• Title/Summary/Keyword: 우수이용

Search Result 16,365, Processing Time 0.053 seconds

Nano-mechanical Properties of Nanocrystal of HfO2 Thin Films for Various Oxygen Gas Flows and Annealing Temperatures (RF Sputtering의 증착 조건에 따른 HfO2 박막의 Nanocrystal에 의한 Nano-Mechanics 특성 연구)

  • Kim, Joo-Young;Kim, Soo-In;Lee, Kyu-Young;Kwon, Ku-Eun;Kim, Min-Suk;Eum, Seoung-Hyun;Jung, Hyun-Jean;Jo, Yong-Seok;Park, Seung-Ho;Lee, Chang-Woo
    • Journal of the Korean Vacuum Society
    • /
    • v.21 no.5
    • /
    • pp.273-278
    • /
    • 2012
  • Over the last decade, the hafnium-based gate dielectric materials have been studied for many application fields. Because these materials had excellent behaviors for suppressing the quantum-mechanical tunneling through the thinner dielectric layer with higher dielectric constant (high-K) than $SiO_2$ gate oxides. Although high-K materials compensated the deterioration of electrical properties for decreasing the thickness of dielectric layer in MOSFET structure, their nano-mechanical properties of $HfO_2$ thin film features were hardly known. Thus, we examined nano-mechanical properties of the Hafnium oxide ($HfO_2$) thin film in order to optimize the gate dielectric layer. The $HfO_2$ thin films were deposited by rf magnetron sputter using hafnium (99.99%) target according to various oxygen gas flows. After deposition, the $HfO_2$ thin films were annealed after annealing at $400^{\circ}C$, $600^{\circ}C$ and $800^{\circ}C$ for 20 min in nitrogen ambient. From the results, the current density of $HfO_2$ thin film for 8 sccm oxygen gas flow became better performance with increasing annealing temperature. The nano-indenter and Weibull distribution were measured by a quantitative calculation of the thin film stress. The $HfO_2$ thin film after annealing at $400^{\circ}C$ had tensile stress. However, the $HfO_2$ thin film with increasing the annealing temperature up to $800^{\circ}C$ had changed compressive stress. This could be due to the nanocrystal of the $HfO_2$ thin film. In particular, the $HfO_2$ thin film after annealing at $400^{\circ}C$ had lower tensile stress, such as 5.35 GPa for the oxygen gas flow of 4 sccm and 5.54 GPa for the oxygen gas flow of 8 sccm. While the $HfO_2$ thin film after annealing at $800^{\circ}C$ had increased the stress value, such as 9.09 GPa for the oxygen gas flow of 4 sccm and 8.17 GPa for the oxygen gas flow of 8 sccm. From these results, the temperature dependence of stress state of $HfO_2$ thin films were understood.

High Dose Rate Interstitial Brachytherapy in Soft Tissue Sarcomas : Technical Aspect (연부조직종양에서 고선량율 조직내 방사선치료: 기술적 측면에서의 고찰)

  • Chun Mison;Kang Seunghee;Kim Byoung-Suck;Oh Young-Taek
    • Radiation Oncology Journal
    • /
    • v.17 no.1
    • /
    • pp.43-51
    • /
    • 1999
  • Purpose : To discuss the technical aspect of interstitial brachytherapy including method of implant, insertion time of radioactive source, total radiation dose, and complication, we reviewed patients who had diagnoses of soft tissue sarcoma and were treated by conservative surgery, interstitial implant and external beam radiation therapy Materials and Methods : Between May 1995 and Dec. 1997, ten patients with primary or recurrent soft tissue sarcoma underwent surgical resection (wide margin excision) and received radiotherapy including interstitial brachytherapy. Catheters were placed with regular intervals of 1 ~l.5 cm immediately after tumor removal and covering the critical structures, such as neurovascular bundle or bone, with gelform, muscle, or tissue expander in the cases where the tumors were close to those structures. Brachytherapy consisted of high dose rate, iridium-192 implant which delivered 12~15 Gy to 1 cm distance from the center of source axis with 2~2.5 Gy/fraction, twice a day, starting on 6th day after the surgery, Within one month after the surgery, total dose of 50~55 Gy was delivered to the tumor bed with wide margin by the external beam radiotherapy. Results : All patients completed planned interstitial brachytherapy without acute side effects directly related with catheter implantation such as infection or bleeding. With median follow up duration of 25 months (range 12~41 months), no local recurrences were observed. And there was no severe form of chronic complication (RTOGIEORTC grade 3 or 4). Conclusion : The high dose rate interstitial brachytherapy is easy and safe way to minimize the radiation dose delivered to the adjacent normal tissue and to decrease radiation induced chronic morbidity such as fibrosis by reducing the total dose of external radiotherapy in the management of soft tissue sarcoma with conservative surgery.

