• Journal of the Korean GEO-environmental Society
• /
• v.7 no.4
• /
• pp.15-24
• /
• 2006

It is well known that earth pressure on the cylindrical open caisson and cylindrical retaining wall of a shaft is less than that at-rest and in plane strain condition because of the horizontal and vertical arching effects due to wall displacement and stress relief. In order to examine the earth pressure distribution of a cylindrical wall, model tests were performed in dry sand for the care of constant wall displacement with depth. Model test apparatus which can control wall displacement, wall friction, and wall shape ratio was developed. The effects of various factors that influence earth pressure acting on the cylindrical retaining wall of a shaft were investigated.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.175-187
• /
• 2003

The earth pressure acting on the cylindrical retaining wall in cohesionless soils is different from that on the retaining wall in plane strain condition due to three dimensional arching effect. Accurate estimation of earth pressure is required for the design of vertical cylindrical retaining wall. Failure modes of the ground behind vertical shaft are dependent on ground in-situ stress conditions. Failure modes are actually divided into two modes of cylindrical failure mode and funnel-shaped mode with truncated cone surface. Several researchers have attempted to estimate the earth pressure on cylindrical wall for each failure mode, but they have some limitations. In this paper, several equations for estimating the earth pressure on cylindrical wall in cohesionless soils are investigated and new formulations for two failure modes are suggested. It rationally takes into account the overburden pressure, wall friction, and force equilibriums on sliding surface.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.4
• /
• pp.75-88
• /
• 2004

It is known that the earth pressure acting on the cylindrical retaining wall in cohesionless soils is small than that acting on the retaining wall in plane strain condition due to three dimensional arching effect. In this study, the earth pressure equation considering the earth pressure decrease by horizontal and vertical arching effects, overburden, wall friction, and failure surface slope is proposed. For the purpose of verifying the applicability of proposed equation, model test is performed with apparatuses that can control wall displacement, wall friction, and wall shape ratio. Influence of each factor on the active earth pressure acting on the cylindrical retaining wall is analyzed according to the model test in constant wall displacement condition. The comparison of calculated results with measured values shows that the proposed equations satisfactorily predict the earth pressure distribution on the cylindrical retaining wall.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.3
• /
• pp.83-98
• /
• 2000

유연한 액체 저장탱크 내 유체의 부가질량 및 슬러싱 강성행렬을 도출하는 새로운 방법을 제시하였다. 비점성, 비압축성 이상유체를 표면 출렁임을 고려하여 경계요소법에 의하여 모델링하였다. 유체의 표면과 저장탱크 벽체의 접촉면과 같은 불연속 경계를 다루기 위해 특별한 과정을 도입하였다. 원통형 액체저장탱크의 지진응답해석에 적용하여 우수한 결과를 얻을 수 있음을 확인하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.143-155
• /
• 2007

The earth pressure acting on a circular shaft wall is smaller than that acting on the wall in plane strain condition due to the three dimensional axi-symmetric arching effect. Accurate estimation of the earth pressure is required for the design of the shaft wall. In this study, the stress model considering the decrease of earth pressure due to the horizontal and vertical arching effect and the influence of shape ratio (shaft height/radius) is proposed. In addition, model test on the sandy soil is conducted and a comparison is made between the stress model and the test results. The comparison shows that the proposed stress model is in agreement with test results; decrease of shape ratio (increase of radius) leads to stress state equal to the plane strain condition and approximate stress distribution is found between stress model and model test results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.145-151
• /
• 2019

The fragility analyses for the partially filled horizontal cylindrical tank having a flexible wall were conducted to evaluate seismic performance. An equivalent simplified model with two lumped masses representing to impulsive and convective masses was used to represent the liquid storage system. This simplified model was validated by comparing its time history analysis results with the 3D FSI model results. The horizontal tank was analyzed under bi-directional excitations. Seismic fragility curves for the stability were developed in transverse and longitudinal directions. Fragility curves show that seismic damage for the horizontal storage system is more susceptible in the transverse direction.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.287-290
• /
• 2009

