• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3889-3894
• /
• 2012

The platform of railroad station for domestic passenger train has been operated at two categories like the platforms if low level(500mm, mainline) and high level(1,135mm, metropolitan subway line). To operate both metropolitan subway line and mainline railroad safely, it is essential to develop the doorstep equipment of railway vehicle regardless of low and high level platforms. On the other hand, the domestic test standard at durability and reliability of doorstep equipment has not been existed until now. This study aims at the development on doorstep equipment of telescopic sliding type for low and high level platforms. Durability analysis with VPD(Virtual Product Development) techniques are performed and the durability standard & qualification life through the rig test during no failure test time is examined in accordance with reliability qualification test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.102-109
• /
• 2003

The number of engines for fighters has been decided by thrust required and available engines at the time since the beginning of the jet age. However, many factors such as combat effectiveness, survivability, performance, and cost were considered as engine technology has been progressed. From the vietnam war and desert storm, a twin engine fighter was shown slight superiority to a single engine one in an vulnerability，but single engine fighters were a little predominant in susceptibility This paper includes the trade-off study results on the number of engines for the supersonic light attack aircraft with single and twin engines. Twin engine configuration is 8%, 26%, and 13% higher than single engine one in MTOGW, Flyaway Cost, and LCC respectively. Little difference has been found in RM&S, Maneuver and field performance. According to the factors above, single engine fighter is profitable for low class and twin engine one for medium and higher class.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.117-125
• /
• 2004

This paper describes the test technique for the full-scale airframe durability test according to the military handbook(MIL-HDBK-1530) and ASIP(Aircraft Structure Integrity Program) to evaluate structural integrity and to obtain basic data for IPA(Initial Production Approval) of the Korean advanced trainer(T-50). This paper covers the full-scale airframe floating setup technique, the optimized test load simulation method, test rig design technique, test setup design and installation techniques, test safety device design and operation technique, and durability test results. As 1st life durability test was successfully performed, it was confirmed that this method is available in a full-scale airframe structural test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.618-626
• /
• 2011

In order to complete missions in a complicated terrain or highly dangerous area, an unmanned aerial vehicle(UAV) needs a fine controller to precisely follow the desired path. A PID controller used for the path following feeds forward path curvature information to the control input to improve the path following performance. High gain for PID controller is necessary to follow path tightly. However the high gain could cause instability or performance degradation when the vehicle has slow dynamics. We present PID controller design method which considers response delay of vehicle as well as path curvature. In order to obtain path curvature the desired path is described as a 3rd order polynomial by applying cubic spline interpolation. We apply the proposed controller to the path following of a UAV which is operated in high altitude and has very slow lateral dynamics. The lateral dynamics are modelled as a first order delayed system in the controller design. Nonlinear simulation shows the UAV with proposed controller follows an arbitrary path very tightly.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.96-100
• /
• 2009

With the improvement of industrial society, the high quality electrical energy, simplification of operation and maintenance, ensuring reliability and safety are being required. This paper compares breakdown characteristics in $SF_6$ gas with $N_2/O_2$ Mixture gas($N_2:O_2=100$ : 0, 79 : 21, 60 : 40, 40 : 60) as using widely in High Voltage insulation equipment with the characteristics in different media which are focused on environmentally friendly gases. As an append result of research the results are fundamental data for electric insulation design of Distribution Power Facilities which will be studied and developed in the future. And we could make an environment friendly gas insulation material with mataining dielectric strength by $N_2/O_2$ Mixture gas which generates a lower lever of the global warming effect.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.821-829
• /
• 2020

Health management system of airborne software repairs runtime errors to provide safety and to reduce cost of maintenance. It is critical to on-the-fly repair order violation errors, because it is difficult to identify them at the development phase. Previous work, called Repairing Atomicity Violations (Repairing-AV) diagnoses order violations for each access event by comparing execution order of accesses. As a result, Repairing-AV has time overhead that is proportional to the number of access events to shared variable. This paper presents a tool called On-the-fly Repairing System (ORS) that can repair order violations of object methods containing access events. The ORS diagnoses order violations by using correct order of object methods, and treats them by stalling its thread where the error is about to occur. Experimentation with five synthetic programs shows that ORS is more efficient than Repairing-AV when the number of access events is greater than sixty.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.127-133
• /
• 2002

The general requirements to achieve the structural integrity of the airframe are described in the military specification, MIL-STD-1530A. One of these requirements is the durability and damage tolerance of the airframe, which should be shown through the analysis and test based on the related specifications. This paper introduces the full scale durability test to evaluate the structural safety and durability of the basic trainer, KT-1. The test was performed according to the procedure in the military specification. The flight by flight load spectrum was developed by KT-1 fatigue load criteria and used for the durability test. The durability test had been performed for 4 service lives and was completed successfully. Therefore, it was shown that KT-1 airframe satisfied the durability requirements.