  • PDF

Structural and optical properties of TiO2 thin films prepared by Sol-Gel dip coating method (졸-겔 침지코팅법으로 제조된 TiO2 박막의 구조적.광학적 특설)

  • 김동진;이학준;한성홍;김의정
    • Korean Journal of Optics and Photonics
    • /
    • v.13 no.3
    • /
    • pp.197-203
    • /
    • 2002
  • The TiO$_2$ coating solutions were synthesized with different concentrations (T1-0.7N, T2-2.0N) of hydrochloric acid used as catalyst. and TiO$_2$ thin films were prepared by sol-gel dip coating. Their structural and optical properties were examined as a function of calcination temperature. XRD results showed that T1 thin films calcined at 400~80$0^{\circ}C$ had the anatase phase, while those calcined at 100$0^{\circ}C$ had the rutile phase. T2 thin films calcined at 40$0^{\circ}C$ and $600^{\circ}C$ had the anatase phase, with the rutile phase for calcination at 80$0^{\circ}C$. Crystallinity of T2 thin films was superior to that of T1 thin films. The crystallite size of TiO$_2$ thin films increased with increasing calcination temperature, and the crystallite size of anatase phase in T2 thin films was larger than that in T1 thin films, but the crystallite size of rutile phase in T2 thin films was smaller. The surface morphology of the films showed that the films were formed more densely in the rutile phase than in the anatase phase, this phenomenon appeared conspicuously in T2 thin films. The transmittance of the samples with thin films on quartz glass calcined at 100$0^{\circ}C$ was significantly reduced at wavelength range about 300-700 nm due to the increased absorption originating from the change of crystallite phase and composition of the films and the scattering effect originating from increasing crystallite size. The refractive index of TiO$_2$ thin films increased, and hence the film thickness as well as the porosity of TiO$_2$ thin films decreased with increasing calcination temperature. Furthermore, the refractive index of T2 thin films was higher than T1 thin films, and porosity of T2 films was lower.

Estimated Gas Concentrations of MA(Modified Atmosphere) and Changes of Quality Characteristics during the MA Storage on the Oyster Mushrooms (느타리버섯의 환경기체조성 농도 예측 및 MA 저장 중 품질특성 변화)

  • Lee, Hyun-Dong;Yoon, Hong-Sun;Lee, Won-Og;Jung, Hoon;Cho, Kwang-Hwan;Park, Won-Kyu
    • Food Science and Preservation
    • /
    • v.10 no.1
    • /
    • pp.16-22
    • /
    • 2003
  • This study was conducted to find out effective MA (Modified Atmosphere) gas compositions on the oyster mushroom through statistical analysis of the respiration rate and MA storage for the various packaging materials. Under the various gas compositions, the oxygen consumption rate of oyster mushroom was from 28.9 to 161.4mgO$_2$/kg$.$hr and the carbon dioxide evolution rate was from 53.4 to 166.9 mgCO$_2$/kg$.$hr at 20$^{\circ}C$. The estimated MA condition of oyster mushroom were 2.5∼4.5%O$_2$and 11.5∼l3%CO$_2$by the RSREG(Response Surface Regression). The gas compositions of MA packaging are following that 0.03mm LDPE were 1.6∼3.0%O$_2$and 3.9∼5.3%CO$_2$,0.05mm LDPE were 1.2∼1.3%O$_2$and 9.0∼11.1%CO$_2$and Nylon+PE were 0.9∼1.2%O$_2$and 33.5∼39.6%CO$_2$. The weight loss increased at 0.03mm LDPE but has the lowest value at Nylon+PE. The hardness of pileus and stipe was decreased with storage periods. The $\Delta$E-value increased with storage period and seriously changed in early storage period at 12 and 20$^{\circ}C$. In the 0.05mm LDPE, the gas compositions of packaging were similar to estimated gas compositions from the RSREG and the storage quality was superior to the other packaging materials in weight loss, hardness, and color difference at 4, 12 and 20 $^{\circ}C$.

