• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.12
• /
• pp.1048-1053
• /
• 2015

Ablative materials in a thermal protection system for atmospheric re-entry suffers from the most severe heat fluxes and temperatures, which induces surface recession in the thickness direction. In this paper, a 0.4MW arc-heated wind tunnel is operated to test for ablative materials, and a non-contact three-dimensional surface measuring system is used to evaluate the different surface characteristics of them. In particular, by postprocessing the three-dimensional image data, the surface roughness and recession of ablative materials can be calculated before and after the wind tunnel test. Moreover, the surface properties are analyzed quantitatively by comparing volume and mass losses of the test specimens.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.342-348
• /
• 2017

In this paper, film cooling characteristics at supersonic free stream conditions were examined experimentally by applying an IR-thermography. Film cooling experiments were carried out in a free-jet facility at Mach number of 3.0 and with unit Reynolds number of $42.53{\times}10^6$ and $69.35{\times}10^6$ using wedge shaped film cooling model which has a converging film cooling nozzle. Film cooling efficiency was calculated by measuring the surface temperature of PEEK(Polyether Ether Ketone) and the effects of angle of attack and blowing ratios on the film cooling efficiency were examined. The measured wall temperature was significantly reduced by the film cooling flow compared with the results without the film cooling flow. The usefulness of film cooling was also confirmed by the surface heat flux calculated using the surface temperature history of PEEK. As the blowing ratio increases the protected area of PEEK was also expanded along the direction of free stream and film cooling flow.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.3
• /
• pp.257-264
• /
• 2015

The structure of SpaceEye-1 developed by Satrec Initiative is designed to carry out various earth observation missions in harsh launch and orbit environments. This paper describes methodology of the structure design and analysis performed during the SpaceEye-1 development. The SpaceEye-1 structure is designed not only to endure the static/dynamic loads but also to protect a main payload and all other components under the launch environments. The structural design requirements were derived from the requirements of the launch vehicle, payload, and other subsystems from the initial development phase. Three-dimensional modeling process was used to verify geometric compatibility of the structure with the other subsystems, and finite element analysis was used to confirm whether the designed structure satisfied all the mechanical requirements derived from the launch vehicle and payload.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.155-169
• /
• 2004

Space launch vehicles and reentry vehicles are exposed to extreme heating conditions due to high aerodynamic heating while flying at high Mach numbers in the atmosphere. To protect the vehicle itself or the payload from the aerodynamic heating, the thermal load imposed on the surface should be exactly predicted and proper thermal protection should be applied based on the prediction results. But this requires rigorous thermal analysis and testing to prevent loss of payload capacity caused by excessive heat shielding, and the amount of thermal protection material to be applied is determined through aerodynamic heating tests. Various design points to be considered to upgrade the prototype aerodynamic thermal simulation facility(ATSF) used for the KSR-series sounding rocket development to the one suitable for the KSLV(Korean Space Launch Vehicle)-series launch vehicle are considered in this research. The need and limitation for the facility are first considered, and the functions required for KSLV testing are determined. The specifications of the upgraded facility are briefly suggested and these results will be used for the future fabrication and installation of the facility.

• Composites Research
• /
• v.30 no.6
• /
• pp.379-383
• /
• 2017

A study on the low Earth orbit (LEO) space environment have been conducted as a use of composites have increased. Among the LEO environmental factors, atomic oxygen is one of the most critical factors because atomic oxygen can react and erode a surface of polymer-based composite materials. POSS (Polyhedral Oligomeric Silsesquioxane) materials have been widely studied as an atomic oxygen-resistant nanomaterial. In this study, nanocomposites, which are composed of OG (Octaglycidyldimethylsilyl) POSS nanomaterials and DGEBA/DDM epoxy, were fabricated to find out its thermal and mechanical properties. FT-IR results showed that the nanocomposites were fully cured and contained OG POSS enough. Thermogravimetric analysis and differential scanning calorimetry were performed to measure the thermal properties of the nanocomposites. The initial mass loss temperature and char yield were increased through the filling of OG POSS. As the content of OG POSS increased, glass transition temperature tended to increase to 5 wt.% of OG POSS, but the temperature decreased significantly at 10 wt.% of OG POSS. The tensile test results showed that the content of OG POSS did not affect tensile strength and tensile stiffness.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.223-258
• /
• 2013

