• Journal of the HCI Society of Korea
• /
• v.10 no.2
• /
• pp.13-19
• /
• 2015

Display technology has recently made enormous progress. In particular, display companies are competing each other to develop flexible display. Curved display, as a precursor of flexible display, are now used for smart phones and TVs. Curved monitors have been just introduced in the market, and are used for office work or entertainment. The aim of the current study was to investigate whether the curvature of a 42" multi-monitor affects postural control when it is used for entertainment purpose. The current study used two curvature levels (flat and 600mm). Ten college students [mean(SD) age = 20.9 (1.5)] with at least 20/25 visual acuity, and without color blindness and musculoskeletal disorders participated in this study. In a typical VDT environment, each participant played a car racing video game using a steering wheel and pedals for 30 minutes at each curvature level. During the video game, a pressure mat on the seat pan measured the participant's COP (Center of Pressure), and from which four measures (Mean Velocity, Median Power Frequency, Root-Mean-Square Distance, and 95% Confidence Ellipse Area) were derived. A larger AP (Anterior-Posterior) RMS distance was observed in the flat condition, indicating more forward-backward upper body movements. It can be partly due to more variability in visual distance across display, and hence longer ocular accommodation time in the case of the flat display. In addition, a different level of presence or attention between two curvature conditions can lead to such a difference. Any potential effect of such a behavioral change by display curvature on musculoskeletal disorders should be further investigated.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.249-252
• /
• 2000

원자력 교육원 #2(KNPEC-2) 시뮬레이터는 1980년도 중반에 웨스팅하우스에 의해 공급되어 계속 사용되어 오다가 현재 성능개선 연구가 진행 중이다. 이번 성능개선을 통해 기존의 컴퓨터 시스템(Gould MPX)와 소프트웨어의 전면 교체가 이루어지고 있으며 최적 계산 코드를 이용한 실시간 열수력 모델 (ARTS; Advanced Real-Time Thermal-Hydraulics Simulation) 개발 , 2-Group 3D 실시간 노심모델(REMARK ; REal Time Multigroup Advanced Reactor Kinetics)를 이용한 노심 주기개선 (Cycle Update) 가상현실 기술 등을 이용한 컴퓨터 교육지원 시스템(CATS: Computer Assister Training System)등 새로운 시도가 이루어지고 있으며 본 논문은 이러한 새로운 시도가 이루어지고 있으며 본 논문은 이러한 새로운 시도들 및 그 결과에 대해 기술하고 있다. 기준발전소(Reference Plant)인 영광 1호기 12주기의 노심모델로 주기개선(Cycle Update)을 위한 REMARK의 입력자료 생성을 위해 핵설계 전산체계인 APA(ALPHA-PHOENIX-ANC) 시스템의 출력으로부터 자동으로 REMARK 입력데이타를 생성하기 위한 GUI툴 개발하였다. 또 이를 이용하여 개발된 노심모델은 최적계산코드(RETRAn 3D) 의 열수력 해법을 이용하여 개발된 NSSS 열수력코드(ARTS) 와 결합(Integration) 되어 안정 및 과도 상태 시험에 사용되었으며 원자로 냉각재 펌프 정지등의 몇 가지 과도 시험 계산결과 기존 해석 결과와 잘 일치하였다 중앙제어실(MCR; Main Control Room)내의 운전원 행동만 훈련하도록 되어있는 기존시뮬레이터의 한계를 극복하기 위해 가상현실 (VR) 저작도구를 이용한 발전소 현장 내부를 표현하는 가상발전소 (Virtual Plant) 발전소 현장에 소재하여 기존 시뮬레이터의 모의한계 밖에 있던 패널을 표현한 가상판넬(Virtual Panel)등과 강의실에서 발전소 모의 훈련을 가능케 하기 위해 가상현실 기술을 이용한 컴퓨터 지원 교육훈력 시스템(CATS ; Computer Assister Training System)을 개발 중이며 일부 개발부분을 소개하였다.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.548-553
• /
• 2007

