• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.444-453
• /
• 2011

VO(II), ZrO(II), Hf(IV), $UO_2$(II), Sn(II), V(V)$O_3$, Ru(III), Cd(II), Ho(III) and Yb(III) complexes of N'-(2-hydroxybenzyl)-2-(phenylamino)acetohydrazide ($H_2L^1$, 1) and N'-((3-hydroxy-naphthalen-2-yl)methylene)-2-(phenylamino)-acetohydrazide ($H_2L^2$, 13) have been synthesized and characterized by elemental analyses, $^1H$ NMR, IR, UV-Vis, conductance, thermal analyses (DTA and TG). The spectral data showed that the ligands behave as neutral bidentate, monobasic bidentate, monobasic tridentate or bibasic tridentate ligand bonded to the metal ions through the azomethine nitrogen atoms, phenolic hydroxyl group in protonated or deprotonated form and enolic or ketonic carbonyl group. The ligands and their metal complexes exhibit higher antifungal and antibacterial inhibitory effects than parent ligands and the solution of metal ions. Most of metal complexes exhibit higher antifungal activity than standard antifungal drug (amphotricene B). It is also clear that the ligands and their metal complexes have higher antifungal activity than antibacterial activity.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.436-443
• /
• 2011

The solid complexes of La(III), Ce(III), Pr(III), Nd(III), Sm(III) and Gd(III) with 4-hydroxy-3-(1-{2-(2,4-dihydroxy-benzylidene)-amino phenylimino}-ethyl)-6-methyl-pyran-2-one ($H_2$L) derived from o-phenylenediamine, 3-acetyl-6-methyl-(2H)pyran,2,4(3H)-dione (dehydroacetic acid or DHA) and 2, 4-dihydroxy benzaldehyde have been synthesized and characterized by elemental analysis, conductometry, magnetic susceptibility, UV-visible, FT-IR, $^1H$-NMR, X-ray diffraction, thermal analysis study, and screened for antimicrobial activity. The FT-IR spectral data suggest that the ligand behaves as a dibasic tetradentate ligand with ONNO donor atoms sequence towards central metal ion. From the microanalytical data, the stoichiometry of the complexes has been found to be 1:1 (metal: ligand). The physico-chemical data suggests distorted octahedral geometry for La(III), Ce(III), Pr(III), Nd(III), Sm(III) and Gd(III) complexes. The X-ray diffraction data suggests monoclinic crystal system for La(III) and Ce(III) and orthorombic crystal system for Pr(III) and Nd(III) complexes. Thermal behavior (TG/DTA) of the complexes was studied and kinetic parameters were determined by Horowitz-Metzger and Coats-Redfern methods. The ligand and its metal complexes were screened for antibacterial activity against Staphylococcus aureus, Escherichia coli, Bacillus Sp. and fungicidal activity against Aspergillus Niger, Trichoderma and Fusarium oxysporum.

• Journal of Aquaculture
• /
• v.18 no.1
• /
• pp.45-51
• /
• 2005

The optimum salinity and the effects of rapid salinity change on oxygen consumption and ammonia nitrogen excretion were examined in River Puffer Takifugu obscrus (total length 9.5$\pm$0.9 cm, total weight 18.7$\pm$5.4 g). Fish examined at the different transfer medium salinity (2, 12, 22 and 32 psu) after 2 months of acclimation period at each salinities. The routine metabolic rates of River puffer are shown as parabola equation, $Y=-0.0873X^2+0.6384X-0.690$ for oxygen consumption and $Y=-2.1667X^2+7.1672X+31.999$ for ammonia nitrogen excretion with the salinity medium at 2, 12. 22 and 32 psu. The oxygen consumption and ammonia nitrogen excretion of River puffer trans-ferred to the low salinity medium (2 and 12 psu) showed significantly difference in each salinities rearing groups than to salinity of 22 and 32 psu. Fish has a diurnal rhythm in relate to feeding, it was showed that the peak of oxygen consumption appeared at 3 hours after feeding and the ammonia nitrogen excretion rate reached maximum 4 hours after feeding. These results may indicate that the optimum salinity for rearing of River puffer is 22 psu based on growth and feed conversion ratio. The rapid change of medium salinity had no effects on the oxygen consumption and nitrogen excretion in River puffer based on this experiment.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.194-200
• /
• 1999

