• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.131-136
• /
• 2008

The characteristics of the flowfields around two circular cylinders in various arrangements were investigated by PIV. In tandem arrangement, the Strouhal numbers measured in the rear region of the cylinder of wake side were decreased with the space ratios, the flow between two cylinders was almost stagnated and the closer to upstream cylinder, the larger the width of the stagnated region was. The direction of vortex between two cylinders was opposed each other with the small difference(${\alpha}$=${\pm}1.0^{\circ}$) of the attack angle . In side by side arrangement, the flow velocity between two circular cylinders were increased with the space ratios.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1518-1528
• /
• 1993

The wake-induced vibration and proximity-induced vibration of two interfering circular cylinders in tandem are investigated experimentally, using an elastically supported cylinder and a fixed cylinder in uniform crossflow. Dynamic responses and flow periodicity in wake are measured to investigate the effect of system parameters on aerodynamic instability. The parameters include the free stream wind velocity and the position of two interfering circular cylinders. The oscillating behavior of the amplitude of the elastically supported cylinder is changed by varying the position, the relative gap spacing between two interfering circular cylinders and the reduced velocities. In small gap spacing between the elastically supported cylinder located to upstream and the circular cylinder fixed to downstream, the fluidelastic instability is founded. The vibration amplitude decreases notably as gap spacing between two interfering circular cylinders becomes large. The dynamic behavior at g/D-4.0 is similar to that of the single circular cylinder.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.3
• /
• pp.87-95
• /
• 2002

원주의 항력 감소와 원주 주위 유동의 제어에 대하여 실험적으로 연구하였다. 원주 주위 유동을 제어하기 위하여 작은 제어봉을 원주 전방에 설치하였다. 실험시 원주 직경(D=30mm)에 기초한 레이놀즈수는 $Re=2 {/times} 10^4$이었다. 제어봉의 직경(d)은 4mm, 5mm, 6mm, 7mm로 변화시켰으며, 원주와 제어봉 사이의 거리(L)를 조절하면서 원주의 표면압력분포와 후류속도를 측정하였다. 제어봉으로부터의 와 유출이 사라지는 임계거리 (critical distance) $ L_C$는 $ L_C$ /D=1.5+0.83d이었는데, $ L_C$를 전후로 유동특성과 항력값이 크게 바뀌었다. 특히 원주와 제어봉 사이의 거리가 임계거리보다 짧은 경우에는 항력이 감소하다가 $ L_C$보다 크게 되면 증가하는 경향을 보였다. 제어봉의 직경이 d/D=0.233인 경우, L/D=2.013의 조건에서 원주는 약 29%의 항력 감소를 보였고, 전체 항력은 L/D=1.833조건에서 약 25% 항력이 감소하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.264-270
• /
• 2011

The Characteristics of the flowfield around three circular cylinders in tandem arrangement was investigated by PIV. Strouhal numbers, vorticity, velocity vectors and velocity profiles were observed at centre-to-centre space ratios of P/D=1.25~3.75, and Reynolds number of Re=$3.0{\times}10^3{\sim}5.0{\times}10^3$. As the results the Strouhal numbers measured in the rear region of 3rd the cylinder were distinguished three kind of regions with the space ratios and The flow pattern in the wake of each cylinder was different according to these regions. The time averaged flow at region of each cylinder was almost stagnated and the size of the stagnated region was small in order of 1st, 2nd and 3rd cylinder. The direction of vortex at the front and rear region of 2nd cylinder was opposed each other with the small difference(${\alpha}= {\pm}5^{\circ}$) of the attack angle ${\alpha}$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.198-204
• /
• 2016

The characteristics of the flow field of a circular cylinder having a small vertical plate at the upstream side are investigated by measuring the fluid force on the circular cylinder and by visualizing the flow field using particle image velocimetry. The experimental parameters are the width ratios (H/B = 0.2-0.6) of the vertical plates to the circular cylinder's diameter, and the gap ratios (G/B = 0-3) between the circular cylinder and the vertical plate. The drag reduction rate and Strouhal number of the circular cylinder increased and then decreased with G/B in the case of the same H/B. The drag reduction rate increased with H/B in the case of the same G/B. In the case of a circular cylinder having a small vertical plate, the stagnation regions are represented on the upstream and downstream sides of the circular cylinder, and the size of that region on the upstream side increased with H/B.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.83-88
• /
• 1996

두 인접한 원주 유동장을 입자 영상 속도계를 이용하여 연구하였다. 실험은 회류수조에서 행하였다. 흐름방향에 평행하게 배치하는 방법과 직교배열의 두가지 방법으로 원주를 배열하였다. 연구 결과는 다른 연구자의 결과와 일치함을 보여주었다. 본 연구를 통하여 입자 영상 속도계를 이용한 유동장 해석이 대단히 효과적임을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.76-83
• /
• 2010

The Characteristics of the flow field through cylinders with in-line and staggered arrangements were calculated by vortex method. Vortex distributions and velocity profiles around the cylinders with in-line and staggered arrangements were simulated at the pitch ratio of Pt/D=1.25~2.0 and Reynolds number of Re=$4.0{\times}10^1{\sim}4.0{\times}10^4$. As the results the vortices of clockwise at the upper separation point cylinder and the vortices of anticlockwise at the lower separation point of each cylinder were generated at both in-line and staggered arrangements. The generation of the reverse flow in the rear region of the cylinders was caused by the pitch ratio and Reynolds number, the boundary region was at the pitch ratio of Pt/D=1.5 and Reynolds number of Re=$4.0{\times}10^2{\sim}4.0{\times}10^3$ in case of in-line arrangement and was at the pitch ratio of Pt/D=1.4 and Reynolds number of Re=$4.0{\times}10^1{\sim}4.0{\times}10^2$ in case of staggered arrangement.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.89-95
• /
• 1996

The flow field around four cylinders for various angles was investigated utilizing particle image velocimetry(PIV) technique. Flow field was recorded by video camera first. Then application of PIV technique was done to the flow field. The results turned out to be useful to analyze complex flow field around multiple cylinders.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.9
• /
• pp.751-759
• /
• 2015

In this study, we investigate the Characteristics of the flowfields of a circular cylinder having a small triangular prism at the upstream side. We measure the fluid force on the circular cylinder and obtain a visualization of the flow fields using particle image velocimetry (PIV). The experimental parameters employed were the width ratios (H/B = 0.2~0.6) of the triangular prisms to the circular cylinder's diameter, and the gap ratios (G/B = 0~3) between the circular cylinder and the triangular prism. We observed that the drag reduction rate and Strouhal number of the circular cylinder increased and then decreased with G/B in the case of the same H/B. The drag reduction rate increased with H/B in the case of the same G/B. In the case where the circular cylinder had a small triangular prism, the stagnation regions were represented in the upstream and downstream sides of the circular cylinder.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.373-381
• /
• 2016

In this study, we investigate the characteristics of the drag reduction of a circular cylinder having a detached splitter plate at the wake side. We measure the fluid force on a circular cylinder and visualize the field using particle image velocimetry (PIV) with a high Reynolds number, Re = 10,000. The experimental paraeters used were the width ratios (H/B = 0.5~1.5) of splitters to the prism width and the gap ratios (G/B = 0~2) between the prism and the splitter plate. The drag-reduction rate of the circular cylinder increased with H/B in the case of the same G/B, and it increased and then decreased with G/B in the case of the same H/B. The vortices of the opposite direction on the upper and lower sides of the detached splitter plate were generated by installing the plate. Reverse flow was caused by the vortices at the wake region of the circular cylinder, and the drag of the circular cylinder was decreased by the reverse flow.