Biological Activity of Sorghum bicolor M. cv. Bulgeunjangmoksusu Extracts (붉은장목수수 추출물의 생리활성)

  • Kim, Joo-Seok;Lee, Yea-Ji;Yang, Jinfeng;Sa, Yeo-Jin;Kim, Myeong-Ok;Park, Jong-Hyuk;Park, Dong-Sik;Yu, Chang-Yeon;Kim, Myong-Jo
    • Korean Journal of Plant Resources
    • /
    • v.26 no.1
    • /
    • pp.111-118
    • /
    • 2013
  • The objective of this study was to determine the biological activities of Sorglum bicolor extracts. Organic fractions, including n-Hexane, EtOAc, and n-BuOH fractions were obtained from the methanol extract of Sorglum bicolor M.. In DPPH radical scavenging activity, $SC_{50}$ values of methanol extract and EtOAc fraction were exhibited $0.66{\pm}0.26{\mu}g/mL$ and $1.03{\pm}0.02{\mu}g/mL$, respectively. Contents of total polyphenol and flavonoids in EtOAc fraction, which were much higher than those of other fractions, were 58.12 mg/g and 4.79 mg/g respectively. Also, effects of reducing power was strongly showed in EtOAc fraction. ${\alpha}$-Glucosidase and ${\alpha}$-amlyase inhibition activities were showed the higher effect in D.W. fraction ($2.83{\mu}g/mL$, $36.64{\mu}g/mL$). In MTT assay in the AGS, HT29 and HCT116 cell lines were significantly higher in the n-BuOH fraction than in the other fractions at $50{\mu}g/mL$ concentration of extracts.

Hydrothermal Synthesis of Kaolinite (캐올리나이트의 수열합성)

  • Jang, Young-Nam;Ryu, Gyoung-Won;Chae, Soo-Chun;Lee, Sung-Ki;Suh, Yong-Jae;Bae, In-Kook
    • Journal of the Mineralogical Society of Korea
    • /
    • v.20 no.3
    • /
    • pp.147-153
    • /
    • 2007
  • Kaolinite [$Al_2Si_2O_5(OH)_4$] was successfully synthesized by a hydrothermal process from amorphous $Al(OH)_3$ and $SiO_2$ at $230^{\circ}C$ under the pressure of $30 kg/cm^2$. The experiments were performed varying temperatures ($180{\sim}280^{\circ}C$), pressure ($10{\sim}60kg/cm^2$), chemistry ($Al_2O_3/SiO_2 = 0.5{\sim}0.38$) and pH ($0.3{\sim}9.5$) of the solution. The autoclaving was carried out in a closed stainless steel vessel. Kaolinite appears from the starting composition of $Al_2O_3/SiO_2= 0.5$ with boehmite and was stable as a single phase with the composition of $Al_2O_3/SiO_2=0.45$. Boehmite was a stable phase below $200^{\circ}C$ for the 240 h period of autoclaving, but kaolinite appeared even in 20 h at $230^{\circ}C$. The single kaolinite phase of a good crystallinity was observed at pH ranging 2 to 6. That indicates that pH is one of the most critical parameters for the successful formation of kaolinite. The optimal molar ratio of $Al_2O_3$ to $SiO_2$ was determined to be 0.45. The XRD pattern of the synthesized kaolinite coincided with that of natural one and its morphology was the cluster type of the kaolinite crystals (diameter = ${\sim}3{\mu}m$), irrespective of starting material, composition and temperature.

