• Therapeutic Science for Rehabilitation
• /
• v.10 no.1
• /
• pp.95-104
• /
• 2021

Objective : In this study, we wanted to analyzed the current status of domestic senior center programs to collect data for the development of center programs for small and medium cities. Methods : To collect data, the researchers visited small and medium cities (Gyeonggi, Gyeongsang, Chungcheong, Jeolla and Gangwon) between July and September 2019 and conducted interpersonal surveys. The study involved 183 people. Results : The users mainly used senior centers 'because they of their friends' 55% indicated that they used centers four to five times a week. 45.9% were satisfied with their center, and 20.2% indicated that 'various programs' were needed to make the centers attractive. Of the non-users, 43.5% indicated that they did not use the centers for their lack of 'enjoyable' activities, and 46.5% indicated that 'various programs' should be developed to make the centers attractive. Programs favored by both users and non-users included exercise, hobbies and entertainment and health programs. Conclusion : The study show that the general factors influencing the use of senior centers by senior citizens living in small and medium-sized cities in Korea include the purpose of use, satisfaction with the program, and improvement points and limitations. Accordingly, the limitations of the existing center programs will be identified, and the findings can be used as the basis for the development of future programs.

• 한국노년학
• /
• v.25 no.2
• /
• pp.143-154
• /
• 2005

This study was conducted to examine the environmental status, FIM(Function Independence Measure), Illness intrusiveness of home stayed stroke patients. Data were collected on 145 patients living in K city and the neighborhood located in southern part of Korea. The data were analyzed by means of SPSS program. Results : In assessment of environmental safety, 46.2%(67) felt unsafe around their residential area. The most dangerous facilities in their residence was stairs(58.2%), gas/electric facilities(14.9%). For sanitary problems, 28.2%(41) felt they have problems at their home. The most important problems were outdoor polluted toilet(22.0%) and scattered and dirty residential circumstances(22.0%). The average FIM score was 74.52(4.14) of total score 126(7). In motor area FIM was lowest at stair walking(3.01) and bathing(3.16). In cognitive area FIM was lowest at social activities(3.36). The mean score of Illness intrusiveness was 58.86(4.52) of total score 91(7). The major area largely impacted by stroke were health(5.61), working(5.68), active leisure activities(5.56). There was significant reverse correlation between FIM and illness intrusiveness(r=-0.66, p=0.00). Conclusion : It was needed environmental improvement and rehabilitation program for stroke patients, and repeated follow up study.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.507-523
• /
• 2019

This purpose of study was to Analysis on Location and Service Factors Affecting the Management and Use of Judo Gym. This study aims at providing fundamental data and information on Judo coach by studying what effects of location and use factor on trainee satisfaction. The survey was done through 350 copies and excluding 11 copies ran an analysis on the remaining 339(96.8%) copies. After question investigating the data which is collected used IBM SPSS statistics 21 program, frequency analysis, Exploratory factor analysis, Cronbach's ${\alpha}$, correlation analysis, multiple regression. The result of this study were as follows. First, management, location, coach, trainee value, facility, communication in Judo gym location and use factors showed (+) effects on trainee satisfaction. Second, Program operation, Gym quit use, Whether or not to insure in management factor showed (+) effects on trainee satisfaction. Third, Coach credibility in coach factor showed (+) effects on trainee satisfaction. Forth, Member communication in communication factor showed (+) effects on trainee satisfaction. Fifth, Wholesome leisure, Athletic ability improving in trainee value factor showed (+) effects on trainee satisfaction. Sixth, main facility level, additional facility level in facility factor showed (+) effects on trainee satisfaction. Seventh, Visibility in location factor showed (+) effects on trainee satisfaction. And location type(station area, residential district, commercial area) of Judo gym showed (+) effect on management, trainee value, location, communication, facility.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.247-258
• /
• 2004

The composite shell element is developed for the solution of undamped forced vibration problem of composite curved panels. The finite element used in the current study is an 4-node enhanced assumed shell element with six degrees of freedom per node. The composite shell element is free of both shear and membrane locking phenomenon by using the enhanced assumed strain(EAS) method. A modification to the first-order shear deformation shell theory is proposed, which results in parabolic thorough-thickness distribution of the transverse shear strains and stresses. It eliminates the need for shear correction factors in the first order theory. Newmark's direct integration technique is used for carrying out the integration of the equation motion, to obtain the repones history. Parametric studies of curved composite panels are carried out for forced vibration analysis by geometrical shapes and by laminated composite; such as fiber orientation, stacking sequence.

