• Journal of the Korean Wood Science and Technology
• /
• v.14 no.4
• /
• pp.8-13
• /
• 1986

To investigate effect of sericite on pilot Fourdrinier paper making for loading, with respectively 15% additive sericite on talc, we made newprint with TMP, and then tested sericite on talc, we made newprint with TMP, and then tested sericite and talc abrasion, physical and strength properites of the paper. Consequently, as a loading materials, sericite had outstanding properties different from talc from the result of this paper; 1. Sericite was a good loading materials because the quantity of abrasion was small. 2. Sericite had a good physical properties of Foudrinier paper because brightness. ash content and water absorption were high. 3. Newsprint paper strengthes of additive talc were nigher than those of additive sericite.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.481-484
• /
• 2003

This study is intended to investigate application of mica waste(MS) to fine aggregate for mortar by comparing it with cement mortar in which crushed sand(CS) and river sand(NS) are used. According to the results, as the physical properties of aggregate, specific gravity is large in order of MS, NS and CS, absorption ratio in order of MS, CS and NS, and unit weight and solid volume percentage in order of NS, CS and MS. In the case of MS mortar, mechanical properties, drying shrinkage and heat conduction ratio are reduced, but the radiative amount of infrared light is excellent compared with NS mortar. Fluidity and unit weight of MS mortar is larger than those of CS mortar, and strength does not make differences. Length change by drying shrinkage is larger, but heat conduction ratio and radiative amount of infrared light are smaller than CS mortar. Thus, it proves that MS can be used in place of NS and CS, but its quality is deteriorated slightly.

• 전기의세계
• /
• v.22 no.2
• /
• pp.19-22
• /
• 1973

The contents of this paper are the effects of heat treatment on the breakdown strength of Amber Mica. In this study the breakdown strength of Amber Mica of which thickness is about 0.2-0.5(mm) was found to be raised by approximately 10% when it is heat treated at proper temperature and during suitable interval of time. Furthermore, both the heat-treatment temperature and time interval are higher and longer respectively within some extent, the more breakdown strength increasing effects are able to be expected. The results of this experiments are explained qualitively by the existence of contained gas, Hippel's breakdown theory in crystal solid insulator, and disorder of crystal structure.

• Economic and Environmental Geology
• /
• v.24 no.1
• /
• pp.21-25
• /
• 1991

The studied Nonggeori and Naedeogri granites in the Sangdong area intruded into the Precambrian metasedimentary rocks of the Yulri Group. The Cambro-Ordovician Choseon Supergroup overlied unconformably upon the Yulri Group. Pegmatitic dykes injected into the Yulri Group and the granites, but not in the Choseon Supergroup. Field relationships suggest approximate ages of the intrusive rocks in the studied area belong to the Precambrian. Extremely pure concentrates of muscovites(40-80#) were obtained from the granites by conventional isodynamic magnetic separators. The contents of K and 40Ar in the muscovites show 8.60-8.78% and 98.52-99.11%, respectively. From the potassium contents of the muscovites and the approximate ages, the sample amounts for argon analyses are average of 0.00371gr. The K-Ar ages on the muscovites were revealed as Proterozoic ($1673{\pm}22{\sim}1802.5{\pm}17.5Ma$).

• The Journal of Engineering Geology
• /
• v.11 no.3
• /
• pp.269-278
• /
• 2001

We describe the calculation of thermal expansion coefficients of $\alpha$-quartz, muscovite and albite using a MD simulation method. The selection of interatomic potentials is important for the MD calculation, and we used the 2-body interatomic potential function. The coefficients are calculated using a differential operation of the temperature dependence of the lattice constant obtained from the NPT-ensemble molecular dynamics simulation. Reasonable agreement is found between the analytical results and measured data.

