• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.9
• /
• pp.657-662
• /
• 2022

In this paper, the calculation using simulation and two measurement methods for G/T of the telemetry are analyzed. Antenna gain and noise temperature are calculated by using ICARA and Antenna Noise Temperature Calculator. System G/T were calculated by using Antenna gain/noise temperature, LNA gain/noise temperature, cable loss. The first G/T measurement method is Y-factor measurement method, which is to calculate G/T by comparing LNA noise temperature and a signal level difference when an antenna and a 50ohm termination are respectively connected to an LNA input terminal Second method is Solar calibration measurement method that is to calculate G/T by comparing noise level difference when looking at the sun and lowest level point. Finally, the accuracy was reviewed by comparing the G/T calculation results with the two measurement methods, and the optimal measurement method according to antenna performance and operating environment was presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.896-903
• /
• 2011

In this paper, a co-design method for JPEG2000 video compression system using DSP and FPGA is presented. By profiling the complexity of JPEG2000 algorithm, it is noticed that a MQ-coder is the most complex part. Thus, we implement the MQ-coder on FPGA for the parallel processing using VHDL to reduce the complexity. In order to verify the performance of the MQ-coder, JBIG2 standard test vector and images are used. The experimental results show that the proposed MQ-coder enhances the processing time approximately 3 times compared with the previous software MQ-coder.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1779-1780
• /
• 2006

오늘날 대부분의 감시 시스템은 유선에 의한 계측 시스템을 사용하고 있다. 하지만, 유선 감시 시스템은 흩어져 있는 많은 지점의 데이터를 측정하기 어렵고, 초기 설치시나 변경 시에 많은 비용이 소요된다. 우리나라에는 다수의 통신 기지국이 설치되어 있어, 무선 통신망의 구축이 잘 되어 있기 때문에 무선 통신망을 계측 시스템에 적용할 경우 이용하기 용이하고 계측 된 데이터를 송수신시 소모되는 비용 또한 저렴하다. 때문에, 넓게 분포되어 있는 지점의 데이터 측정에는 무선 통신망을 이용하는 것이 유선 계측 시스템의 여러 단점들을 보완할 수 있어 시스템 구성 및 관리에 유리하다. 무선 감시 시스템은 넘게 분포된 불특정 지점의 데이터를 측정할 수 있으며, 무선 통신에 기본적으로 사용되는 시간 정보를 이용하여 여러 계측기의 데이터를 동시에 측정할 수 있다. 또한 센서에서 데이터를 메인 서버로 전송하는 동작 이외에 메인 서버의 명령으로 센서에서 데이터를 취득하여 메인 서버로 재전송할 수 있는 양방향 통신의 구축 또한 용이하다. 본 논문에서는 CDMA 모듈을 통한 무선 통신을 이용하여 여러 지점의 데이터를 동시에 계측할 수 있는 양방향 통신 시스템 구축에 관하여 연구한다.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.11
• /
• pp.190-193
• /
• 1993

본 연구에서는 개인용 컴퓨터(PC), 모델(MODEM), 그리고 공중회선망(PSTN)을 이용하여 다수의 환자와 병원사이에 환자 정보 및 처방정보를 주고 받을 수 있는 시스템을 구성하였다. 시스템의 구성은 환자에게서 측정된 아나로그 신호를 Analog to Digital Converter에 의해 디지탈 신호로 변환 시킨후 공증회선망을 이용하여 의사 컴퓨터에 측정된 정보를 전해주고 의사의 처방등을 다시 공중회선망을 통해 서어비스받는 형식을 취했다. 본 논문에서는 크게 두가지 점에 초점을 두었다. 첫째로 아나로그신호인 심전도 (ECG:Electrocardiogram)를 컴퓨터에서 사용가능한 화일로 생성하고, 전송해서 치사의 모니터에 본래의 파형과 비교해 왜곡이 적은, 신호로 출력해 주는데 있고, 둘째는 거의 모든 메세지를 한글화 하였고, pull down menu 구동 방식을 채택하여 컴퓨터사용에 초보적인 사람들도 쉽게 사용할 수 있게 하였다.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.305-313
• /
• 2020