• Journal of the Korean Chemical Society
• /
• v.59 no.6
• /
• pp.508-519
• /
• 2015

In this study, the pre-service chemistry teachers’ understanding of potential energy curve was investigated. The subjects were 24 junior students and 26 senior students studying chemistry education in a college of education. A concept questionnaire consisted of thought experiments with different initial conditions was developed to survey the pre-service teachers’ conceptions of potential energy curve. The survey results showed that the pre-service chemistry teachers had difficulties to accept the negative values for potential energy and total energy. And they knew the mechanical energy conservation but they could not apply it properly to the thought experiment situations given in the questionnaire. Also they had the knowledge about the direction of force exerted between the two balls, but many of them believed that the balls would stop moving at the bottom of potential energy curve well. In addition, it was discovered that few pre-service teachers could relate the thought experiments to the chemical bonding, the liquefaction of gas, and the molecular vibration.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1395-1401
• /
• 2014

In an effort to develop and implement an inertial balance with high performance, the response characteristics of a load cell, which are some of the critical parameters for optimal system design, were evaluated using a sample object of approximately 100 g under microgravity conditions. To this end, a 15-m drop-tower was used to produce microgravity conditions, and the response characteristics of the load cell were investigated in terms of the variations in the magnitude of the deceleration of the sample object, noting that the mass of a living animal should be determined in microgravity. An analysis of the ratio of the inertial forces clearly demonstrated that the average velocity of a load cell plate should be higher than 0.5 m/s to meet the design requirements.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.33-42
• /
• 2003

This paper deals with the FEM analysis of nonlinear sloshing of incompressible, invicid and irrotational flow in two dimensional rectangular tank. We use laplace equation based on potential theory as governing equation. For large amplitude sloshing motion, kinematic and dynamic free surface conditions derived from Bernoulli equation are applied. This problem is solved by FEM using 9-node elements. For the time integration and accurate velocity calculation, we introduce predictor-corrector time marching scheme and least square method. Also, numerical stability in tracking of free surface is obtained by direct calculation of free surface location to time variation. Numerical results of sloshing induced by harmonic excitations, while comparing with those of linear theory and references, prove the accuracy and stability. After verification of our program, we analyze sloshing response characteristics to the fluid height and the excitation amplitude.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.73-79
• /
• 2009

For the shake of control for movement object, control theory like neural network, nonlinear model predictive control(NMPC) is realized on digital high speed computer. Predictor of flight control system(FCS) based nonlinear model predictive control has to be satisfied with response for hard real-time to perform applications on each module in the FCS. Simultaneously, It gives a serious consideration accuracy to give full play to FCS's performance. Error of mathematical aspect affects realization of whole algorithm. But factors of bring mathematical error is not considered to calculate final accuracy on parameter of predictor. In this paper, Predictor was made using load control model on the digital computer for design FCS at hard real-time and is shown response time on realization algorithm. And is shown realization algorithm of high effective predictor over the accuracy. The predictor was realized on the load control model using Euler method, Heun method, Runge-Kutta and Taylor method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.437-450
• /
• 2014

In this study, we developed a methodology to determine the reference parameter for an aircraft impact induced risk assessment of nuclear power plant (NPP) using finite element impact analysis of containment building. The target structure used to develop the method of reference parameter selection is one of the typical Korean PWR type containment buildings. We composed a three-dimensional finite element model of the containment building. The concrete damaged plasticity model was used for the concrete material model. The steels in the tendon, rebar, and liner were modeled using the piecewise-linear stress-strain curves. To evaluate the correlations between structural response and each candidate parameter, we developed Riera's aircraft impact force-time history function with respect to the variation of the loading parameters, i.e., impact velocity and mass of the remaining fuel. For each force-time history, the type of aircraft is assumed to be a Boeing 767 model. The variation ranges of the impact velocity and remaining fuel percentage are 50 to 200m/s, and 30 to 90%, respectively. Four parameters, i.e., kinetic energy, total impulse, maximum impulse, and maximum force are proposed for candidates of the reference parameter. The wellness of the correlation between the reference parameter and structural responses was formulated using the coefficient of determination ($R^2$). From the results, we found that the maximum force showed the highest $R^2$ value in most responses in the materials. The simplicity and intuitiveness of the maximum force parameter are also remarkable compared to the other candidate parameters. Therefore, it can be concluded that the maximum force is the most proper candidate for the reference parameter to assess the aircraft impact induced risk of NPPs.

• Journal of the Korean earth science society
• /
• v.35 no.6
• /
• pp.484-497
• /
• 2014

This study aimed to investigate high school students' conceptions of plate tectonics. Seventy students (N=70) in their 2 year of high schools in the province of Chungcheong-do participated in this study, and they took a conception test of visual representation. We conducted a semi-structured interview with 10 volunteering participants out of seventy. After learning about the concept of plate tectonics, this study found that participants ended up having alternative conceptions relating to terminology, meaning of colors, plates' movement, plates' boundaries, position and cause of melting, mantle's physical conditions, and driving forces of plate motion. The conceptions that the participants held after class were organically related, which included the meaning of colors, mantle's physical characteristic, and driving forces of plate movement. In addition, the visual representation used for teaching plate tectonics influenced the students' understanding about terminologies, plates' boundaries, position of melting, and the physical characteristic of mantle. The study found that there were the factors of visual representation that caused the learners to create alternative conceptions in learning about plate tectonics.