Grinding aid is a necessary unit operation when the raw materials are handled in solid form, and the purpose is to improve the bioavailability by reducing the particle size. For the particle design of pefloxacin, the dry planetary ball-mill was used. With the drying process, 330 g of zirconia ball with its size of 2 mm in diameter and 10 g of pefloxacin were transferred to the pot and mixed well. The mixture was ground at 112 rpm (60 Hz) for 15, 30, and 60 min, respectively. The most satisfactory grinding products were generated at 15 min of grinding time for their particle size. The volume mean diameter $\X_50$ of the grinding products was 2.97 $\mu$m. X-ray diffraction (XRD), differential scanning calorimeter (DSC), and infrared spectroscopy (IR) patterns were relatively unchanged before pulverizing pefloxacin and in the progress of grinding. Thus, these results suggest that this pulverizing method can be used for grinding products without evident effect on stability of the drug pefloxacin. Dissolution test was carried out to set up the optimal detective condition against residual antibacteria of fish by HPLC. The grinding pefloxacin for 15 min is most effective in dissolution test.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.164-170
• /
• 2004

Liquid Injection Nozzle(LIN) tube and Calandria tube(CT) in pressurized Heavy Water Reactor (PHWR) are .ross-aligned horizontally. These neighboring tubes can contact each other due to the sag of the calandria tube resulting from the irradiation creep and thermal creep, and fuel load, etc. In order to judge the contact which might be the safety concern, the remote field eddy current (RFEC) technology is applied for the gap measurement in this paper. LIN can be detected by inserting the RFEC probe into pressure tube (PT) at the crossing point directly. To obtain the optimal conditions of the RFEC inspection, the sensitivity, penetration and noise signals are considered simultaneously. The optimal frequency and coil spacing are 1kHz and 200mm respectively. Possible noises during LIN signal acquisition are caused by lift-off, PT thickness variation, and gap variation between PT and CT. The simulated noise signals were investigated by the Volume Integral Method(VIM). Signal analysis on the voltage plane describes the amplitude and shape of LIN and possible defects at several frequencies. All the RFEC measurements in the laboratory were done in variance with the CT/LIN gap and showed the relationship between the LIN gap and the signal parameters by analyzing the voltage plane signals.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.81-89
• /
• 1994

Ti film of lOnm thickness and Co film of 18nm thickness were sequentially e-heam evaporated onto Si (100) substrates. Metal deposited samples were rapidly thermal-annt.aled(KTA) in thr N1 en vironment a t $900^{\circ}C$ for 20 sec. to induce the reversal of metal bilayer, so that $CoSi_{2}$ thin films could be formed. The sheet resistance measured by the 4-point probe was 3.9 $\Omega /\square$This valur was maintained with increase in annealing time upto 150 seconds, showing high thermal stab~lity. Thc XRII spectra idrn tified the silicide film formed on the Si substrate as a $CoSi_{2}$ epitaxial layer. The SKM microgr;iphs showed smooth surface, and the cross-sectional TKM pictures revealed that the layer formed on the Si substrate were composed of two Co-Ti-Si alloy layers and 70nm thick $CoSi_{2}$ epl-layer. The AES analysis indicated that the native oxide on Si subs~rate was removed by TI ar the beginning of the RTA, and Ihcn that Co diffused to clean surface of Si substrate so that epitaxial $CoSi_{2}$ film could bt, formed. In thc rasp of KTA at $700^{\circ}C$. 20sec. followed by $900^{\circ}C$, 20sec., the thin film showed lower sheet resistance, but rough surface and interface owing to $CoSi_{2}$ crystal growth. The application scheme of this $CoSi_{2}$ epilayer to VLSI devices and the thermodynarnic/kinetic mechan~sms of the $CoSi_{2}$ epi-layer formation through the reversal of Co/Ti bdayer were discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.403-414
• /
• 1994

Nonlinear analysis of RC containment structure under thermal load and pressure is presented to trace the behaviour after an assumed LOCA. The temperature distribution varying with time through the wall thickness is determined by transient finite element analysis with the two time level scheme in time domain. The layered shell finite elements are used to represent the containment structures in nuclear power plants. Both geometric and material nonlinearities are taken into account in the finite element formulation. The constitutive relation of concrete is modeled according to Drucker-Prager yield criteria in compression. Tension stiffening model is used to represent the tensile behaviour of concrete including bond effect. The reinforcing bars are modeled by smeared layer at the location of reinforcements accounting elasto-plastic axial behaviors. The steel liner model under Von Mises yield criteria is adopted to represent elastic-perfect plastic behaviour. Geometric nonlinearity is formulated to consider the large displacement effect. Thermal stress components are determined by the initial strain concept during each time step. The temperature differential between any two consecutive time steps is considered as a load incremental. The numerical results from this study reveal that nonlinear temperature gradient based on transient thermal analysis will produces excessive large displacement. Nonlinear behavior of containment structures up to ultimate stage can be traced reallistically. The present study allows more realistic analysis of concrete containment structures in nuclear power plants.

