• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.976-983
• /
• 2023

Purpose: The dynamic behavior of a bridge structure under seismic loading depends on many uncertainties, such as the nature of the seismic waves and the material and geometric properties. However, not all uncertainties have a significant impact on the dynamic behavior of a bridge structure. Since probabilistic seismic performance evaluation considering even low-impact uncertainties is computationally expensive, the uncertainties should be identified by considering their impact on the dynamic behavior of the bridge. Therefore, in this study, a global sensitivity analysis was performed to identify the main parameters affecting the dynamic behavior of bridges with I-curved girders. Method: Considering the uncertainty of the earthquake and the material and geometric uncertainty of the curved bridge, a finite element analysis was performed, and a surrogate model was developed based on the analysis results. The surrogate model was evaluated using performance metrics such as coefficient of determination, and finally, a global sensitivity analysis based on the surrogate model was performed. Result: The uncertainty factors that have the greatest influence on the stress response of the I-curved girder under seismic loading are the peak ground acceleration (PGA), the height of the bridge (h), and the yield stress of the steel (fy). The main effect sensitivity indices of PGA, h, and fy were found to be 0.7096, 0.0839, and 0.0352, respectively, and the total sensitivity indices were found to be 0.9459, 0.1297, and 0.0678, respectively. Conclusion: The stress response of the I-shaped curved girder is dominated by the uncertainty of the input motions and is strongly influenced by the interaction effect between each uncertainty factor. Therefore, additional sensitivity analysis of the uncertainty of the input motions, such as the number of input motions and the intensity measure(IM), and a global sensitivity analysis considering the structural uncertainty, such as the number and curvature of the curved girders, are required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.19-24
• /
• 2020

The interest in renewable energy is increasing due to the depletion of fossil fuels. In particular, active research on wave power, which is highly predictable and abundant, is being conducted. The coaxial accelerator-type wave power generator used in this study was designed to improve the power generation efficiency by converting bidirectional linear motion into a rotational force. In an offshore engineering basin, waves were generated, and case tests were performed according to the wave period and wave height. The experimental results were verified by the theoretical method related to the frequency response, and the overall trend was confirmed to be consistent. These results are expected to be useful in estimating the power of wave generators and designing parameters to improve the efficiency of wave energy in the design stage before manufacturing. In addition, the manufacturer can predict the wave energy efficiency of wave generators, which can reduce the development time and cost by preventing trial and error processes.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.263-268
• /
• 2010

Purpose: Eye movements and fixation ability are an important procedure to obtain external information and essential means of clear vision. The purpose of this study was to determine the reading performance such as reading time and number of fixations when random text was viewed at varying distances. Methods: Twenty two presbyopes were participated. All subjects were screened for their suitability to participate in the study by clinical examination, and none of the participants had previously worn contact lenses and no previous experience of wearing any types of presbyopic vision correction except single vision. The reading time and number of fixations were recorded using eye tracker while each subjects was waring four vision corrections which included single vision for distance (SV), bifocal spectacle lenses (BIF), progressive addition lenses (PAL), and monovision (MV). The reading material was presented at distance and near distance. Results: Reading time and number of fixations for near stimulus were significantly different among vision correction used in this study (p<0.001). In particular, wearing SV required longer reading time and produced longer fixation duration for near text. However, reading distance text was similarity performed across vision corrections tested and there was no statistical difference found for either reading time and number of fixations. Conclusions: Wearing presbyopic vision correction is advantageous for reading task of near stimuli, but not having near correction such as wearing SV could result in longer reading time and higher number of fixation due to lacks of accommodative ability for near task. For the future studies, it would be interesting to examine the performance of reading both at adapted and unadapted stages as examining only unadapted wearers was limitation of this study.

• Nuclear Engineering and Technology
• /
• v.28 no.1
• /
• pp.1-16
• /
• 1996

In an effort to determine the combined effects of major parameters of heat exchanger tubes on the nucleate pool boiling heat transfer in the scaled in-containment refueling water storage tank (IRWST), a total of 1,966 data for q'quot; versus ${\Delta}T$ has been obtained using various combinations of tube diameters, surface roughness, and tube orientations. The experimental results show that (1) increased surface roughness enhances heat transfer for both horizontal and vertical tubes, (2) the two heat transfer mechanisms, i.e.,enhanced heat transfer for both horizontal and vertical tubes, (2) the two heat transfer mechanisms, i.e., enhanced heat transfer due to liquid agitation by bubbles generated and reduced heat transfer by the formation of large vapor slugs and bubble coalescence are different in two regions of low heat fluxes (q'quot; $\leq$50kW/$m^2)$ and high heat fluxes (q'quot; $\geq$50kW/$m^2)$ depending on the orientation of tubes and the degree of surface roughness, and (3) the heat transfer rate decreases as the tube diameter is increased for both horizontal and vertical tubes, but the effect of tube diameter on the nucleate pool boiling heat transfer for vertical tubes is greater than that for horizontal tubes. Two empirical heat transfer correlations for q'quot;, one for horizontal tubes and the other for vertical tubes, are obtained in terms of surface roughness $({\varepsilon})$ and tube diameter (D). In addition, a simple empirical correlation for nucleate pool boiling heat transfer coefficient $(h_b)$ is obtained as a function of heat flux (q'quot;) only.ucleate pool boiling heat transfer coefficient $(h_b)$ is obtained as a function of heat flux (q'quot;) only.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.545-554
• /
• 2011

