• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.375-381
• /
• 2018

As smart home network services such as home CCTV, outdoor control of home appliances, home security and disaster prevention services become popular, there appear various affiliated products including smart home gateway and smart speaker. Since those services are generally developed on the vendors' individual hardware and software platforms, it is not much expected for them to interwork well among different architecture and communication methods. In this paper, we propose a new home network service system running on an open source platform to address such issues. We implemented a home network system using OpenWRT-based wireless router(or access point) and Zigbee communication technology. In the proposed system, a wireless router replaces a commercial home gateway and small control units implemented with Arduino control electronic devices and sensors in home. Several service scenarios are also implemented to verify the operability of the proposed system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.179-185
• /
• 2014

In this paper, a quadruped walking pet robot for human-robot interaction, a robot-controller using a smart phone application program, and a home smart control system using sensor informations providing from the robot are described. The robot has 20 degree of freedom and consists of various sensors such as Kinect sensor, infrared sensor, 3 axis motion sensor, temperature/humidity sensor, gas sensor and graphic LCD module. We propose algorithms for the robot entertainment: walking algorithm of the robot, motion and voice recognition algorithm using Kinect sensor. emotional expression algorithm, smart phone application algorithm for a remote control of the robot, and home smart control algorithm for controlling home appliances. The experiments of this paper show that the proposed algorithms applied to the pet robot, smart phone, and computer are well operated.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.286-293
• /
• 2022

Recently, the importance of elemental technologies constituting smart factories is increasing due to the 4th Industrial Revolution, and simulation is widely used as a tool to learn these technologies. In particular, PID control is an automatic control technique used in various fields, and most of them analyze mathematical models in certain situations or research on application development with built-in controllers. In actual educational environment requires PID simulator training as well as PID control principles. In this paper, we propose a model that enables education and practice of various PID controls through 3D simulation. The proposed model implemented virtual balls and Fan and implemented PID control by configuring a system so that the force can be lifted by the air pressure generated in the Fan. At this time, the height of the ball was expressed in a graph according to each gain value of the PID controller and then compared with the actual system, and through this, satisfactory results sufficiently applicable to the actual class were confirmed. Through the proposed model, it is expected that the rapidly increasing elemental technology of smart factories can be used in various ways in a remote classroom environment.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.2
• /
• pp.29-37
• /
• 2012

An experiment for an optimized automatic greenhouse environment in a flower farming greenhouse by building a ubiquitous sensor network with various sensors was conducted and the results were evaluated. And various culturing environmental information and data in the greenhouse were collected and analyzed. Then, the greenhouse was designed to maintain the best culturing environment on the basis of existing recommended optimized figures. By measuring the growth of the crops in the greenhouse, A system which controls facilities in the greenhouse to maintain the best culturing environment in accordance with change in the environment was analyzed.Computer simulation result proced that we discovered that controlling the facilities and the artificial light source increased production, enhanced quality, reduced labor and heating cost immensely. The experiment has proved that the u-flower farming system can maximize the income of farm families by sending warning messages to users of this system when weather suddenly changes so that users may cope with such changes and maintain the best culturing environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1208-1213
• /
• 2006

A micro embedded did the task to be simply the sequent at the past. The necessity of an embedded operating system did not exist in the reason. We satisfy the complication of the system and operating system have been desired for the officer of the process. The necessity of the process of real-time processing increased also with fast response time to users, The porting follows and have been composed of an real-time embedded operating system. We can control the control unit with the sensor to be established in the building, An embedded web sever to use the resource of the at least is appering a networking facility of interaction. In this paper, The web sever to be implemented in a purity software. We draw data for the thing to implement overall demo to the remote through Internet and We put the point even though we organized the frame to control this. we have successfully ported linux on an embedded system, which is based on intel StrongARM SA-1110 processor, then written several network modules of ethernet-based network device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.629-631
• /
• 2015

Recently, the actual demand for electricity usage to out of demand forecasting demand appears to be based on the power of Government to address the insecurity is there are a lot of efforts on a more efficient energy management. In 2011, the first major outage, blackout since the current rate of no more than 10% of our power plants, such as power supply and demand crisis is being repeated. In addition, energy management systems, the demand for care and social areas are being expanded. In this paper, Building power supply and wired/wireless router and to optimize the DDNS (Dynamic Domain Name Service) for remote control and monitoring device for electric consumption Presonal Energy Management System offers a way to implement it. In the future, remote control and access the user's can minimize the settings for additional research is needed.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.592-603
• /
• 2019

