• Journal of the Korea Computer Industry Society
• /
• v.10 no.5
• /
• pp.177-186
• /
• 2009

In this paper, the device multi-sensing of moving body was developed for sensing of moving body in a wide range and minute moving body. If the device multi-sensing of moving body is connected with electric lamps, it will be able to economize a electric energy in lecture rooms or office rooms.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.379-385
• /
• 2007

관성 센서는 외부 장치의 도움 없이 3차원 공간상에서 움직임 측정이 가능하다. 최근 MEMS 기술의 발달로 소형 저가 관성 센서(가속도 센서 혹은 각속도 센서) 제작이 가능해져 관성 센서를 소형 휴대 기기에 내장하여 사용자의 움직임을 감지하거나 의도 파악하는 연구가 진행되고 있다. 본 연구에서는 관성 센서가 내장된 휴대 기기를 이용하여 3차원 공간상에서 6가지 위치에 따라서 각기 다른 6가지 소리를 발생하는 가상의 멀티 타악기 시스템을 제안한다. 즉, 휴대 기기를 상/하로 흔들면 가상 타악기의 타점 위치에 왔을 때 비트 음을 발생하고, 6개의 다른 위치를 구분하여 다른 타점의 위치에서 휴대 기기를 흔들면 각각 그 위치와 미리 지정된 소리가 발생하도록 하였다. 이러한 가상의 멀티 타악기 시스템을 위해서 3차원 공간상에서 실시간으로 사용자의 움직임을 감지하고 휴대 기기의 위치를 파악하는 것이 필요하다. 저가의 관성 센서를 이용하여 사용자가 휴대 기기를 움직이는 동작이 있는 상황에서 실시간으로 휴대 기기의 위치를 추정하는 것은 쉽지 않지만 본 연구에서는 다양한 사용자의 움직임 동작 분석을 통하여 사용자가 가상의 멀티 타악기를 상/하로 흔드는 동작을 감지하고 다른 위치로 이동하는 동작을 구분하였다. 개발된 동작 감지 알고리즘과 위치 구분 알고리즘을 휴대 기기에 적용되어 실제로 가상의 타악기 시스템을 구현하였다.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.446-452
• /
• 2020

In this paper, we propose a energy-saving LED module using K-band microwave motion detecting sensor. To oscillate K-band microwave signal, An oscillator using a hairpin-type microstrip resonator was designed to increase stability and make fabrication easier. To radiate the microwave signal, a two-channel(TX/RX) patch antenna arrays was developed. Wilkinson power divider and ring hybrid mixer were developed and applied to obtain Doppler shift from the received signal. Shield cans were installed to protect the stability of the signals and unwanted external noise. The proposed motion detection sensor was mounted on a demonstration LED module and the energy saving performance through pre-test was verified.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.17-24
• /
• 2010

This paper presents calorie expenditure prediction model of daily activity of elderly living alone for LBS(Location Based Service) applications. The proposed method is to describe the daily activity patterns of older adult using PIR (Passive InfraRed) motion sensors and to examine the relationships between physical activity and calorie expenditure. The developed motion detecting system is composed of a sensing system and a server system. The motion detecting system is a set of wireless sensor nodes which has PIR sensor to detect a motion of elder. Each sensing node sends its detection signal to a home gateway via wireless link. The home gateway stores the received signals into a remote database. The server system is composed of a database server and a web server, which provides web-based monitoring system to caregivers for more effective services. The experiment results show the adaptability and feasibility of the calorie expenditure model.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.401-404
• /
• 2010