• Journal of the Speleological Society of Korea
• /
• no.67
• /
• pp.43-51
• /
• 2005

This study on Gobongdond Wetlands have hydrogeomorpholosic charateristics in the southern-west of Gogongsan. This study area have been dissected and deep weathered. in geology, this area show banded gneiss consisting of alternated felsis and mafic layers. in geomorphology this area have 3 slope that surplyed the surface water and ground water, but have a little water source by surface water. The most of Gobongdong wetland's water sources are aquifer or confined aquifer, so this wetlands have many seepages or discharges. The characteristics of Soil have retained the wetland's water. Deep weathering made the parents soil into clay minerals.(siallitization) This clay minerals have a high water table.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.2
• /
• pp.128-137
• /
• 1994

예산-공주-청양 지역에는 여러 큰 규모의 활석 광상이 분포한다. 이 지역에서 산출되는 활석 광석은 초염기성암 기원의 사문암이 열수변질작용을 받아서 주로 생성된 것으로알려져 있으며 녹니석, 운모, 각섬석 등의 규산염 광물들은 불순물로 다량 함유하고 있다. 활성 광석에 포함되어 있는 이들 함철규산염 광물들을 분리해 내고 활석 광석의 품질을 향상시키기 위하여 고구려배자력분리방법을 실험적으로 적용함으로써 활석 광석의 정제법을 강구하고자 하였다. 활석광석을 구성하고 있는 광물들의 자기적, 광물학적 특성을 토대로 하여 인공 혼합 표준 시료와 활석 광석 시료를 준비하고 이들을 대상으로 각각 실험하였다. 정제 실험 결과 고구배자력분리기를 통과한 정광의 경우 활석의 양이 증가하였고 다른 불순광물들의 양은 현저히 감소하였으며 활석 광석의 백색도에 있어서는 대흥광산의 원광석의 경우 60.6에서 65.5로, 평안광산의 경우 61.6에서 65.0으로, 신양광산의 경우 71.2에서 74.5로 향상되었다.

• Korean Journal of Materials Research
• /
• v.14 no.5
• /
• pp.343-347
• /
• 2004

We investigated the growth feasibility of polycrystalline Si film on mica substrate for the transfer of the layer to a plastic substrate. The annealing temperature was limited up to $600^{\circ}C$ because of crack development in the mica substrate. Amorphous Si film was deposited on mica substrate by PECVD and was crystallized by furnace annealing. During the annealing, bubbles were formed at the Si/mica interface. The bubble formation was avoided by the Ar-plasma treatment before amorphous Si deposition. A uniform and clean polycrystalline Si film was obtained by coating $NiCl_2$ on the amorphous Si film and annealing at $500^{\circ}C$ for 10 h. The conventional Si lithography was possible on the mica substrate and the devices fabricated on the substrate could be transferred to a plastic substrate.

• Proceedings of the KSEG Conference
• /
• 2001.03a
• /
• pp.15-22
• /
• 2001

퇴적암의 풍화특성을 파악하기 위해서는 풍화과정을 지배하는 암석의 광물 조성과 화학성분에 대한 연구가 필요하다. 본 논문에서는 풍화정도에 따른 퇴적암의 특성을 고찰하기 위해서 대구지역에 분포하고 있는 퇴적암을 채취하여 화학 및 광물성분 분석과 시간경과에 따른 물리 및 역학특성 시험을 실시하였다. 퇴적암에 대한 풍화판정법은 시험결과 Parker의 풍화지수식이 잘 일치하였고 모암에 함유된 $Al_2$O$_3$, CaO, $Na_2$O, $K_2$O, MgO등의 화학성분과 조장석(Albite, Ab), 백운모(Muscovite, Ms), 마그네타이트(Magenetite, Mt)등의 광물성분이 풍화와 밀접한 관계가 있었으며, 또한 암석의 풍화정도와 공학적 성질에 대한 상관관계식을 제안하였다.

• Journal of Power System Engineering
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2006

This paper aims to study several type heaters which are mica heater, film heater, quartz heater and rod heater and to get an temteraturel and electrical characteristics. These four type heaters have a merit in many fields than present electric heater with nichrome wire. Carbon and mica plate heater have higher heat efficiency and less electromagnetic waves. Also it has been reported that far infrared ray emission from this heater is good for our health. Additionally heating element is thin and lighter plate. For these reasons, they will be widely used to various application such as room-heating or manufacturing goods. Experimental result confirmed that when 220V current authorized, the temperature, electric current, electric power and the resistance rise to stationary state in early stage. Moreover, the temperatures and electric characteristics show a good stability.