Telemetry system is a system that transmits status information data acquired from the aircraft to the ground station. PCM encoder needs memory to store channel information in order to generate a frame format using the acquired data. Generally, telemetry systems in large aircraft require much larger memory for the increased acquisition channel information due to the increased sensors and subsystems. However, they have difficulty to store all channel information in limited memory. In this paper, we suggests and implements an advanced PCM encoder that can efficiently manage memory by minimizing duplicated channel information. This novel PCM encoder allocates duplicated channel information to memory only once. And, sub commutation channels having different information for each minor frame are allocated to the memory by multiples of sub commutation channels. Finally, the suggested PCM encoder was proved by simulation that composed channels of various measurement cycles.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.142-150
• /
• 2008

In order to ensure the individual and mutual performances among the telemetry system, tracking system, flight termination system, GPS, and inertial navigation & guidance system which are installed in the KSLV-I 2nd stage and ground equipment of the Naro space center, flight test using a light airplane is required. Since the high degree of test efficiency is fulfilled through the minute plan and analysis about selection of the equipment which are applicable to the test, harness, operation strategy, and antenna installation. KSLV-I communication environment and flight profile should be precisely taken into account during the flight test. In this document, overall aspect of the KSLV-I 2nd stage equipment specification, a rack for the installation, harness, the airplane specification, and flight route which are required for the effective flight test are presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.93-100
• /
• 2006

This paper presents a multi-sensor data simulator and a data fusion algorithm for tracking high dynamic flight target from Radar and Telemetry System. The designed simulator generates time-asynchronous multiple sensor data with different data rates and communication delays. Measurement noises are incorporated by using realistic sensor models. The proposed fusion algorithm is designed by a 21st order distributed Kalman Filter which is based on the PVA model with sensor bias states. A fault detection and correction logics are included in the algorithm for bad data and sensor faults. The designed algorithm is verified by using both simulation data and actual real data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.278-283
• /
• 2000

As information communication technology developed we could check our blood pressure, pulsation electrocardiogram, SpO2 and blood test easily at home. To check our health at ordinary times is able though interlocking the house medical instrument with the wireless public data network This service will help the inconvenience to visit the hospital everytime and will save the individual's time and cost. In each house an organism data which is detected from the human body will be transmitted to the distance hospital and will be essentially applied through wireless public data network The medical information transmit system is utilized by wireless close range network It would transmit the obtained organism signal wirelessly from the personal device to the main center system in the hospital. Remote telemetry system is embodied by utilizing wireless media access protocol. The protocol is embodied by grafting CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) protocol falling mode which is standards from IEEE 802.11. Among the house care telemetry system which could measure blood pressure, pulsation, electrocardiogram, SpO2 the study embodies the ECC(electrocardiograph) measure part. It within the ECC function into the movable device and add 900㎒ band wireless public data interface. Then the aged, the patients even anyone in the house could obtain ECG and keep, record the data. It would be essential to control those who had a health-examination heart diseases or more complicated heart diseases and to observe the latent heart disease patient continuously. To embody the medical information transmit system which is based on wireless network. It would transmit the ECG data among the organism signal data which would be utilized by wireless network modem and NCL(Native Control Language) protocol to contact through wireless network Through the SCR(Standard Context Routing) protocol in the network it will be connected to the wired host computer. The computer will check the recorded individual information and the obtained ECC data then send the correspond examination to the movable device. The study suggests the medical transmit system model utilized by the wireless public data network.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.16-24
• /
• 2006

As a multi-mission GEO satellite, COMS system is being developed jointly by KARI, ETRI, KORDI, KMA, and industries from both abroad and domestic. EADS ASRTIUM is the prime contractor for manufacturing the COMS. ETRI is developing the COMS Ka-band payload and SGCS with the fund from MIC. COMS Satellite Ground Control System (SGCS) will be the only system for monitor and control of the satellite in orbit. In order to fulfill the mission operations of the three payloads and spacecraft bus, COMS SGCS performs telemetry reception and processing, satellite tracking and ranging, command generation and transmission, satellite mission planning, flight dynamics operations, and satellite simulation, By the proper functional allocations, COMS SGCS is divided into five subsystems such as TTC, ROS, MPS, FDS, and CSS. In this paper, functional design of the COMS SGCS is described as five subsystems and the interfaces among the subsystems.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.83-90
• /
• 2004

This paper describes on-board decentralized data acquisition system that acquires and encodes the numerous sensor data distributed on the big flight vehicles efficiently. The system's sub-units which have one encoder unit and several remote units were designed and simulated according to the communication protocols and the control, sequence logics based on the FPGA chip. And we have made the functional verification of the acquisition, collection and formatting of remote analog and digital data for the manufactured hardwares.