• Title/Summary/Keyword: 우면산

Search Result 61, Processing Time 0.03 seconds

Noise Measurement and Analysis after Pavement by Pad Method in Umyeonsan Tunnel Seoul Art Center Passing Section (우면산 터널 예술의전당 통과구간 방진패드 공법의 도로포장 후 소음측정 및 분석)

  • 김병삼;이익주;서무전;조원창;석진길;유제남
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2004.05a
    • /
    • pp.687-687
    • /
    • 2004
  • 예술의 전당 하부를 통과하는 우면산터널은 예술의 전당 자료관, 오페라하우스, 음악당, 서예관, 미술관 등의 건물과 인접하여 설계되었다. 이들 건물은 진동의 전달경로에 따라 구조-구조의 전달경로인 자료관과 구조-지반-구조의 전달경로인 오페라하우스, 음악당, 서예관으로 분류할 수 있다. 자료관은 하부의 기조 중 일부가 우면산 터널의 통과를 위해 설치한 박스(box) 터널 상부와 구조계를 형성하고 있고, 오페라하우스와 음악당 및 서예관 주변으로는 우면산 터널의 상행선과 하행선이 각각 인접하여 통과하는 구조계를 형성하고 있다. 본 연구는 서울시 서초구 서초동~우면동에 이르는 우면산 터널에 실험 차량이 통과할 때 차량 통행으로 인해 발생하는 진동이 예술의전당 자료관, 오페라하우스, 음악당, 서예관 등의 건축구조물에 전달되는 고체전파음의 발생특성 파악하고, 예술의전당 통과구간에 방진패드에 의한 도로포장 공사 후 그에 대한 효과를 비교하였다. 또한, 우면산 터널 예술의 전당 통과구간에 대하여 다공성 아스팔트로 도로포장한 후 그에 대한 효과도 파악하였다.

  • PDF

Numerical modeling of debris flow in Mt. Umyeon using FLO-2D model (FLO-2D 모형을 이용한 우면산 토석류 수치모델링)

  • Kim, Seung-Eun;Paik, Joong-Cheol;Kim, Kyung-Suk
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.105-105
    • /
    • 2012
  • 최근 우리나라는 집중호우로 인한 토석류의 발생이 현저하게 증가하고 있으며, 2002년 태풍 루사와 2003년 매미 그리고 2006년 7월 집중호우 등으로 인한 피해의 규모는 여러 조사와 문헌에서도 확인할 수 있다. 2011년 7월, 서울 우면산 일대에서는 집중호우로 인한 토석류가 발생하였으며, 16명의 인명손실을 포함한 큰 피해가 있었다. 우면산 토석류는 십여 개 지역에서 동시다발적으로 발생하였으며, 토석류 발생 유역 특성과 토석류의 유동특성을 분석하기 위한 현장 조사가 진행되었다. 조사한 자료에 따르면 우면산 일대의 일일 강우량은 서초 기상측정소를 기준으로 최대 24시간 누적 324mm 그리고 시간당 최대 68.5mm/hr를 기록하였다. 상업용 소프트웨어인 FLO-2D는 유사농도의 함수로서 점성(viscous)응력, 항복(yield)응력, 난류 및 분산(dispersive) 응력항을 포함하는 2차 유변학(quadratic rheology) 모델을 기본으로 사용하여 이류(mudflow)와 토석류(debris flow)를 모의할 수 있다. FLO-2D는 흐름의 운동량 및 에너지 보존을 고려하여 격자와 시간에 관계없이 유동심도, 속도, 압력을 예측할 수 있으며, 격자 기반의 모델로서 GIS 및 기타 응용 프로그램들과 연동이 쉽다는 장점이 있다. 그러나 하상침식에 의해 유발된 토석류의 체적 증가는 고려 할 수 없으므로 토석류의 전파 및 퇴적영역에서의 토석류 모의에만 사용할 수 있는 단점이 있다. 이 연구의 목적은 FLO-2D 소프트웨어를 이용하여 우면산에서의 토석류 현상을 재현하는 것이다. 우면산 일대에서 발생한 토석류 중 서초구 방배동의 래미안 아파트 부근에서 발생한 토석류에 대하여 수치지도(DEM)와 현장조사를 통해 얻은 지형자료, 해당 지역의 강우량 및 지질 특성 자료 등을 토대로 FLO-2D 모델을 적용하여 토석류의 흐름특성을 검토한다. 토석류 유동 및 퇴적에 대한 가용한 현장관측 자료와의 비교 분석을 통하여 토석류 특성 값을 산정하고, 모델의 적용성을 검증한다.

  • PDF

Run-out Modeling of Debris Flows in Mt. Umyeon using FLO-2D (FLO-2D 모형을 이용한 우면산 토석류 유동 수치모의)

  • Kim, Seungeun;Paik, Joongcheol;Kim, Kyung Suk
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.33 no.3
    • /
    • pp.965-974
    • /
    • 2013
  • Multiple debris flows occurred on July 27, 2012 in Mt. Umyeon, which resulted in 16 casualties and severe property demage. Accurate reproducing of the propagation and deposition of debris flow is essential for mitigating these disasters. Through applying FLO-2D model to these debris flows and comparing the results with field observations, we seek to evaluate the performance of the model and to analyse the rheological model parameters. Representative yield stress and dynamic viscosity back-calculated for the debris flows in the northern side of Mt. Umyeon are 1022 Pa and 652 $Pa{\cdot}s$, respectively. Numerical results obtained using these parameters reveal that deposition areas of debris flows in Raemian and Shindong-A regions are well reproduced in 63-85% agreement with the field observations. However, the propagation velocities of the flows are significantly underestimated, which is attributable to the inherent limitations of the model that can't take the entrainment of bed material and surface water into account. The debris flow deposition computed in Hyeongchon region where the entrainment is not significant appears to be in very good agreement with the field observation. The sensitivity study of the numerical results on model parameters shows that both sediment volume concentration and roughness coefficient significantly affect the flow thickness and velocity, which underscores the importance of careful selection of these model parameters in FLO-2D modeling.