고성능 단말기와 다양한 컨텐츠가 제공되면서 제스처 기반 사용자 인터페이스에 대한 관심이 높아지고 있다. 하지만 기존의 알고리즘을 사용하기 위해서는 센서 장치를 사용하거나 사용자가 부자연스러운 장비를 착용해야 하는 경우가 많다. 본 논문에서는 카메라를 통해 입력된 영상 정보만으로 사용자가 착용한 색상 마커를 실시간으로 검출하는 알고리즘을 제안한다. 본 논문이 제안하는 마커 인식 알고리즘은 색상 감지와 움직임 감지로 나뉜다. 단일 프레임에서 영상 성분 평균을 이용한 조건검사를 통하여 색상 영역을 검출한다. 다음으로, 인접한 프레임간의 평균 영상과 현재 영상과의 차를 가중치로 이용하여 배경 범위를 설정하고 이 범위를 벗어난 영역을 움직임 영역으로 검출한다. 마지막으로 색상 검출 영역과 움직임 검출 영역을 동시에 만족하고 이웃한 픽셀들도 위 조건을 동시에 만족하면 최종적으로 사용자의 마커로 인식한다. 본 논문이 제안하는 알고리즘은 영상 정보만 사용하기 때문에 사용자는 센서나 부자연스러운 장비를 착용할 필요가 없고 일조량에 따른 조도의 변화에 강건하기 때문에 효과적인 사용자 움직임 검출이 가능하다.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.139-146
• /
• 2007

Many researches had been gone about method to track moving object using wireless sensor network. We examined tradeoffs that exist between quantity of energy and correctness of tracking, and we confirmed that can get more energy sayings through improved motion prediction method. The consumed energy in the tracking is used by sensor node for sensing the object, and tracking correctness is a differ once of actual object position from calculated value by sensing. Some tracking methods and controlling parameters causes a variation of tracking correctness and energy consuming, we can get best energy effectiveness by motion prediction algorithm. Furthermore, we get better tracking quality and energy effectiveness through using a motion prediction algorithm that consider acceleration. By the simulation, we know that if we use an accurate motion prediction algorithm, node activation range that is used for target's predicted position should be restricted to sensing range of sensor is better.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.919-926
• /
• 2023

In this paper, we implemented the surveillance camera system capable of day and night shooting. To this end, it is designed to capture clear images even at night using a CMOS image sensor as well as an IR-LED. In addition, a relatively simple motion detection algorithm was proposed through color model separation. Motions can be detected by extracting only the H channel from the color model, dividing the image into blocks, and then applying the block matching method using the average color value between consecutive frames. When motions are detected during filming, an alarm sounds automatically and a day and night motion detection system is implemented that can capture and save the event screen to a PC.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.58-63
• /
• 2015

This study suggested the mobile intelligent management system based on the cloud service. The mobile intelligent management system are composed of cloud server, middleware and sensor networks. Each modules are controlled on mobile environment and observed operating status of each apparatus for environment. In this pater, the image-based moving detection algorithm applied in order to detect an intruder and average 12.3% are measured in moving detection experiments. it was confirmed the validity of the security device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.866-869
• /
• 2015

In this paper, we propose a device for detect front object using low-price the CW Doppler sensor to prevent safety accident such as a bicycle, an electric wheelchair users. For this propose, we develop a signal process board and the object motion detect algorithm using to analyzing output signal of the CW Doppler sensor. Output signal from CW Doppler sensor is analog I and analog Q. The CW Doppler sensor shows phase I and phase Q of object differently when the object approach, stop, drop by sensor. We develop an algorithm that can detect object by discrimination information of phase using the CW Doppler sensor. The verification use firmware of applied hardware and algorithm. Then, the motion information can be confirming output depending on motion object by experiment normally. As a result, we check that the sensing information output by following motion of object and confirm an algorithm and motion of signal processing board.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.477-481
• /
• 2010

In this paper, we try to classify behavior patterns of a person around a bed based on a wireless sensor network system. We define five behavioral patterns and three states of a person around a bed which is described by a state machine. We collected data sensed by motion detection and vibration sensors installed around a bed from which a feature vector was extracted. Based on feature vector corresponding to behavioral patterns and the state machine, we established a model for behavioral patterns. To validate the model, experiments on subjects were performed and the model was fixed. These experimental results revealed that behavior patterns of a person around a bed can be classified well.