1967 Outer Space Treaty(Treaty on Principles Governing the Activities of States in the Exploration and Use of Outer Space, including the Moon and Other Celestial Bodies; OST) is a treaty that forms the basis of international space law. OST is based on the 1963 Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space announced by UNGA resolution. As of May 2013, 102 countries are states parties to OST, while another 27 have signed the treaty but have not completed ratification. OST explicitly claimed that the Moon and Other Celestial Bodies are the province of all mankind. Art. II of OST states that "outer space, including the Moon and other celestial bodies, is not subject to national appropriation by claim of sovereignty, by means of use or occupation, or by any other means", thereby establishing res extra commercium in outer space like high seas. However 1979 Moon Agreement stipulates that "the moon and its natural resources are the Common Heritage of Mankind(CHM)." Because of the number of the parties to the Moon Agreement(13 parties) it does not affect OST. OST also established its specific treaties as a complementary means such as 1968 Rescue Agreement, 1972 Liability Convention, 1975 Registration Convention. OST bars states party to the treaty from placing nuclear weapons or any other weapons of mass destruction in orbit of Earth, installing them on the Moon or any other celestial body, or to otherwise station them in outer space. It exclusively limits the use of the Moon and other celestial bodies to peaceful purposes and expressly prohibits their use for testing weapons of any kind, conducting military maneuvers, or establishing military bases, installations, and fortifications. However OST does not prohibit the placement of conventional weapons in orbit. China and Russia submitted Draft Treaty on the Prevention of the Placement of Weapon in Outer Space and of the Threat or Use of Force against Outer Space Objects(PPWT) on the Conference on Disarmament in 2008. USA disregarded PPWT on the ground that there are no arms race in outer space. OST does not have some articles in relation to current problems such as space debris, mechanisms of the settlement of dispute arising from state activities in outer space in specific way. COPUOS established "UN Space Debris Mitigation Guidelines" based on "IADC Space Debris Mitigation Guidelines" and ILA proposed "International Instrument on the Protection of the Environment from Damage Caused by Space Debris" for space debris problems and Permanent Court of Arbitration(PCA) established "Optional Rules for Arbitration of Disputes Relating to Outer Space Activities" and ILA proposed "1998 Taipei Draft Convention on the Settlement of Space Law Dispute" for the settlement of dispute problems. Although OST has shortcomings in some articles, it is very meaningful in international law in considering the establishment of basic principles governing the activities of States in the exploration and use of outer space, including the Moon and Other Celestial Bodies. OST established the principles governing the activities of states in the exploration and use of outer space as customary law and jus cogens in international law as follows; the exploration and use of outer space shall be carried out for the benefit and in the interests of all countries and shall be the province of all mankind; outer space shall be free for exploration and use by all States; outer space is not subject to national appropriation by claim of sovereignty, by means of use or occupation, or by any other means. The principles of global public interest in outer space imposes international obligations erga omnes applicable to all States. This principles find significant support in legal norms dealing with following points: space activities as the "province of all mankind"; obligation to cooperate; astronauts as envoys of mankind; avoidance of harmful contamination; space activities by States, private entities and intergovernmental organisations; absolute liability for damage cauesd by certain space objects; prohibition of weapons in space and militarization of the celestial bodies; duty of openness and transparency; universal application of the international space regime.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.196.2-196.2
• /
• 2012

