hollow inside of the tip, and a longer diameter than males. The males had a cone shape with a pointed end. Sexually mature males had the nuptial color, with a black abdomen and whole body. Some females with a length ranging from 60 to 69 mm and all females 70 mm longer were sexually mature. Some males with a length ranging from 70 to 79 mm and all males 80 mm longer were sexually mature. The spawning season was from May to July, and the water temperature was between 19.6℃ to 29℃ during that period. The prosperous spawning season was June (26℃). The average number of eggs in the ovaries was 2,473 (883-4,955) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 1.42 (1.20-0.54) mm. The correlation between total length and weight was BW=0.0000006TL^3.21 with the constant a as 0.0000006 and parameter b as 3.21. The condition factor (K) was 1.67 (1.18-2.43) on average, and the slope was 0.116.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.1-11
• /
• 2023

In this study, we explore the morphological and geochemical characteristics for 440 manganese nodules collected from two different water depths [ARA12B-St52 (150 m, n = 239) and ARA12B-St58i (73 m, n = 201)] on the continental shelf of the East Siberian Sea from the ARA12B expedition in 2021. We also discussed the variations in the characteristics of manganese nodules with varying water depths in the Arctic Sea. The sizes of the nodules are generally greater than 3 cm at both sites. However, there is an obvious difference in the morphology with water depths. For the nodules collected at 150 m, brown-black colored tabular, tube, and ellipsoidal shapes with a rough surface texture are dominant. On the other hand, yellow-brown tabular shapes with a smooth surface texture are common for the nodules collected at 73 m. Furthermore, the slope of trend line between size and weight is significantly different at both sites: particularly, the slopes of nodules at 150 and 73 m are 1.60 and 0.84, respectively. This indicates the difference in the internal structure, porosity, and constituting elements between both nodules. Micro X-ray Flourescence (µ-XRF) results clearly demonstrate that the internal textures and chemical compositions are different with water depths. The nodules at 150 m are composed of a thick Mn-layer and a thin Fe-layer centered on the nucleus, while the nodules at 73 m are alternately grown with thin Mn- and Fe- layers around the nucleus. The average chemical compositions obtained by µ-XRF are 40.6 wt% Mn, 5.2 wt% Fe, and 7.9 Mn/Fe ratio at 150 m, and 10.3 wt% Mn, 19.0 wt% Fe, and 0.6 Mn/Fe ratio at 73 m. The chemical compositions of the nodules at 150 m are similar to those of nodules from the Peru Basin in the Pacific Ocean, while the compositions of the nodules at 73 m are similar to those of nodules from the Cook Islands or the Baltic Sea. The observed morphological and geochemical characteristics of the nodules show a clear difference at the two sites, which indicates that the aqueous conditions and formation processes of the nodules in the Arctic Sea vary with the water depths.