Digital convergence 및 ubiquitous 환경이 보편화되면서 computer system이 대부분의 전자 제품에 삽입되고 있다. 제품의 인터페이스는 더욱 복잡해지고 있으며, 사용 방법 또한 어려워지고 있는 상황이다. 이 중 Auto PC는 대표적인 예로, 차량 운전 환경에서 네비게이션, 음악, 동영상, DMB, PC 등의 기능을 지원하는 복합 제품이다. 이러한 제품의 사용자 인터페이스 설계를 위해서는 제품을 사용하면서 일어나는 행동들과 이들의 흐름을 이해할 수 있는 시나리오 설계에 관한 연구가 필수적이다. 인간공학 및 HCI 분야에서는 사용자 인터페이스를 설계하고 평가할 수 있는 방법론 및 도구들이 많이 소개되고 있다. 또한 이러한 방법 및 도구들을 상황에 맞게 선택하고 종합하고자 하는 연구 역시 다양하게 이루어지고 있다. 본 연구에서는 인간 중심 설계(human centered design) 방법론 중 대표적인 시나리오 기반 설계(SBD: Scenario-Based Design)과 직무분석(Task Analysis)을 이용하여 Auto PC의 인터페이스 설계에 적용해보았다. 시나리오 기반 설계와 직무분석 두 방법론을 통합할 수 있는 프로세스를 적용하였고, 그 결과 각 방법론의 단점을 서로 보완할 수 있었다. 추후 prototype을 완성하고 사용성 평가 및 만족도 조사를 통하여 설계된 인터페이스를 검증하는 연구가 진행될 예정이다.

• Journal of the Korean Institute of Gas
• /
• v.6 no.4 s.18
• /
• pp.1-7
• /
• 2002

Human errors can take place in all levels that include the design, production, construction, operation and maintenance of plant facilities. It was found that the causes were concerned with the effects of human error. This study verified characteristics of the on-site operators and error mechanism, and used the classifying sheet to analyze human error that occurred in process. Also, by applying the ASEP(Accident Sequence Evaluation Program) HRA(Human Reliability Analysis) procedure, the algorithm to estimate the HEP and the ASEP HEP program to analyze human error in the plant were developed. If it is built in on-site, possible human error incident will be prevented and the systematic human error prevention strategy will be devised.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.83-92
• /
• 2015

PURPOSES : Traffic accidents and damage due to speeding should be recognized as a problem which harms society and the economy as well as the parties to the accidents. It is time to seek more detailed and concrete customized alternatives than the existing policies for the prevention of traffic accidents. METHODS: In this study, we identified the characteristics driver behavior and psychological factors that lead to speeding, and a study was carried out to verify the causality models developed from the factors we identified. RESULTS : Driving behavior variables have a significant effect on speeding behaviors in order of Lapse, Violation, and Mistake. And the violation which is defined as intentional violation showed the result which supports the research hypothesis as it has the significant effect on speeding intention and behaviors. CONCLUSIONS: The result of this study can be utilized to develop educational problems concerning speeding and previous response with the main objective of eliminating speeding driver behavior.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.1
• /
• pp.38-44
• /
• 2021

This study aimed to verify the criteria of the driver monitoring systems proposed by UNECE ACSF informal working group and the ministry of land, infrastructure, and transport of South Korea using driving behavior data. In order to verify the criteria, we investigated the safety regulations of driver monitoring systems in a conditional autonomous vehicle and found that the driver monitoring measures were related to eye blinks times, head movements, and eye closed duration. Thus, we took two different experimental data including real-world driving and simulator-based drowsy driving behaviors in previous studies. The real-world driving data were used for analyzing blink times and head movement intervals, and the drowsiness data were used for eye closed duration. In the real-world driving study, 52 drivers drove approximately 11.0 km of rural road (about 20 min), 7.9 km of urban road (about 25 min), and 20.8 km of highway (about 20 min). The results suggested that the appropriate number of blinks during the last 60 seconds was 4 times, and the head movement interval was 35 seconds. The results from drowsy driving data will be presented in another paper - part 2.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.155-163
• /
• 2012

