• The Research Journal of the Costume Culture
• /
• v.15 no.5
• /
• pp.852-862
• /
• 2007

This study was to investigate the physical properties and the external characteristics of denim fabrics(100% cotton non-spun denim, 98% cotton/2% polyurethane spun denim) such as tensile strength, thickness and weight, flex stiffness, surface color and shrinkage. The results of the study were as follows. After examining the change of external characteristics of before and after washing finishing for denim fabrics, denim with bio washing had increased pliability compared to denim without washing finishing but the pliability of the denim did not increase according to the intensity or frequency of washing. The luminance change according to washing finishing was high in the order of bio stone bleach washing, bio stone washing, bio washing and denim without washing finishing and the surface color became brighter in accordance with the increase of intensity and frequency of washing finishing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1169-1177
• /
• 2006

The aim of this study was to investigate the change of the weight loss, tensile strength, flex stiffness, and color-values of the pigment-dyed cotton, polyester/cotton, polyester and nylon fabrics after washing process. Pigment-dyed cotton and polyester/cotton fabrics were treated with the cellulase, of which concentrations were 0, 1, 3 and 5g/l. The time of washing process ranges from 30 to 120 minutes. Pigment-dyed polyester and nylon fabrics were treated without enzyme, of which the washing temperature were 13, 30, $55^{\circ}C$ and the washing time ranges from 30 to 120 minutes. Also, they were tested in terms of the influences of agitation speed(rpm) and additives such as softeners, enzymes, detergents. The weight loss and tensile strength of the pigment-dyed cotton and polyester/cotton fabrics were positively correlated with the concentration of cellulase and washing time. Neither polyester nor nylon fabrics exhibited any change of the weight. All fabrics showed the decline of flex stiffness and decoloration after washing process. Decoloration of cotton and polyester/cotton fabrics was due to both the influence of cellulase and the mechanical rubbing. On the other hand, that of polyester and nylon fabrics was caused by the mechanical rubbing only.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.174-177
• /
• 1998

기존의 인디고 염색 방법은 데님용 실을 여러 가닥 합하여 로프 형태로 만든 다음 정련조를 거쳐 미리 환원시켜 놓은 인디고 염액 박스 5~6개조를 빠른 시간에 통과시키면서 침지-공기 산화를 반복해 실을 링 염색시키는 방법을 사용하고 있다. 이렇게 실 형태로 링 염색시킨 인디고 선염사와 미염색사를 이용하여 제직하고 가먼트로 만든 후, 소비자가 요구하는 색상을 맞추기 위해 별도의 워싱(washing) 가공을 행하여 색상이 점차적으로 흐리게 되는 페이드 아웃(fade-out) 효과를 내는 제품으로 생산되고 있다. (중략)

• The Research Journal of the Costume Culture
• /
• v.17 no.4
• /
• pp.535-547
• /
• 2009

This study presented a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. For this purpose of this study, 6 jeans have been tested after washing finishing and we turned out appropriate shrinkage rate by evaluating the exterior of jeans and usage satisfaction. Then, a making method of jeans pattern was presented after applying the optimized shrinkage rate. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs, and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was 2.6${\sim}$5.2cm, hips circumference was 1.3${\sim}$4.2cm, thigh circumference was 0.8${\sim}$3.1cm and knee circumference was 0.7${\sim}$2.5cm. Also, hem circumference was 0.5${\sim}$1.8cm and pants length was 4.0${\sim}$6.2cm. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.461-474
• /
• 2008

The purpose of this study was to present a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. Research Method of jeans pattern was presented after applying the optimized shrinkage rate. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs, and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was $2.5{\sim}5.2cm$, hips circumference was $-1.8{\sim}2.8cm$, thigh circumference was $-1.3{\sim}2.0cm$ and knee circumference was $-1.0{\sim}1.7cm$. Also, hem circumference was $-1.0{\sim}1.8cm$ and pants length was $2.9{\sim}6.2cm$. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.3
• /
• pp.191-203
• /
• 2007

The purpose of this study was to present a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was $3.1{\sim}5.1cm$, hips circumference was $-1.2{\sim}4.2cm$, thigh circumference was $-0.9{\sim}3.1cm$ and pants length was $3.4{\sim}6.1cm$. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.7
• /
• pp.1095-1103
• /
• 2008

The effects of resin finish and dyeabilities of four kinds of Iyocell fabrics that were manufactured by four kinds of pulps were investigated. The dyeabilities of Iyocell fabrics were similar, but differed from cotton fabric. In early stage of 30 minutes, cotton fabric was shown higher dye exhaustion ratio than Iyocell fabrics, however after then cotton fabric did not increase dye exhaustion, Iyocell fabrics increased continuously. At last, the dye exhaustion ratio of Iyocell fabrics were about 75% and that of cotton fabric was 65%. Two kinds of experimental procedures were applied for Iyocell fabrics. One was what the fabrics were treated with resins and washed with cellulase, and then dyed with reactive dyes. The other procedure was the fabrics were dyed with reactive dyes, and then applied the resin treatments and cellulase washing. After fibrillation and washing the undyed Iyocell fabric and the Iyocell fabric that was dyed with C.I.Reactive Red 120, their weight loss ratios were 3.5% and 2.8%, respectively. Dyeing with reactive dyes caused the crosslinking between cellulose and dyes and the crosslinking decreased fibrillation. The weight loss by enzyme washing of Iyocell fabrics decreased by the glyoxal and melamine resin treatments. The reduction of weight loss can be caused by fibrillation decrease. Dyeing and resin treating can be showed the synergic effect on the reduction of fibrillation. The effect of glyoxal resin on the reduction of fibrillation was a little better than that of melamine resin.