In order to get dynamic serviceability of a train travelling on a railway bridge, comfort limits with the deflection of bridge and vertical acceleration on car body are proposed in Eurocode, Shinkansen design criteria, The design guideline of the Honam High-speed railway. The design guideline of the Honam High-speed railway has quoted Eurocode. Therefore it is expected that supplementation of comfort limit of railway bridge according to expansion of span length and the improvement traveling speed of trains in the future would relatively fall behind developed countries in railway. Therefore, in order to secure technological competitiveness in world market, the study was conducted to propose the deflection limit based on vibration serviceability of railway bridges that can consider bridge-train interaction and travelling speed increase. The parameter study and bridge-train dynamic interaction analysis was conducted to figure out the correlation of vertical acceleration on car body and bridge displacement according to the increase in travelling speed. Also, the trend of increasing vertical acceleration on car body according to the increase in travelling speed was confirmed, and the amplification coefficient of vertical acceleration on car body was suggested. And the deflection form and vibration of the bridge were assumed to be in harmonic motion, and transfer function and the amplification coefficient were used to develop the dynamic serviceability deflection limit of the high-speed railway bridge as a formula.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.2
• /
• pp.23-33
• /
• 2011

In this study, a CFPBS (Cone-type Friction Pendulum Bearing System) was developed which controls the acceleration delivered to the structure to prevent damage and degradation of the critical communication equipment in case of an earthquake. The isolation performance of the CFPBS was evaluated by numerical analysis. The CFPBS was manufactured in the shape of a cone differenced from the existing FPS (Friction Pendulum System), and a pattern was engraved on the friction surface. The natural frequencies of the CFPBS were evaluated from a free-vibration test with the seismic isolator system consisting of four CFPBSs. In order to verify its earthquake-resistant performance, a numerical analysis program was created from the equation of the CFPBS induced from the equations of motion. A simplified theoretical equation of the CFPBS was proposed to manufacture the equipment which could demonstrate the necessary performance. Artificial seismic waves satisfying the maximum earthquake scale of the Korean Building Code-Structural (KBC-2005) were created and verified to review the earthquake-resistant performance of the CFPBS by numerical analysis. The superstructural mass of the CFPBS and skew angle of the friction surface were considered for numerical analysis with El Centro NS (1940), Kobe NS (1995) and artificial seismic waves. The CFPBS isolation performance evaluation was based on the results of numerical analysis and the executed comparative analysis between the results from numerical analysis and the simplified theoretical equation under the same conditions.

• Journal of Korea Water Resources Association
• /
• v.39 no.3 s.164
• /
• pp.261-274
• /
• 2006

This study performs a daily long-term runoff analysis for 30 years to forecast medium- and long-term probabilistic reservoir inflows on the Soyang River basin. Snowmelt is computed by Anderson's temperature index snowmelt model and potenetial evaporation is estimated by Penman-combination method to produce input data for a rainfall-runoff model. A semi-distributed TOPMODEL which is composed of hydrologic rainfall-runoff process on the headwater-catchment scale based on the original TOPMODEL and a hydraulic flow routing model to route the catchment outflows using by kinematic wave scheme is used in this study It can be observed that the time variations of the computed snowmelt and potential evaporation are well agreed with indirect observed data such as maximum snow depth and small pan evaporation. Model parameters are calibrated with low-flow(1979), medium-flow(1999), and high-flow(1990) rainfall-runoff events. In the model evaluation, relative volumetric error and correlation coefficient between observed and computed flows are computed to 5.64% and 0.91, respectively. Also, the relative volumetric errors decrease to 17% and 4% during March and April with or without the snowmelt model. It is concluded that the semi-distributed TOPMODEL has well performance and the snowmelt effects for the long-term runoff computation are important on the study area.