본 논문은 달착륙선의 개념설계를 위하여 고려한 전력시스템의 설계와 달착륙선의 지상시험모델용 추력기 밸브구동 전원장치 개발에 대해 기술하였다. 달착륙선의 임무특성을 고려하여 전력시스템의 구조를 검토하고, 극한의 온도환경에서 달착륙선의 임무수행을 위하여 필요한 전력에너지를 충분히 공급할 수 있도록 태양전지 배열기와 배터리의 용량, 그리고 전장품의 용량을 설계하였다. 특히 경량의 달착륙선 개발을 위하여 고효율의 태양전지를 이용한 태양전지 배열기와 리튬-이온 배터리를 검토하였다. 극한의 우주환경에서 태양전지배열기의 동작특성을 검토하고 생성될 수 있는 최대 전력을 분석하여 최적의 태양전지 배열기의 면적을 분석하고, 장시간의 월식을 고려하여 배터리의 방전특성에 따른 배터리의 전압특성을 검토하였다. 그리고 달착륙선의 전력시스템 개념설계의 타당성 검토를 위하여 유럽에서 개념설계 중인 달착륙선의 전력시스템 사양과 용량에 대해 비교검토를 수행하였다. 현재 개발중인 지상검증모델용 달착륙선의 전력시스템 설계와 추력기 밸브구동 전원장치의 개발에 관해 기술하였다. 지상검증용 전력시스템은 태양전지배열기의 장착 없이 배터리의 전력만을 사용하여 지상검증모델용 달착륙선의 부하에 전력을 공급할 수 있도록 설계되었다. 달착륙선 지상시험모델의 비행시간과 임무에 따른 부하특성을 고려하여 상용 리튬-이온 배터리의 용량을 선정하였으며, 부하의 전력을 고려하여 간단한 보호회로를 설계하였다. 그리고 지상검증용 전원시스템은 추력기의 밸브구동을 위한 추력기 밸브구동 전원장치, DC/DC 컨버터 전원 모듈, 모니터링 모듈, 그리고 위급상황에서 전원을 차단하기 위한 "Emergency STOP" 모듈로 구성되어 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1071-1086
• /
• 2016

The safety of aircraft can be threatened by environmental factors, such as icing, turbulence, and lightning strike. Due to its adverse effects on aircraft structure and electronic components of aircraft, lightning strike is one of the biggest hazards on aircraft safety. Lightning strike can inject high voltage electric current to the aircraft, which may generate strong magnetic field and extreme hot spots, leading to severe damage of structure or other equipment in aircraft. In this work, mechanism of lightning strike and associated direct and indirect effects of lightning on aircraft were studied. First, on the basis of aircraft lightning regulations provided by Aerospace Recommended Practice (ARP), we considered different lightning waveform and zones of an aircraft. A coupled thermal-electrical computational model of ABAQUS was then used for simulating flow of heat and electric current caused by a lightning strike. A study on fuel tank, with and without lightning protection system, was also conducted using the computational model. Finally, electric current flow on two full scale airframes was analyzed using the EMA3D code.

• Journal of Aerospace System Engineering
• /
• v.12 no.3
• /
• pp.38-44
• /
• 2018

Military aircraft may have fatigue cracks in structurally weak areas due to multiple factors such as the accumulation of flight time while perform various missions and unpredictable air conditions. As a fatigue crack progresses, there is a risk that the structure will be destroyed in extreme cases, which can have a significant impact on flight safety. In this study, a cracking phenomenon was observed during the periodic inspection the inner support of the fairing, which is installed to protect the connection between the wing and the body of the aircraft. Therefore, a study on a series of quality improvement processes for reformation was described. In order to identify the causes of cracks, pre-load generation occurrence during the wing assembly process was investigated and a fracture analysis was performed. Also, the design of the support structure was suggested in terms of preventing recurrence of cracks. The structural integrity was verified using a stress and fatigue life analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.900-907
• /
• 2013

Payload fairing(PLF) protects satellites and related equipment from the external environment. They are separated before the satellite separation. Payload fairing made of composite sandwich materials due to their considerable bending stiffness and strength-to-weight ratio. Payload fairing have compression, shear and bending load during the flight. In this study, To check the strength of PLF and connected part, structural test of PLF accomplished using an actuator and a fixture. Purpose of structural test is to verify the strength of PLF in force of separation spring and combination structural load applied. Test result shows that the PLF have an acceptable margin of safety for the combination structural load and force of separation spring.