• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.139-148
• /
• 2001

본 연구는 교통사고 야기 자들의 운전정밀적성검사기록과 해당 교통사고기록을 비교하여 특정 운전적성상의 결손이 교통사고와 특정유형의 교통사고에 미치는 영향을 계량적으로 분석하는 것을 목적으로 하였다. 본 연구를 위하여 우리나라에서 가장 빈발하는 인적요인에 의한 교통사고 유형 중에서 교통상충이 빈발하는 지점에서 발생하는 차-대-차 사고를 조사분석대상으로 삼았다. 이와 같이 분석대상사고를 선정한 이유는 교통상충이 교통사고로 발전하는 과정에서 사고 제1당사자의 운전적성의 역할을 파악하고자하는 목적에서이다. 따라서 본 연구의 대상이 되는 교통사고 유형을 1. 교차로 진입부에서의 추돌사고, 2. 교차로내 충추돌사고, 3. 단일로상의 추돌사고로 선정하였다. 판별력이 의문시되는 4개 항목을 제외한 조사분석결과에서 하나의 항목을 제외하고 사고 야기자와 일반인의 운전적성상에 통계적으로 분명한 차이가 있으며 각 항목의 결손자 집단에서의 사고자 비율이 일반운전자 집단에 비해 교통사고를 경험한 확률이 2배 내지 4배 가량 높았다. 또한 특정 유형 사고 야기자와 사고 야기자 전체, 일반운전자 집단간 비교에서도 항목별 결손율이 분명한 다른 형태를 갖고 있다는 사실을 확인했으며, 특정유형의 결손(조합)자 집합에서 특정 교통사고 유형을 야기시켰을 확률이 일반인 집단에 비해 많게는 13배 적게는 3, 4배 정도 높다고 추정되었다.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.25-37
• /
• 2011

This research aimed to investigate whether commercial drivers' situation awareness ability is related to their frequency and magnitude of caused accidents and penalty points. For the purpose of measuring drivers' situation perception and interpretation capacities, two tests named 'situation awareness test' and 'hazard perception test' were developed. The tests were based on the data from 299 commercial drivers (test drivers) using a driving simulator. The outcome of drivers' performance on situation awareness and hazard perception tests was designed to be categorized into 5 grades, classifying the best as grade 1 and the worst as grade 5. As the result, low grades on situation awareness test had positive relationship with accumulated penalty points, frequency of accidents and safety index. Grades on hazard perception test were also positively correlated with accident frequency and safety indices. This suggests situation awareness ability of commercial drivers is significantly related to traffic violations and accident causing tendencies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.16-28
• /
• 2017

In this study, we analyzed the result of new inspection, accidents, penalties, and operation records of the elderly driver's driving aptitude test in the city bus using the Transport Workers Management System and the Digital Tachograph Analysis System(eTAS). As a result of the analysis, the results of the driver aptitude test were similar when compared with the traffic company which has many bus drivers and the well - And it was confirmed that the average number of serious injuries and slight injuries in case of accidents was small. Comparing the number of dangerous driving behaviors per 100 km of driving, the elderly driver of the excellent company showed that the number of dangerous driving behaviors is considerably smaller than other elderly and non - elderly drivers, and that the result of correcting the wrong driving habits.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.391-401
• /
• 2011

The Implementation Semi-Public Management System of Intra-City Bus brings improvements of the position stability, work environment and welfare of the bus drivers. As these benefits prevent drivers' job changes, average age of the drivers increases. Some side effects such as fatality increase after the implementation of the new system are becoming social problems. To minimize such problems, it is necessary to prepare the measurements reflected drivers' age increase and driving characteristics of old drivers to decrease traffic accidents of intra-city buses. The existing measurements are mostly simple policy. To get over such limitations, this study grasped driving characteristics by surveys and driving aptitude test targeting old drivers and non-old drivers who brings about traffic accidents actually. As a result, the characteristics of the old drivers were understood precisely. The measures of decrease of the traffic accidents are suggested by the analysis of the behavior characteristics of the old drivers through the structural equation model.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.622-635
• /
• 2022

Purpose: Due to the change of demography, the ratio of senior drivers has increased and the transition to a super-aged society is expected to make more seniors drive in the future. Method: In this research, we analyzed medical characteristics of the driver's age-specific decline in body function and saw that both the function of the physical as well as mental capacities deteriorates as people age. Among them, various functions are precipitously weakened after reaching 70, implying that those over the age of 70 are classified as seniors in a medical sense. In this context, we also could identify that based on such age criteria, various safety policies for senior drivers should be developed and set up in Korea. Result: We could find a steep fall in the physical function of body after reaching 70 from the chronological change of cognitive function and judgment ability. In particular, it is revealed that the driving license institution and aptitude test for drivers over 70 should be thoroughly examined, as physical functions necessary for driving such as eyesight and hearing ability is not strong enough in many drivers over 70. Conclusion: Focusing on the physical capacity to drive, we tried to find the hazardous age bracket of senior drivers which might influence driving behaviors. Going forward, we expect this work would help to understand the policies for senior drivers and drivers' physical differences.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.315-322
• /
• 2008