• Journal of KIISE
• /
• v.43 no.8
• /
• pp.848-856
• /
• 2016

Seeking and recognizing maritime targets are very important tasks for maritime safety. While searching for maritime targets using radar is possible, recognition is conducted without automatic identification system, radio communicator or visibility. If this recognition is not feasible, radar operator must tediously recognize maritime targets using movement features on radar base on know-how and experience. In this paper, to support the radar operator's mission of continuous observation, we propose an algorithm for automatic recognition of an unknown ship using movement features on radar and a method of detecting potential ship related accidents. We extract features from contact range, course and speed of four types of vessels and evaluate the recognition accuracy using SVM and suggest a method of detecting potential ship related accidents through the algorithm. Experimentally, the resulting recognition accuracy is found to be more than 90% and presents the possibility of detecting potential ship related accidents through the algorithm using information of MV Sewol. This method is an effective way to support operator's know-how and experience in various circumstances and assist in detecting potential ship related accidents.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.89-99
• /
• 1993

원자력발전소 고장 및 불시정지 사례의 상당수가 시스템과 연계되어 인간에 의해 수행되는 운전, 유지보수, 관리와 관련된 인적오류에 기인하는 것으로 알려져 있다. 이러한 인적오류는 원자력발전소의 안전성과 효율성의 유지에 중요한 변수로 작용하며 불시정지에 의한 경제적 손실과 사회적 충격을 초래 하게 된다. 특히, 국내 원자력발전소가 외국설계라는 점과 인적요인에 대한 체계적인 평가가 이루어 지 지 않은 상태에서 운영중인 것을 감안하면, 인적요인의 국가별 차이에서 발생가능한 인적오류 유발요인 이 상존하고 있다고 할 수 있다. 이러한 인적오류의 중요성에 비해 국내 원자력 발전소의 인적오류에 대 한 연구는 지금까지 활발히 이루어지지 않고 있다. 본 연구에서는, 국내 원자력발전소에서 발생하는 인적 오류의 분석과 그 분석결과를 응용하기 위한 기술개발의 첫단계로, 기존 국외의 인적오류연구방법론 비교 분석, 국내 원전의 인적오류 발생현황 및 관련보고체계 분석, 등을 수행하여 국내 원자력발전소의 인적오류 분석 및 응용기술개발을 위한 연구개발 방향을 정립하였다. 기존 국외의 인적오류연구방법론 비교분석에서는, 인적오류에 대한 연구를 그 접근 방식에 따라 관리적 접근방식, 정량적 접근방식, 정성적 접근방식의 세가지로 분류하여, 각 접근방식에 대한 분석대상, 분석방식, 수행목적 등, 각 접근방식의 특징과 이에따른 실효성을 분석하였다. 그리고, 국내 원전의 인적오류 발생현황 및 관련보고체계분석에서는, 국내 원자력발전소에서 발생한 고장/정지 사건이 내포하고 있는 인적오류의 주요 형태를 파악하였으며, 또한, 인적오류연구 수행에 필수적인 인적오류사례원으로서 국내 원전에서의 인적오류 관련 보고체계에 대한 운용현황을 파악하고 그 유용성을 조사하였다. 이러한 연구를 통하여, 국내에 적용가능한 인적오류 분석기술개발 추진을 위한 제약 조건과 이러한 제약조건을 극복하고 인적오류 분석기술 수준을 향상시키기 위한 필요충분조건을 파악하였으며, 이 필요충분조건을 고려하여 인적오류 분석기법개발, 인적 오류 사례전파 및 자료관리 기술개발, 인적오류 사례수집 기술개발, 등을 주요 골자로 하는 인적오류 분석기술개발의 기본 방향을 설정하였다. 이와 아울러, 오류사례의 수집, 상세분석, 자료의 저장 및 응용을 위한 hardware 및 software 환경을 체계화하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.1-8
• /
• 2016

Recently, buildings tend to be large size, complex shape and functional. As the size of buildings is becoming massive, the need for structural health monitoring(SHM) technique is ever-increasing. Various SHM techniques have been studied for buildings which have different dynamic characteristics and are influenced by various external loads. Generally, the visual inspection and non-destructive test for an accessible point of structures are performed by experts. But nowadays, the system is required which is online measurement and detect risk elements automatically without blind spots on structures. In this study, in order to consider the response of non-linear structures, proposed a signal feature extraction and the adaptive threshold setting algorithm utilized to determine the abnormal behavior by using statistical methods such as control chart, root mean square deviation, generalized extremely distribution. And the performance of that was validated by using the acceleration response of structures during earthquakes measuring system of forced vibration tests and actual operation.