This study is about the implementation of low energy sewage management technology through effective control of blower which consumes the most energy in sewage treatment. In calculating the amount of oxygen required for microorganisms, unlike the existing method using the operating index in the bioreactor or TMS data in the discharge port, the CODcr and NH₄⁺-N concentration changes in sewage flowing into the sewage treatment plant were detected in advance before entering the bioreactor and the amount of air was controlled based on this. The pre-sensing was found to have a high correlation compared with conventional products. As a result of blower control, it was possible to save about 9.9% energy more than the manual control. Consequently, this study suggested the possibility of blower's real-time control combined with pre-sensing technology. Also, it is expected that the low energy sewage treatment can be applied to sewage treatment facilities dependent on operation by manpower, and it will contribute to the reduction of greenhouse gas emissions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.51-55
• /
• 2007

Generally, PLC (Power Line Communication) based home automation devices such as wall switch, walt socket, gas controller, etc, must maintain wake-up status at all time to control other electronic devices and monitor their on/off status whether they are in service or not. In order to reduce the unnecessary energy consumption during the standby mode, the new power-saving PLC 2 ports wall switch has been developed, separating PLC communication part and controller part and introducing sleep mode. In addition, to expand life cycle of PLC product and to reduce the rate of product failure in active mode, the instant controlling method in controlling process is adopted instead of the maintenance controlling method. In comparison to the earlier model, the new 2 ports PLC wall switch has reduced power by 0.95[W] less in standby mode and 3.2[W] less in active mode than the previous one.

• Radiation Oncology Journal
• /
• v.25 no.4
• /
• pp.213-218
• /
• 2007

Purpose: To analyze retrospectively the outcome of postoperative radiation therapy with or without concurrent chemotherapy for curatively resected stage II pancreatic cancer with T3 or N1 disease. Materials and Methods: Between January 1996 and December 2005, twenty-eight patients completed adjuvant radiation therapy at Ajou University Hospital. The patients had either pathologic T3 stage or N1 stage. The radiation target volume encompassed the initial tumor bed identified preoperatively, resection margin area and celiac nodal area. In the case of N1 patients, the radiation field extended to the lower margin of the L3 vertebra for covering both para-aortic lymph nodes bearing area. The median total radiation dose was 50 Gy. Ten patients received concurrent chemotherapy. Results: Thirteen patients (46%) showed loco-regional recurrences. The celiac axis nodal area was the most frequent site (4 patients). Five patients showed both loco-regional recurrence and a distant metastasis. Patients with positive lymph nodes had a relatively high probability of a distant metastasis (57.1%). Patients that had a positive resection margin showed a relatively high local failure rate (57.1%). The median disease-free survival period of all patients was 6 months and the 1-and 2-year disease free survival rates were 27.4% and 8.2%, respectively. The median overall survival period was 9 months. The 2-and 3-year overall survival rates were 31.6% and 15.8%, respectively. Conclusion: The pancreatic cancer patients with stage II had a high risk of local failure and a high risk of a distant metastasis. We suggest the concurrent use of an effective radiation-sensitizing chemotherapeutic drug and adjuvant chemotherapy after postoperative radiation therapy for the treatment of patients with stage II pancreatic cancer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.6
• /
• pp.357-364
• /
• 2014

In this paper deals with PON Remote monitoring solution using Reflecting Filter. The current FTTH-PON can not be monitored in real time that Optical cable fault and Quality degradation of Splitter. To solve this problem, Monitoring can make Feeder Network and Splitter that Reflecting filter development using the basic structure of Fiber Bragg grating. Reflecting Filter is Quality Monitoring System shall provide tools for user to view and analyze degradation of cables and splitter in particular predict any gradual component degradation(Optical cable bending, splice, connector, etc) before it becomes service impacting. The Reflecting Filter solution is splitter down and confirm the fault location of optical cable and it will send central control station can be monitored system an alarm to the OLT. In other words, wavelength side branches Mating existing communication affairs (Coupler) using the core of one optical wavelength for live monitoring two wavelengths and sends the subscriber side modem and aggregation switch device remotely using a reflective optical line filter monitoring the study of the system. this study can development of Reflecting filter improve the average processing time of Optical cable fault and efficient Maintenance of the network.