Valves in power plants are leaking internally by various damages including insertion of foreign objects on seat, seat crack, defects and fatigue crack of stem packing or welds etc. due to severe operating conditions such as high temperature and high pressure for extended period time. Acoustic emission(AE) technology should be applied in order to diagnose precisely and evaluate these valve internal leak. In this paper, results of studies which have accomplished in actual power plant are presented. We have analyzed background noise, AE signal level and frequency spectrum through laboratory tests on the basis of various actual conditions in power plant, and also have considered evaluation methods on the background noise, AE properties and the detectable minimum leak rate according to valve leak conditions through comparing with results of field tests in power plant. As a result of these studies, we conformed that evaluation of internal leak conditions including discrimination of leak or not, and the detectable minimum leak rate is possible, and also it is expected to contribute to safe operation and prevention of energy loss in power plants.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.184-190
• /
• 2008

Various ECT techniques have been applied basically to assess the integrity of steam generator tithing in nuclear power plant. Among these techniques, the bobbin probe technique is applied generally to examine the volumetric flaws such as a crack-like defect and wear which is generally occurred on steam generator tubing, and additionally MRPC probe is used to examine closely tile top of tubesheet and bending regions due to the high possibility of cracking. Dent and bulge also may be formed on tube during installation process and operation of steam generator, but the dent and bulge indications greater than specific size criteria are recorded on examination report because these indications are not considered as flaw. These indications can be easily detected with bobbin probe and approximately sized with profile bobbin probe, but the size and shape can not be accurately verified. Accordingly, in this study, the $8{\times}1$ multi-array EC probe was designed to increase the measurement accuracy of the sectional profiling EC testing of tube. As a result, we would like to propose the application of $8{\times}1$ multi-array EC probe for the measurement of size and shape of profile change on steam generator tube in OPR-1000 nuclear power plant.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.64-70
• /
• 2012

Two kinds of eddy current probes are mainly used to perform the steam generator tube integrity assesment in NPPs. The first one is the bobbin probe using for inspection of volumetric defect like a fretting wear. The second one is the rotating probe using for inspection of non-volumetric defect like a crack. The eddy current probe is one of the essential components which consist of the whole eddy current examination system, and provides a decisive data for the tube integrity in accordance with acceptance criteria described in specific procedures. The design of ECT probe is especially important to improve examination results because the quality of acquired ECT data is depended on the probe design characteristics, such as coil geometry, electrical properties, operation frequency. In this study, it is analyzed that the coil winding number of differential bobbin probe affects the electrical properties of the probe. Eddy current bobbin probes for the steam generator tubes in NPPs are designed and fabricated according to the results. Experiment shows that the change in coil winding number has much effects on the optimum inspection frequency determined by the tube geometry and material. Therefore, the coil winding number in bobbin probe is very important in the probe design. In this study, a basis of the coil winding number for the eddy current bobbin probe design for steam generator tubes in NPPs is established.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.110-115
• /
• 2010

This study was conducted to estimate the feasibility using thermal image measurement that is applicable to internal leak diagnosis for the power plant valve. Abnormal heating of valve surface associated with high temperature steam f10w toward valve outlet side in the condition of low temperature is a primary indicator of leakage problems in high temperature and pressure valves. Thermal imaging enables to see the invisible thermal radiation that may portend impending damage before their condition becomes critical. When steam flow in valve outlet side in the condition of low temperature is converted into heat transmitted through the valve body due to the internal leakage in valve. The existence of abnormally increasable leakage rate in the valve will result in abnormally high levels of heat to be generated that can be quickly identified with a thermal image avoiding energy loss or damage of valve component. From the experimental results, it was suggested that the thermal image measurement could be an effective way to precisely diagnose and evaluate internal leak situation of valve.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.325-330
• /
• 2004

Several kinds of low voltage cables have been used in nuclear power plants for the supply of electric power, supervision, and the propagation of control signals. These low voltage tables must be inspected for safe and stable operation of nuclear power plants. In particular, the degradation diagnosis to estimate the integrity of low voltage rabies has recently been emphasized according to the long use of nuclear power plants. In order to evaluate their degradation, the surrounding temperature, hardness of insulation material, elongation at breaking point (EAB), etc. have been used. However, the measurement of temperature or hardness is not useful because of the absence of quantitative criteria; the inspection of a sample requires turning off of the power plant power; and, the electrical inspection method is not sufficiently sensitive from the initial through the middle stage of degradation. In this research, based on the theory that the ultrasonic velocity changes with relation to the degradation of the material, we measured the ultrasonic velocity as low voltage cables were degraded. To this end, an ultrasonic degradation diagnosis device was developed and used to measure the ultrasonic velocity with the clothing on the cable, and it was confirmed that the ultrasonic velocity changes according to the degradation of low voltage cables. The low voltage cables used in nuclear power plants were degraded at an accelerated rate, and EAB was measured in a tensile test conducted after the measurement of ultrasonic velocity. With the increasing degradation degree, the ultrasonic velocity decreased, whose potential as a useful parameter for the quantitative degradation evaluation was thus confirmed.