• Progress in Medical Physics
• /
• v.6 no.2
• /
• pp.51-60
• /
• 1995

Lithium Fluoride (LiF; TLD-100) crystal chips are normally used as thermolu minescence dosimeters (abbreviated as NC-100) for estimating the absorbed dose to the skin of a patient or in a solid water phantom undergoing radiotherapy with megavoltage photon (6 and 15MV) beams. In general, investigation has revealed a reduction in the sensitivity of NC-100 chips after many runs through heating cycles. A TLD-100 chip laminated with gold plate (140${\mu}{\textrm}{m}$) on the upper surface layer of its face toward the photon beam (abbreviated as GC-100) has properties different from that of a NC-100 chip activated by incident photons and contaminant electrons with various lower energies coming from the gantry head and air. Activation of the valence band electrons of GC-100 chips by incident photons, positrons and electrons-which come from the gold plate by mainly pair production process and partly from Compton scattering-results in more enhanced signal intensity, higher response per monitor unit, as well as a good linearity with monitor units and independence of dose rate. Since the electron beams (6 and 15 MeV) do not have the probability of pair production process with gold plate, there is only a small difference (about a 3.3％ increase for 15 MeV) in the signal gaps in the TL readout for electron beams between GC- and NC-100 chips. The 3.3％ increase is entirely due to the buildup caused by the 140 m gold plate. The sensitivity of GC-100 chips is much more susceptible to high energy photon beams than electron one because of pair production. The interaction of high energy photon with a material of high atomic number, such as the good plate in this case, results in a considerably significant probability of pair production. The gold plate on the NC-100 chips acts as not only an intensifier of their signals but also acts as a filter of contaminant electrons in therapeutic high energy X-ray beams.

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.417-424
• /
• 1993

Eight-coordinate tetrakis molybdenum(IV) complexes containing 5,7-dichloro-8-hydroxyquinolinol(Hdcq) and 2-mercaptopyrimidine(Hmpd) has been prepared. $Mo(mpd)_4$, $Mo(dcq)(mpd)_3$, $Mo(dcq)_2(mpd)_2$, $Mo(dcq)_3(mpd)$ and $Mo(dcq)_4$ complexes have been isolated by thin-layer chromatography on silicagel plates. These complexes have been charaterized by $^1H-nmr$ spectrum and UV-Vis. spectrum. The chemical shift values of the protons ${\alpha}$ to the nitrogen in the ligands are shifted to down field. The relative intensities of the peaks which are positioned at the same proton of $Mo(dcq)(mpd)_3$ and $Mo(dcq)_3(mpd)$ are observed in 2:1 ratio, in case of $Mo(dcq)_2(mpd)_2$ appears in approximately a 1:1 ratio. The stereochemistry of the complexes in discussed in terms of their nmr spectrum and Orgel's rule. By vertue of the intensities (${\varepsilon}$>10,000~25,000) the low energy($16,600{\sim}19,800cm^{-1}$) bands are observed for the electronic spectra of the complexes are assigned as charge transfer bands.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.100-105
• /
• 2013

With the export of commercial nuclear power plants to UAE and that of a research reactor to Jordan, as well as the additional construction of domestic nuclear power plants, the demand of nuclear manpower is expected to increase sharply. Accordingly, nuclear manpower development is recently becoming an important issue. Major institutes involved in nuclear programs are well equipped with education and training procedures and resources. However, small and medium sized businesses have difficulties to educate their employees due to their limited resources and capacity for the education. Addressing the difficulties, this study is intended to develop and education course in accordance with the "Systematic Approach to Training (SAT)". For this, a survey is conducted on the need of education in small and medium sized businesses, based on which a pilot course on the basics of radiation is developed and operated. An assessment on the development and operation using a survey regarding participants response has shown high grades of performance, i.e. above 4.0 points (full mark: 5.0 points) on each level of expectancy, satisfaction and lecturers' capacity. The experience from this study will be used to develop other programs of nuclear power and ASME code, which are also identified from the need analysis.