• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.196-201
• /
• 2002

The SSB(Single Side Band) communication in the 27MHz band has mainly been using between fishiery station and small fishing ship less than 10tons, but the most of small fishing ship are depend on cellular system. When accident for small ship at sea happens, It's very important to communicate continuously for preventing the collision and taking action. At present it is hard to control small fishing ship and provide information properly by using 27MHz SSB channel. Therefore in this paper We present TRS communication system applied for small fishing ship to protect the safy and life at sea and to prepare for emmergency, and also validate it's application.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.228-233
• /
• 2014

In this paper, the motion performance in waves for the training ship Kaya of Pukyong National University is obtained by using a computer program based on Strip method. To guarantee the pleasant seafaring in ocean, the vertical acceleration of ship motion is calculated according to the location of the ship. The results of calculation by changes of ship speed are compared with the guideline of MSI(Motion Sickness Incidence). The degree of motion sickness is shown and discussed through the comparison between calculated vertical acceleration spectrum and MSI guideline. The computational results of MSI were as follow; when ship speed increased in the order of 5 knots, 10 knots, 12 knots and encounter angle became the bow quartering sea of $120^{\circ}$ compared to $180^{\circ}$ and $150^{\circ}$, the vertical acceleration values grew higher.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.316-319
• /
• 2011

During the past several decades, the development of the maritime policy have been focused on the level of regulation based on the lessons from the individual accidents. Recently, the development of IMO e-navigation strategy has been discussed actively and has been focusing on the new frame and architecture based on the user requirements and definition of function and services for user requirements, which might produce the user-friendly policy, infrastructure and user service. For the new maritime ICT policy getting fusion of ICT and innovation of ship/ocean industry, the overarching methodology, as IMO e-navigation strategy, should be applied to primarily setup the architecture from the user requirements to technology. In this paper, we analyze the IMO e-navigation strategy procedure and provide the consideration and lessons for the strategic methodology to develop a new maritime ICT policy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.868-877
• /
• 2011

In this paper, the feasibility of ORBCOMM satellite-based automatic identification system (SAT-AIS) is evaluated in the context of ship AIS slot collision probability depending on reporting rate, We evaluate detection probability evaluation of ORBCOMM satellite-based AIS considering link budget, SOTDMA protocol and satellite's swath width. The simulation determines the total number of vessels served by ORBCOMM satellite according to satellite's swath width, AIS slot allocation and reporting rate. By simulation results, the ORBCOMM satellite-based AIS slot collision is increased directly proportional to the total number of vessels and the more detection probability evaluation of ORBCOMM satellite-based AIS degrader, the more sip AIS reporting rate shorter.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.607-612
• /
• 2012

In this paper, calculation methods of resistance of the ship to be towed and towline tension are discussed. When the vessel is fallen into dead ship condition then appropriate towing force have to be estimated to move the vessel from accident place to safe area. In this research, resistance of the ship to be towed and the tow hawser were considered to estimate total towline tension. Polynomial interpolation method is also applied to estimate additional hydrodynamic resistance of towline. Finally, UI program to calculate the resistance and total towline tension is developed. The developed program based on the research results is effective and convenient to use.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.116-122
• /
• 2015

Motivated by continuous increase in flight demand, awareness of the importance in developing ways to increase aircraft operational efficiency on the airport movement area has been raised. This paper proposes a new routing algorithm for providing the shortest path in a right time, enhancing the aircraft movement efficiency. Many researches on developing algorithms have been performed, for example, Dijkstra algorithm and $A^*$ algorithm. The Dijkstra algorithm provide optimal solution but could possibly provide it with a cost of relatively longer computation time. On the other hand, $A^*$ algorithm does not guarantee the optimality of a solution. In this paper, we suggest a Hybrid $A^*$ algorithm, incorporating both algorithms to eliminate the weaknesses. Rigorous test shows the proposed Hybrid $A^*$ algorithm may achieve shorter computing time and optimality in searching the shortest path.

• Journal of Advanced Navigation Technology
• /
• v.17 no.3
• /
• pp.279-284
• /
• 2013

Among the phases of flight operations pilots feel much pressure in landing segment. There is a number of factors affecting landing safety while pilots reduce aircraft speeds and make a touchdown and stop completely. If runway length is sufficient for landing, there maybe is no problem. But it is not the case all the time. So it is necessary to confirm whether landing performance is within limits or not. Required landing distance is actual landing distance demonstrated by flight test pilot plus allowances for average airline pilots. FAR(Federal Aviation Regulations) AFM certification is based upon manual landing for dry and wet runway. Other runway conditions are not the certification basis. JAR dictates even contaminated/slippery runway is included by prescribed allowances. Automatic landing is not certification basis, so actual landing distances are provided. In this paper I would like to analyze distance allowances included in each type of runway condition. In addition there is no regulation about allowances for specific runway condition, I would suggest adequate allowances for that case.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.923-929
• /
• 2019

The stability of the propulsion system is crucial for the autonomous vessel. Multiple power generation and propulsion systems should be provided for the stability of the propulsion system. High power generation capacity is calculated for stability, resulting in economical decline due to low load operation. To solve this problem, we need to optimize the power system. In this paper, an OPMS for electric propulsion ship is constructed. The OPMS consists of a hybrid power generation system, an energy storage system, and a control load system. The power generation system consists of a dual fuel engine, the energy storage system is a battery, and the control load system consists of the propulsion load, continuous load, intermittent load, cargo part load and deck machine load. The power system was constructed by modeling the characteristics of each system. For the experiment, a scenario based on ship operation was prepared and the stability and economical efficiency were compared with existing electric propulsion ships.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.100-106
• /
• 2022

Ships are built according to the purpose and operated with individual goals. Operational goals are reflected in the design of the ships and become the main criterion for determining the required ship ability. In general, cargo ships and passenger ships are objectively evaluated in terms of the operation part of the ship and the capacity part of the cargo or passenger, centering on their transportation ability. In consideration of the required ship ability, the built ship can expect effects such as economic feasibility and eco-friendliness in addition to basic characteristics such as stability. Accordingly, the concept of ship ability is expected to be effectively used in the field of training-only ship management by each institution, which plays a pivotal role in training ship-officers. In this study, the basic direction was verified for the ship ability evaluation criteria of training-only ships through the analysis of the internal space of two training-only ships of the Korea Institute of Maritime and Fisheries Technology, which were recently built with a time lag. In the process of building training-only ship or general-purpose training ship, the possibility of using the ship ability standards in securing budget and designing was derived.

• Composites Research
• /
• v.34 no.6
• /
• pp.350-356
• /
• 2021

When a ship with a planing line operates or turns in a straight line, the floating position and trim change according to the speed, and a large resistance is generated on the hull. In this paper, the resistance to a planing line was estimated through the computational fluid dynamics of a leisure boat with improved hull weight and durability by applying a carbon composite material to the hull. The resistance performance of the bow and stern of the 18ft class leisure boat was checked and the flow field of the entire vessel was estimated, and the stability of the planing line was confirmed by comparing the resistance of each trim through numerical analysis. In addition, it was confirmed that the designed planing line could withstand it sufficiently because the force applied to the hull was not large, and The stability of the boat was analyzed by calculating the wavelength of the wave and the length of the ship as the ratio of gravity to the inertial force and checking how much force the rolling occurred.