The Medical Doctors' Opinion of Public Health Center on the Development and Supply of Medical Doctor for Public Health Sector (공공보건분야 의사 인력 양성과 개발에 대한 보건소 근무 의사들의 인식)

  • Lee, Kyeong-Soo;Lee, Jung-Jeung;Kim, Jin-Sam;Hwang, Tae-Yoon;Son, Hyo-Kyung;Kim, Chun-Bae
    • Journal of agricultural medicine and community health
    • /
    • v.34 no.3
    • /
    • pp.303-315
    • /
    • 2009
  • Objectives: This study, as for activating measures for capable medical physicians to penetrate into the public health sector, is to provide a basic informations which are used for the enlargement of human resources of physicians in the public health sector, by investigating the perception of physicians, who are now working in the public health center, on the training and development of physicians in the public health sector. Methods: The subjects of this study were 126 individuals. The data was analyzed by frequency analysis using SPSS ver. 17.0K. Results: According to the investigation of 'how to support physicians in public health sector', the necessity of almost questions is considered to be important. Especially, regarding to investigation on 'obstacles of physicians' entrance to public health sector', 'relatively low salary' and 'lack of promotion chances' were thought to be considerable. The most significant education programs to work for public health sector is to improve the ability of health administration planning and service performance. Conclusions: The important methods to reinforce and easily obtain the human resources of physicians in public health sector are not only to improve the penetration of physicians to public health sector, but also to enhance the ability of present physicians, even though sufficient recruitment of physicians is essential.

Environment-Friendly Control of Beet Armyworm, Spodoptera exigua (Noctuidae: Lepidoptera) to Reduce Insecticide Use (농약 사용 저감화를 위한 환경 친화적인 파밤나방(Spodoptera exigua)의 방제)

  • Jin, Da-Yong;Paek, Seung-Kyung;Kim, Jin-Su;Choi, Su-Yeon;Park, Chan;Kim, Tae-Hwan;Jin, Na-Young;Jung, Sun-Young;Youn, Young-Nam;Yu, Yong-Man
    • Korean journal of applied entomology
    • /
    • v.48 no.2
    • /
    • pp.253-261
    • /
    • 2009
  • For the environment-friendly control of beet armyworm, Spodoptera exigua, in spring onion fields, we have examined an alternative application method. Twenty-five insecticides registered for spring onion were tested for control effect against the beet armyworm in the laboratory, then the best 9 chemical and a single biological insecticides were selected and compared with 2 new isolates of Bacillus thuringiensis in a polyvinyl house. After that, 4 chemical and 3 B. thuringiensis treatments were used in the field for the control of beet armyworm in the spring onion. Two application methods are used: one is triple treatments with the same chemical and the other is alternative application with different chemicals and B. thuringiensis for 7 days intervals. Indoxacarb WP - chlorfluazuron EC - B.t. var. kurstaki CAB141 and indoxacarb WP - methoxyfenozide + spinosad SC - Chlorfluazuron EC - B.t. var. aizawai CAB109, B.t. var. kurstaki CAB141 showed greater than 78% mortality of beet armyworm larvae and greater than 43% damage decrease in spring onions infested by beet armyworm. These results showed that alternative applications had higher control effect than any other applications. It was suggested that alternative applications with microbial biological agents such as B. thuringiensis might minimize the development of insecticide resistance and might be used as the environment-friendly control of the beet armyworm.