이 논문에서는 가압중수형(Pressurized Heavy Water Reactor) 프리스트레스 콘크리트 격납건물의 1/4 축소모델에 대한 극한내압능력과 전반적인 비선형거동에 관한 유한요소 해석을 수행하였다. 가압중수형 격납건물은 원통형 벽체와 돔으로 구성되었고, 4개의 부벽을 갖는다. 유한요소해석을 위해서 상용코드 ABAQUS를 이용하였고, 콘크리트, 철근 및 텐던에 대한 수치모델링을 작성하여 자중과 내압하중을 적용하였고, 텐던의 2% 변형률을 기준으로 극한내압능력을 평가하였다. 이때 사용된 재료모델로 콘크리트는 Concrete Damaged Plasticity 모델을 사용하였고, 철근과 텐던은 Elasto-Plastic 모델을 적용하였다. 유한요소 해석결과 콘크리트의 초기균열 0.41MPa에서 발생하였고, 극한내압은 0.56MPa 정도로 평가되었다.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.80-90
• /
• 1993

Radiation streaming through penetrations has been of great concern in radiation shielding design and analysis. This study developed a Monte Carlo method and constructed a data library of results calculated by the Monte Carlo method for radiation streaming through a straight cylindrical duct in concrete walls of a broad, mono-directional, mono-energetic gamma-ray beam of unit intensity. It was demonstrated that average dose rate due to an isotropic point source at arbitrary positions can be well approximated using the library with acceptable error. Thus, the library can be used for efficient analysis of radiation streaming due to arbitrary distributions of gamma-ray sources.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.4
• /
• pp.293-301
• /
• 2016

Stability of cylindrical liquid storage tanks under seismic excitation could prevent catastrophic disaster of human life and economic loss. Domestic provisions on allowable compressive stress in tank walls to prohibit buckling failure are either incomplete or inconsistent, so foreign specifications such as API 650, BS EN 1998-4:2006 or New Zealand Standards are employed in stability design. In this study, response spectrum analyses are performed for plant tanks having different ratios of height to diameter or diameter to thickness to calculate hydrodynamic pressure on tank walls. Then nonlinear buckling analyses are conducted to estimate magnitude of buckling stress. By comparing analysis results with those from foreign design specifications, appropriate domestic design provisions are suggested.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.215-222
• /
• 1996

원전 격납구조물의 구조해석에 대한 대부분의 연구에서 격납구조물을 축대칭으로 모델하고 있다. 따라서 격납구조물에 배근된 강재도 축대칭으로 가정하는 것이 일반 적이며, 유한요소모델 구성시 강재는 2절점 트러스나 1절점 링 트러스요소에 의해서 모델한다. 이때 유효철근비는 트러스요소의 단면적에 의해서 표현되며, 원통형 벽체에서는 높이에 따라 배근된 강재량이 일정하므로 실제와 근접한 모델이 가능하다. 그러나, 상부돔의 축대칭모델시 돔의 자오선 방향으로 규정된 강재량이 일정치 않고, 변화하게 된다. 기존에 연구에서는 이러한 강재량의 변화를 고려하지 못하고 반경방향으로 일정한 것으로 가정하여 구조해석을 수행하여 왔다. 이와같은 모델상의 제약으로 인해서 철근이나 텐던의 조기항복, 돔 정상부 부근에서의 부 정확한 변형특성을 보이고 있다. 본 연구에서는 실제 규정된 강재량을 유한요소모델에 반영하기 위해 정점부에서 자오선 방향으로 변화되는 강재량을 모델할 수 있는 기법에 대해서 연구하였으며, 연구결과를 바탕으로 격납구조물의 극한 내압해석을 수행하여 기존 모델방법에 의한 해석결과와 비교하였다.