• Asia Marketing Journal
• /
• v.14 no.1
• /
• pp.99-130
• /
• 2012

Service failure and a poor service recovery may lead loyal customers to try to aggressively punish the service firm. We use perceived betrayal and desire for vengeance as the key constructs to understand customer retaliation. Perceived betrayal is defined as a customer's belief that a firm has intentionally violated what is normative in the context of their relationship. And the desire for vengeance is defined as the retaliatory feelings that consumers feel toward a firm, such as the desire to exert harm on the firm. The perceived betrayal and the desire for vengeance are key antecedents of retaliatory behaviors such as vindictive complaining, negative WOM and third-party complaining for publicity. The empirical results suggest that betrayal is a key motivational factor that lead customers to restore fairness by making use of all means, including retaliation. We also find that relationship quality has effect on a customer's response to a failure in service recovery. As the levels of relationship increases, a violation of the proper fairness has a stronger effect on the sense of betrayal experienced by customers. Considerable research has investigated consumer responses to dissatisfaction. But our study examine the response of outraged and highly frustrated consumers. We focus on emotional and behavioral processes that have not been covered by previous dissatisfaction researches and which are unique to outraged consumers caused by extremely dissatisfied purchase experience. It has recently been pointed out by various mass media that the customers not only have positive effects on the company performance but also put the company in crisis. It has often been reported that one customer's dissatisfaction, for example, never ends as it is, and it tends to grow for retaliating upon the company, depending on the level of seriousness of the dissatisfaction. This sometimes leads to a lawsuit against the company. Our study focuses on the customers' emotional and behavioral responses induced by their extreme dissatisfactions. We divided the customer groups into the customers with high relationship quality and the customers with low relationship quality, and the difference between two groups is examined. The objective of this study is to comprehend the causal relationship between the feeling of betrayal caused by the service failure and the retaliatory behavior triggered by the desire of revenge. Our study is divided into three parts. First, a causal relationship between perceived unfairness and the perceived betrayal and desire for revenge. Second, the effect of the perceived betrayal and desire for revenge on the retaliatory behavior is investigated. Finally, the moderating role of relationship quality in the causal relationship between the unfairness in service recovery and the perceived betrayal is analyzed. This study finds the following empirical results. The distributive unfairness, procedural unfairness and interactional unfairness had significant effects on the perceived betrayal. Especially, the perceived distributive unfairness results in the highest perceived betrayal. When the service company does not provide customers proper and sufficient compensation for the failure, they feel the strong sense of betrayal. And in the causal relationship between the perceived betrayal, desire for revenge and retaliatory behavior, the perceived betrayal has significant effects on e desire for revenge. In addition desire for revenge has significant effects on negative word of mouth, retaliatory complaining behavior and publicity of complaints through third group. Therefore the perceived unfairness has effects on retaliatory behavior through the mediation of the perceived betrayal and desire for revenge. Finally the moderating role of relationship quality was examined in the relationship between the unfairness and perceived betrayal. If the customers experienced the perceived unfairness in the process of service recovery, the customers with high relationship quality feel the stronger perceived betrayal than the customers with low relationship quality do. When they experience the double service failure, the customer group with high relationship quality accumulating the sense of trust feel the more perceived betrayal than the customer with low relationship quality who do not have strong trust. The contribution of this study is to find the effect of the service failure on the retaliatory behavior with the moderating roles of relationship quality. The dimensions of unfairness in service recovery is found to have differential effects on the perceived betrayal, desire for revenge. And these differential effect is moderated by the level of relationship quality.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.249-258
• /
• 1993

Between March 1983 and December 1989, ninety-six patients with intracranial glioma were treated in the Department of Therapeutic Radiology, Kangnam St. Mary's Hospital, Catholic University Medical College. We retrospectively reviewed each case to evaluate variable factors influencing the treatment results and to develop an optimal therapy Policy. Median follow-up is 57 months (range: 31~133 months). Of the 96 patients, 60 $(63\%)$ were males and 36 $(37\%)$ were females. Ages ranged from 3 to 69 years (median 42 years). The most common presenting symtoms were headeche $(67\%)$ followed by cerebral motor and sensory discrepancy $(54\%),$ nausea and vomiting $(34\%),$ seizure $(19\%),$ mental change $(10\%)$ and memory and calculation impairment $(8\%).$ Eighty five $(88.5\%)$ patients all, except 11 $(11.5\%)$ brain stem lesions, were biopsy proven intracranial glioma. The distribution by histologic type was 64 astrocytomas $(75\%),$ 4 mixed oligoastrocytomas $(5\%),$ and 17 oligodendrogliomas $(20\%).$ Fourty nine patients $(58\%$ were grade I, II histology and 36 $(42\%)$ patients were grade III, IV histology. Of the 96 patients, 64 $(67\%)$ recieved postoperative RT and 32 $(33\%)$ were treated with primary radiotherapy. Gross total resection was peformed in 14 $(16\%)$ patients, subtotal resection En 29 $(34\%),$ partial resection in 21 $(25\%),$ and biopsy only in 21 $(25\%).$ Median survival time was 53 months (range 2~ 133 months), and 2- and, 5-year survival rate were $69\%,49\%$ respectively. 5-year survival rate by histologic grade was grade I, $70\%,$ grade II, $58\%,$ grade III, $28\%,$ and grade IV, $15\%.$ Multivariated analysis demonstrate that age at diagnosis (p=0.0121), Karnofsky performance Status (KPS) (p=0.0002), histologic grade (p=0.0001), postoperative radiation therapy (p=0.0278), surgical extent (p =0.024), cerebellar location of tumor (p=0.0095) were significant prognostic factors influencing on survival.