Studies on the Feeding Value of Some Leguminosae Tree Leaves (두과수엽(荳科樹葉)의 사료가치(飼料價値)에 관한 연구(硏究))

  • Kim, Jong Woo
    • Korean Journal of Agricultural Science
    • /
    • v.2 no.2
    • /
    • pp.399-404
    • /
    • 1975
  • In order to study on the utility for feed of several leguminosae tree leaves, the leaves of Lespedeza spp., Amorpha fruticosa and Robinia pseudo acacia were collected from several places of Daejon city and Daeduck-Kun at the different growing seasons. The leaf productivities, the change of the contents of chemical components on the different growing seasons. and the palatability trial were determined. The results were summarized as follows: 1. Leaf productivities of Amorpha fruticosa and Robinia pseudo acacia were higher than that of Lespedeza spp., and the highest production of Amorpha' fruticosa was showed in august and that of Robinia pseudo acacia was showed in september. 2. Crude protein contents of Lespedeza spp., Amorpha fruticosa and Robinia pseudo acacia were determined to 12.6, 18.63 and 15.87% respectively and the protein contents of them showed gradual decrease as growing. 3. Crude fat contents of Lespedeza spp., Amorpha fruticosa and Robinia pseudo acacia were determined to 9.00, 5.85 and 4.70% respectively, and they displayed gradual increase as growing, 4. Crude fiber contents of Lespedeza spp., Amorpha fruticosa and Robinia pseudo acacia were determined to 14.97, 12.61 and 9.80% respectively, and they showed gradual increase as growing. 5. The content of nitrogen free extract of Robinia pseudo acacia showed higher than those of Lespedeza spp. and Amorpha fruticosa, and all of them displayed gradual decrease as growing. 6. Crude ash contents of Lespedeza spp., Amorpha fruticosa and Robinia pseudo acacia determined to 4.40, 4.98 and 5.27% respectively, and variable changes were appeared as growing. 7. The results of palatability trial for three leaves showed superior to the order of Lespedeza spp., Robinia pseudo acacia and Amorpha fruticosa, and the dried leaves were more favorable than green leaves.

  • PDF

CASE REPORTS OF TREATMENT OF ERUPTION-DISTURBED MX. FIRST MOLAR BY SURGICAL EXPOSURE (맹출 장애를 가진 상악 제1대구치의 외과적 노출을 이용한 치험례)

  • Seok, Choong-Ki;Nam, Dong-Woo;Kim, Hyun-Jung;Kim, Young-Jin;Nam, Soon-Hyeun
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.31 no.1
    • /
    • pp.11-18
    • /
    • 2004
  • The eruption of permanent teeth represents the movement in the alveolar bone before appearance in oral cavity, to the occlusal plane after appearance in oral cavity, and additive movement after reaching th the occlusal plane. Tooth eruption is mostly controlled by genetic signals. The eruption stage is divided to preeruptive alveolar stage, alveolar bone stage, mucosal stage according to the process of growth and development. If the disturbance is occured in any stage of eruption, tooth does not erupt. The cause of eruption disturbance are ectopic position of the tooth germ, obstruction of the eruption path and defects in the follicle or PDL. In the treatment of eruption disturbance, surgical procedures are commonly used. There are three kind of surgical procedure ; surgical exposure, surgical repositioning, surgical exposure and traction Surgical exposure is basic procedure. This involves removal of mucosa, bone, lesion that are surrounding the teeth, dental sac when necessary to maintain a patent channel between the crown and the normal eruptive path into the oral cavity. To ensure this patency, many techniques including cementation of a celluloid crown, packing with gutta-percha or zinc oxide-eugenol, or a surgical pack, are used. When surgical exposure is conducted, operators should not expose any part of cervical root cement and not injure periodontium or root of adjunct tooth. After surgical exposure, tooth should be surrounded by keratinized gingiva. There is direct relationship between the extent of development of pathophysiologic aberrations and the intensity of the manipulative injury inflicted on the tooth by surgical treatment, so operator should consider this thing. In these cases, surgical exposure is conducted on Maxillary 1st milars that have a eruption disturbance and improve the eruption disturbance effectively.

  • PDF