At present the letter sizes of traffic sign are variously designated as 22 cm through 60 cm, however the basis for determination has not been found so far. Driver's visual acuity for getting a driver licence is required higher than 0.5. In order to interpret the information of traffic signs effectively, the minimum requirement of driver's visual acuity must be applied to determine the letter size of traffic sign. Therefore we reviewed that a driver with visual acuity of 0.5 could read the current letter sizes of traffic sign. In addition, a methodology was developed to determine the letter size of traffic sign satisfied with the driver's visual acuity of 0.5. This study established scenarios that were composed of visual acuity, reaction time, the number of lane and the letter sizes of traffic sign for each scenario were proposed. Current letter size of traffic sign would not be difficult for drivers with minimum visual acuity of 0.5 to recognize the contents or information of traffic signs. The method developed in this research has an advantage that can consider a human factor like driver's visual acuity for the design of traffic signs. There is also a meaning of making a basis for the letter size of traffic sign.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.97-104
• /
• 2016

In Korea, the number of crash accident victims per 100,000 population is three times higher than the average of OECD. In particular, 60% of it occurs on the community road. Thus, this study intends to analyze the causes of such accidents through a pedestrian and vehicle traffic survey. The purpose is to establish practical safety enhancement measures for community roads. In recent years, lots of changes have occurred in the pedestrian environment. A traffic survey shows that 65% of pedestrians walk on the right and 17% of people use smart-phones while walking. An eye camera experiment shows that the operation load of drivers on the community roads is more than 4 times higher than those in urban roads. According to a speed survey, 62% of vehicles drive at 30km/h or above. The characteristics of accidents on community roads are as follows. First, the ratio of accidents on the edge of the road is 2.3 times as high as those on other roads. Second, when people walk on the right, the ratio of accidents is 2.5 times as high as that of walking on the left. Third, it becomes more dangerous when people cross the road from the right to the left. The majority of accidents is caused by unsafe driving (84.4%). When a vehicle makes a left turn, the likelihood of accidents is 2.3 times as high as those caused by a right turn. The ratio of accidents caused by vehicles going backwards is 14% among all accidents. In community roads, the focus of drivers should be at least 4 times higher than those on urban roads. Thus, walking in the opposite direction of vehicles and careless behaviors are highly likely lead to accidents.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.107-116
• /
• 2002

Crash Cushion is a kind of safety facilities on roadside which acts the role of absorbing impact energy when vehicles are driven out of normal route such as Gore area of freeway off ramp. Criteria for severity index considering accident occurrence possibility are needed to have strong effect on installing the facilities. However, present criteria for establishing crash cushion design do not include such processes. Therefore, the paper presents two kinds of study to develop criteria for severity index. First of all, development of accident forecasting model on freeway off ramp is presented. The module is a relationship between accidents and road environment by negative binomial distribution (NB) which is called to reflect very well quality of accidents at Gore of crash cushion installed freeway Secondly, freeway exiting behavior model is developed because the human factor is the most important one. However, many literatures have shown between road environment and accidents which are more quantitative than human factor. The study supposed advanced process steps on actual freeway and analysed correlation between variables and accidents. The criteria for severity index is presented to determine whether to install or not by benefit cost analysis for each module. The standard for severity index will help to determine whether to install the crash cushion or not and to estimate severity for freeway and off ramp.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.83-94
• /
• 2016

Providing a voice alarm to drivers approaching a work zone could be an effective alternative to mitigate the potential safety problems of the work zone. This study conceived a voice alarm with a direction sound speaker and a field test was conducted that evaluated the feasibility of the voice alarm at a highway work zone. During the field study, we carried out on-site driver surveys to obtain drivers' perception and preference, collected approaching speeds, and measured sound level during the off-peak 2-hour for two days, respectively. The results showed that while the voice alarm has the potential to be an effective tool in improving safety, the alternative appeared to have the negative effect of noise. Further refinement to a voice alarm with a directional speaker is required to improve feasibility, and the results are expected to be utilized as basic data useful for the refinement.