NSI 정량지수를 이용한 RAMMS 모형의 최적 매개변수 산정

  • Nam, Dong Ho;Lee, Seok Ho;Kim, Byung Sik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.112-112
    • /
    • 2016
  • 여름철 국지성 집중호우 및 태풍으로 인한 피해가 빈번하게 발생하고 있으며, 산지가 많은 국내에서는 산지지역 뿐만 아니라 도심지에서의 토석류 피해 또한 급증하고 있다. 2011년 집중호우로 인해 서울시 서초구에 위치한 우면산에서 동시 다발적으로 많은 토석류가 발생하였고 이로 인해 많은 인명과 재산피해가 발생하였다. 규모면에서 보다 큰 토석류가 이전에 강원지역 등에서 발생하였음에도 불구하고 우면산 산사태가 사회적 관심을 일으킨 것은 서울 도심지에서 발생하였기 때문이다. 이러한 토석류로 인한 피해를 줄이기 위해서는 토석류를 유발시키는 강우의 해석이 먼저 선행되어야 하며, 토사유출모의 결과의 확산면적의 정확성이 중요하다고 판단된다. 따라서 본 연구에서는 도심권(서초구 우면산) / 비도심권(춘천 마적산)을 대상지역으로 선정하였으며, 분포형 강우-유출모형인 S-RAT을 이용하여 빈도별(30년, 50년, 100년, 200년, PMP) 토석류 유발 강우를 산정하고, 토석류 2차원 수치모형인 RAMMS를 이용하여 정량지수(Quantitative index)분석을 통해 최적의 매개변수를 산정하였다.

  • PDF

Simulation Analysis of Mt.Umyeon Landslide Using Deb2D (Deb2D 모형을 이용한 우면산 산사태 모의분석)

  • Lee, Seung Jun;An, Hyun Uk;Kim, Min Seok
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.262-262
    • /
    • 2019
  • 2011년 7월 27일 서울 지역에 내린 시간당 100mm가 넘는 집중호우로 우면산 일대에 산사태가 발생하였고, 그 결과 많은 인명과 재산 피해가 야기되었다. 이러한 토석류로 인한 피해를 저감하기 위한 여러 연구가 이루어진 바 있으나, 대부분의 연구는 연행작용에 대해서 고려하지 못하고 있거나, 인명과 재산 피해의 큰 비중을 차지하는 건물은 모의 분석에 제외되어 있다. 본 연구에서는 연행작용을 고려할 수 있는 Deb2D 모형을 이용하여 하류부에서 토석류의 유동을 건물의 유/무를 구분하여 분석하였다. 우면산 북측사면의 산사태 전 후의 항공 LiDAR DEM을 활용하여 DB를 확보하였고, 추가적으로 수치지형도를 통해 얻은 피해지역 건물들의 형상을 Deb2D 모형에 적용하여 실제 환경과 가까운 모의를 수행하였다. 이러한 자료들을 바탕으로 Deb2D 모형을 이용한 토석류 유동의 분석 및 모의실험을 진행하였고, 발생 지역의 정보가 부족하다는 점을 고려하여 지질특성에 따른 매개변수를 다양한 값으로 산정하여 토석류의 유동을 비교 분석하였다. 건물의 유/무에 따른 토석류 유동의 차이는 유역 하류부인 피해지역에서 모의실험을 통해 나타났다. 이러한 결과를 통하여 연행작용과 건물의 정보를 분석 모형에 추가함으로써 실질적인 인명과 재산 피해를 예측하고, 예방할 수 있을 것으로 기대된다.

  • PDF

Topographical Analysis of Landslide in Mt. Woomyeon Using DSM (DSM 자료를 이용한 우면산 산사태 지형 분석)

  • Kim, Gihong;Choi, Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.12
    • /
    • pp.60-66
    • /
    • 2020
  • Torrential rain causes landslide damage every year. In particular, the 2011 downpour caused landslides at numerous points throughout Mt. Woomyeon, which resulted in considerable damage to people and property. Because it occurred in an urban area, this case became a major social issue and received public attention. Measures were quickly implemented for multilateral investigations and recovery. Landslides caused by heavy rain are greatly affected by rainfall at the time. Landslides from the upper part erode the flow path, increasing the size, causing much damage to the lower part. This study selected a rural village area among the damaged areas of Mt. Woomyeon, and analyzed the change in terrain profile before and after a landslide using the DSM data obtained from airborne LiDAR. This area can be divided into three hydrological basins. For each basin, the analysis was performed on the average slope of each part of the flow path, as well as the erosion and deposition due to soil flow. As a result of the analysis, it was estimated that the total amount of soil from the Jeonwon village was 15,300㎥. These field data based on GIS can be used as basic information to predict damage in the case of a similar disaster, and it can be helpful in analyzing the results of various debris flow simulations.